| Pages:
1
2
3
4 |
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
I have been doing some more experiments with the reaction between ascorbic acid and CuSO4 recently. I have pure acsorbic acid now, so no more
problems with purity .
Using 5g vitC and 10g CuSO4, a dark precipitate of copper powder is produced(much more than in my previous experiments). However it takes a long time
to settle. The green solution left over is what I have mainly been experimenting with.
1. Green solution +NaOH results in an orange/yellow precipitate.
2. Green solution + HNO3 results in a solution the normal Cu2+ colour(light blue)
3. Solution produced in 2 +NaOH results in the same precipitate as in 1
4. Green solution + Zn results in a black precipitate and bubbling (the most confusing result so far)
5. Green solution +Na2CO3 results in a green precipitate
[Edited on 4-9-2005 by rogue chemist]
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
1. Cu2O.
2. NO3- oxidizes to Cu++.
3. This suggests it isn't Cu(I) leftover in 1. Maybe the ppt is a complex?
4. How acidic is the solution, and pure the Zn? Most of the time when I'm dissolving Zn it leaves a black colloid, probably copper and other
insoluble constituents of the 90% alloy.
5. Malachite?
Tim
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
It is pure zinc powder and I have never gotten any black matter while dissolving zinc. Also the hydroxide ppt looks nothing like Cu2O, way too
yellow.
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
You sure? That's what I thought first time I made Cu2O. It starts almost yellow then runs to orange then red as the crystals grow, if they
continue growing.
Ok, pure zinc? No idea on that!
Tim
|
|
|
woelen
Super Administrator
Posts: 8014
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
| Quote: | | Using 5g vitC and 10g CuSO4, a dark precipitate of copper powder is produced(much more than in my previous experiments). However it takes a long time
to settle. |
Are you sure it is copper and not some copper (I) compound (e.g. impure Cu2O)? Add some of this dark stuff to dilute HCl. If it is copper it will not
dissolve, otherwise it may become white and eventually will dissolve.
| Quote: | The green solution left over is what I have mainly been experimenting with.
1. Green solution +NaOH results in an orange/yellow precipitate.
2. Green solution + HNO3 results in a solution the normal Cu2+ colour(light blue)
3. Solution produced in 2 +NaOH results in the same precipitate as in 1
4. Green solution + Zn results in a black precipitate and bubbling (the most confusing result so far)
5. Green solution +Na2CO3 results in a green precipitate |
1. Indeed Cu2O, possibly in a hydrous form.
2. The blue color is due to Cu(2+), but certainly not all copper is oxidized to the +2 oxidation state. I doubt whether the HNO3 is oxidizing it,
unless it is very concentrated. Usually oxygen from the air oxidizes the stuff. Copper (I) is colorless and copper (II) is blue. In nitric acid and
sulphuric acid, the mix also is blue. In hydrochloric acid, however, you'll get deep brown, almost black complexes of mixed valency (cations, with
multiple copper ions in it, and with an oxidation state both of +1 and +2 in a single cation). I have done quite some research on copper chemistry and
put all my findings on my website, see this link
Another observation I have made is that copper (I) complexes seem to reverse react in strongly acidic environments, which are not coordinating to
copper (I), such as nitric acid or sulphuric acid solutions. Copper (II) ions and ascorbic acid can coexist pefectly at very low pH.
3. This can easily be explained. The blue solution contains copper (II) and free ascorbic acid. On addition of excess NaOH, this reacts again to
yellow cuprous oxide. The addition of alkali strongly shifts the redox potential for copper (II) to copper (I). This is why at low pH the blue copper
(II) remains in solution, while at high pH the copper (II) is reduced by the ascorbate, formed in the alkaline solution.
4. Not easy to explain. The bubbling most likely is due to some acidity, but the black stuff I cannot easily explain. My guess would be that this is
very impure copper metal, formed at the zinc metal surface. Zinc may also reduce other stuff in solution and this may give rise to the black stuff.
5. What kind of green color? Is it a bright cyan green color, or a darker moss-green or brown-green color. The cyan compound is basic copper
carbonate, if the precipitate is dark green like some moss plants, then it is copper carbonate, mixed with copper (I) compounds. It is remarkable what
the combination of copper (I) and copper (II) in a single compound does with its color. It impairs a very dark green/brown color to such compounds.
I also have done quite some experimenting with copper (I) oxide. I found a relation between the speed of formation and the color. Fast formation
--> bright yellow, slow formation --> brick red. All colors from bright yellow through several oranges to brick red can be made. See the
following two pictures I made of a copper (I) solution and the two extremes of the copper (I) oxides.
Copper (I) solution in dilute ammonia, which is oxidized by oxygen from air, forming the deep blue tetrammine complex.
http://woelen.homescience.net/science/chem/solutions/cuI-2.j...
Yellow Cu2O:
http://woelen.homescience.net/science/chem/solutions/cuIoh.j...
Red Cu2O:
http://woelen.homescience.net/science/chem/solutions/cuIoh-2...
What I found is that making pure copper metal from solutions is not as straightforward as I liked. One process, which gives very fine pure copper
metal is preparing such a solution in ammonia, as shown in the first picture and then adding a solution of sodium dithionite. Then pure copper metal
is formed. First the liquid becomes blue when viewed through transmitted light and red when viewed with reflected light. Later it becomes turbid and
metallic copper settles at the bottom as a very fine brown powder.
Another way is to dissolve copper (II) sulfate or copper (II) chloride in dilute hydrochloric acid and adding sodium sulfite and heating a little.
This gives rise to larger crystals of copper metal, but this procedure seems to be somewhat unreliable. I have tried multiple times and not always
does it produce copper metal.
