woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Again some special glassware
My Belgian friend again received a nice piece of glassware and made a picture of this. It is a simple object.
The tip of the tube (near its bottom) is closed and the two side-arms near the bottom are open. At the top, the tube also is open. That's all.
Any idea of its intended use?
|
|
|
UnintentionalChaos
International Hazard
Posts: 1454
Registered: 9-12-2006
Location: Mars
Member Is Offline
Mood: Nucleophilic
|
|
I can't think of anything immediately, but is it possible that this is a glassblower's blank and is intended to be formed or attached to some other
piece to give it some functionality? I have seen blanks for ground glass joints before, which often have a good deal of plain tube attached to them
which can be used or removed as necessary for the finished piece.
Department of Redundancy Department - Now with paperwork!
'In organic synthesis, we call decomposition products "crap", however this is not a IUPAC approved nomenclature.' -Nicodem
|
|
|
Ozone
International Hazard
Posts: 1269
Registered: 28-7-2005
Location: Good Olde USA
Member Is Offline
Mood: Integrated
|
|
It looks like there is a ring on the top. If that is true, it tends to argue against this piece being a blank. All of the blanks I have seen are
straight and unfinished.
Other than that, your guess is as good as mine. A flow cell with a thermo or probe well? Or maybe a "distribution funnel"?
Cheers,
O3
[Edited on 4-1-2009 by Ozone]
-Anyone who never made a mistake never tried anything new.
--Albert Einstein
|
|
|
thefips
Harmless
Posts: 33
Registered: 6-3-2004
Location: Germany
Member Is Offline
Mood: self destructive 
|
|
It could be (only a thought) something to introduce a substance into a flow of a liquid solvent. on the left a solvent could be introduced, on the
right it flows out into a reaction app.
When the left and the right are closed with stoppers and glastubes or hoses, a solid substance could be placed into the small closed tube at the
bottom. when a solvent is filled in the tube an the tube is closed with a stopper at the top, a flow of solvent from the left to the right or vice
versa would probably lead to turbulences around the solid and you would get a solution of the solvent.
... only a thought...
|
|
|
Pomzazed
Hazard to Self
Posts: 57
Registered: 15-9-2008
Location: In th' Lab
Member Is Offline
Mood: Acylated
|
|
To me it looks like a chromatographic column. Add the missing teflon stopcock at the lower side holes and there you go. According to size it looks
like a column for 100mmol scale synth?
Don't stare at me making fumes... I'm just experimenting with some gas...
|
|
|
nitroglycol
Hazard to Self
Posts: 56
Registered: 28-10-2005
Location: close to the centre of North America
Member Is Offline
Mood: curious
|
|
Yeah, it looks like a column or burette that wasn't completed to me.
WARNING: Do not urinate on distributor while engine is in operation.
|
|
|
Sedit
International Hazard
Posts: 1939
Registered: 23-11-2008
Member Is Offline
Mood: Manic Expressive
|
|
A blank for a seperation funnel would be my vote. The two holes are for the placement of the stopcock.
Just a guess but I have a friend of mine that does this sort of work, Im going to draw him a picture and see if he is able to tell me what it may be
used for.
|
|
|
Panache
International Hazard
Posts: 1290
Registered: 18-10-2007
Member Is Offline
Mood: Instead of being my deliverance, she had a resemblance to a Kat named Frankenstein
|
|
i have many pieces of glassware that puzzled and perplexed me until one day i was musing to my very dry and serious swiss glassblower regarding
something and he told me that often apprentices glassblowers would be given things to make, without function, but were the most effective way to learn
a particular skill. Such exercises were common during times when not much work was available for the apprentice to keep them occupied.
Then i remember all the silly copper items my father used to get his apprentices to make up in our garage when not much plumbing was to be had.
I definitely have one such glassblowing item, i use it as a fish tank, after ppondering its use for several years.
I don't know if this item is such an item, seems like too neat a job for a beginner, but who knows, maybe the apprentice was catholic and the picture
is upside-down. I have some cruffix shaped tissue grinders but the openings are all in the wrong place. Wait unless it is a blank for a tissue
grinder, that would make sense. Chemeoleo should know what they are, biosciences and all.
Just looked at the tissue grinder seems unlikely that the photo is a blank for one.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