<!-- bfesser_edit_tag -->[<a href="u2u.php?action=send&username=bfesser">bfesser</a>: fixed
external link(s)]
[Edited on 7/22/13 by bfesser]
|
|
|
neutrino
International Hazard
Posts: 1583
Registered: 20-8-2004
Location: USA
Member Is Offline
Mood: oscillating
|
|
2. I’m guessing that one of the byproducts of the initial reaction is some kind of ligand that complexes unreacted Cu<sup>2+</sup> ions,
forming that green color. Adding a strong acid causes the free H<sup>+</sup> ions to displace the copper ions from their complex, leaving
blue Cu<sup>2+</sup> ions floating around.
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
1. After looking at your pic wolean, the result is indeed Cu2O.
2. It was 70% HNO3 added to to the green solution
4. I will do more tests later today
5. Olive green
It indeed is copper powder produced as I washed it with 31% HCl without any dissolving. We discussed this a few pages back I believe, and Chemoleo
found it conductive as well.
|
|
|
bluebriant
Harmless
Posts: 3
Registered: 29-11-2008
Member Is Offline
Mood: No Mood
|
|
Bright metallic concentrate
I have had some success using the CUSO4 + Ammonia + ascobic acid method to precipetate copper powder. However, the powder ends up looking black. I
would like to precipitate a bright metallic powder. Is this possible?
|
|
|
Jor
National Hazard
Posts: 950
Registered: 21-11-2007
Member Is Offline
Mood: No Mood
|
|
I have very fine lab-grade copper powder. It's BLACK as well!
It actually stains my fingers when I touch it.
Is this even more fine than the red superfine copper powder, you guys are talking about?
|
|
|
bluebriant
Harmless
Posts: 3
Registered: 29-11-2008
Member Is Offline
Mood: No Mood
|
|
Yes I think it is copper, but is so fine so as not to be able to reflect the wavlength of the copper powder. Perhaps the precipitate needs to be
produce more slowly...?
[Edited on 30-11-2008 by bluebriant]
|
|
|
Nerro
National Hazard
Posts: 596
Registered: 29-9-2004
Location: Netherlands
Member Is Offline
Mood: Whatever...
|
|
An experiment I did years go involved dissolving Mg shavings in ascorbic acid. The resulting substance dissolved completely in water and was much more
reactive than just ascorbic acid or Mg shavings. Addition of this solution to a concentrated solution of CuSO4 in water reacted immediately to form a
yellow-brown precipitate which then slowly converted into copper precipitate. This copper was exceedingly fine and once dry it got into absolutely
everything!
#261501 +(11351)- [X]
the \"bishop\" came to our church today
he was a fucken impostor
never once moved diagonally
courtesy of bash
|
|
|
bluebriant
Harmless
Posts: 3
Registered: 29-11-2008
Member Is Offline
Mood: No Mood
|
|
Interesting...Unfortunately I think I need to produce copper in a more cystalline form (rather than amorphous). This will probably need some sort of
cyrstalline promotor of sorts, e.g. a sodium silicate matrix?
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
You'll get metallic crystals from cementation (e.g. powdered zinc). Good old fashioned sintering of the colloidial powder (under hydrogen at maybe
>600°C) will of course do something, although it may just stick together as a solid lump.
I've got fine copper before, but I can't quite remember why. Maybe it was Cu2O I dissolved in H2SO4 (which disproportionates to CuSO4(aq) and Cu(s)).
Tim
|
|
|
Ketone
Harmless
Posts: 17
Registered: 24-8-2008
Member Is Offline
Mood: Dipolar
|
|
That's pretty cool. Nanozized Cu.. Nice. Never even thought of reducing copper(II) salts with ascorbic acid..
(Seems like one often overlooks those conceptually simple but useful reactions for some reason..)
This could be quite useful and seems v. easy if done right and pure ascorbic acid is used..
Luckily I can get it undiluted it at the grocery-store for a few dimes here. 
Though for those that can't...
Shouldn't Oxalic acid work too? I think it's also more widely available as a pure chemical than ascorbic acid, as it's sold as a rust remover.
|
|
|
Amos
International Hazard
Posts: 1406
Registered: 25-3-2014
Location: Yes
Member Is Offline
Mood: No
|
|
I'd really like to revive this thread in order to explore what was in that lovely green solution. Incidentally I made copper powder in this same
fashion after hearing about it somewhere else, and now I have loads of the solution left over. Did Davster ever finish his tests? Whether he did or
didn't, it would be nice if we at least had an equation relating the reduction of copper sulfate by this method; it's a bit beyond me. I'm quite
curious as to where those sulfate ions went.
|
|
|
Praxichys
International Hazard
Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline
Mood: Coprecipitated
|
|
Dry nano-scale copper powder is easily made from the thermal decomposition of copper oxalate as well. This might prove to be more convenient.
http://eprints.ru.ac.za/9A209DE9-8E5C-4C44-AFD6-ABEBE0F5547D...
|
|
|
Amos
International Hazard
Posts: 1406
Registered: 25-3-2014
Location: Yes
Member Is Offline
Mood: No
|
|
Oh yes, the oxalate method is great for metal powders, they're even so fine they're pyrophoric sometimes, as in the case of iron. I'm probably going
to make a new thread so that this question of the green leftover solution from the Ascorbic acid method gets some proper attention.
|
|
|
opendna
Harmless
Posts: 2
Registered: 5-7-2014
Member Is Offline
Mood: No Mood
|
|
I'm going to hypothesize a formula which seems to be consistent with my observations. Open to correction.
CuSO4*5H20 + C6H8O6 = Cu+ + H2SO4 +
C6H6O6 + H2O
copper sulfate + ascorbic acid = copper + sulfuric acid + dehydroascorbic acid + water
(cross-posted here)
|
|
|
| Pages:
1
2
3
4 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
