Pages:
1
2 |
Picric-A
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline
Mood: Fuming
|
|
Common accidents in the lab and how to avoid them
I found this video an i realised it would be a great topic to start about accidents in the lab:
http://video.google.co.uk/videoplay?docid=567670423497427135...
I am sure everyone has had accidents in the lab, however small
If you feel up to it, please share them here!
About a year ago (when i was young and stupid ) i bought a bottle of drain
cleaner (conc sulphuric acid) I decided to store it as a 50% soloution so i added all the drain opener (1.5L) to a 5liter beaker. To the conc
sulphuric i added around 1.3 liters of water :O The next thing i knew was the beaker was sprewing out steam, H2SO4 and goodness knows what Remember AAA! ![:)](./images/smilies/smile.gif)
[Edited on 17-9-2008 by Picric-A]
|
|
12AX7
Post Harlot
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Excellent clip. And hot chicks doing chemistry is really hot (even with the British accent).
Tim
|
|
Formatik
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 927
Registered: 25-3-2008
Member Is Offline
Mood: equilibrium
|
|
The most basic thing to do is have a look at the MSDS sheets and look at the incompatibles and hazards and that will help avoid the large majority of
accidents. Then there are books like Bretherick's Reactive Chemical Hazards (here), that go more into detail. Taking the right precautions is also what will make sure that one of those accidents doesn't affect you.
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
Especially with a british accent!
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
Picric-A
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline
Mood: Fuming
|
|
haha, funny she has to go out for the exploding H2 then it doesnt work
|
|
panziandi
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 490
Registered: 3-10-2006
Location: UK
Member Is Offline
Mood: Bored
|
|
HaHa I had a similar problem with the bloody CuO/Mg thermite!
"and at number 8, yes its not banned it's white phosphorus"
[Edited on 18-9-2008 by panziandi]
|
|
Jor
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 950
Registered: 21-11-2007
Member Is Offline
Mood: No Mood
|
|
A few nasty things.:
1.
In the preparation of potassiumperoxochromate, the liquids were not cold enough. When adding H2O2, the liquid began bubbling vigorously, spuwing
aerosols of carcinogenic chromium in the air. Immediatly set erlenmeyer outside. next i took a botlle of K-metabilsulphite quikly, took a gram, added
conc. HCl, and carefully inhaled the SO2, for a minute or so, at non-irritant concentration.
2.
preparing bromine. Lost the smell for it that day. So didn't realize exposure. Got some pain in my nose after.
3. Throwing some very fine copper powder in conc. nitric acid outside. it spuwed at once 300ml of pure NO2, in like 1 second, really surprised me.
Didn't get hurt.
4. When disposing of a bisulphite solution, I didn't expect that cloud of SO2 coming out of solution when pouring it in the sink. Hit me hard in the
nose, quite freshning. Lost my cold though ![:D](./images/smilies/biggrin.gif)
5. Creating about 5 grams of nickel carbonyl and venting it in a closed room. I breathed it all, but survived.
Stupid mistake, not dangerous:
Beaker was hot, and I wanted to cool it. At that moment I forgot it would ofcourse break when touching cold water. And it did. Worth 3 EUR.
I'm not doing home chemistry very long now, but I'm getting more and more experience quickly. These mistakes will not be made again. However,
considering the things I sometimes use, I did not do to bad, as these were my only real accidents. There is no very dangerous situation. The most
uncomfortable experiment I do is preparing bromine. Even when putting a fan (a blower, the ones you put ina bedroom for cooling) in front of the door
with my working table between the fan (mine is very powerful) and door, you still smell it, and may become irritant (irritant is <10ppm). I try to
do the synthesis very quickly, producing about 2mL's a run (I use very small amounts in micro-experiments, and making larger batches is too
dangerous), in about 10 minutes. I guess average exposure 10 minutes is a few ppm, its non-irritating, but smells horrible.
between door and
Ofcourse, 5 is a joke ![;)](./images/smilies/wink.gif)
[Edited on 18-9-2008 by Jor]
[Edited on 18-9-2008 by Jor]
|
|
panziandi
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 490
Registered: 3-10-2006
Location: UK
Member Is Offline
Mood: Bored
|
|
Good job its a joke!
The human nose is VERY sensitive to the odour of the halogens, indeed bromine comes form bromos the Greek for stench!
I have had few accidents:
1) squirting alcohol onto CrO3 lighting it with a match then after extinguished squirting more onto the CrO3 only to find it ignite shoot back into
the bottle and blow it out of my hand and deafen me for a bit (and my onlookers!), that was just after being told by my gramps "hope you aren't doing
anything that will explode or disturb the neighbours" ... it was like a percussion grenade!
2) wrapped PVC tape around my PCl3 bottle only to have the lid break apart and the PCl3 spill... mainly on my bench but some on my hands and I was
worried if it was on my face/clothes so I ran for a shower! Luckily I wasn't burnt but I could smell it all day!
3) adding MeOH SLOWLY to H2SO4 but forgetting that methanol boild a *little* lower than water so I should have been adding it slower with cooling,
eventually superheated acidic methanol shot out, luckily not in my direction as I wasn't wearing goggles :O
4) I heated a flask of ammonium acid phosphate to fusion and then let the ammonia all come off (as best I could never got complete reaction) then I
put the beaker on the patio paving slab only to have it shatter and spill the phosphoric acid... cleaning the slab woo
5) I heated the ammonium acid phosphate in the kitchen with the window and door open (ok I was like 14 here!) fumigating myself with ammonia (also
used to regularly melt lead in a similar manner!)
and just for luck:
6) I made formaldehyde-thymol polymers on my bedroom windowsil in test tubes over the period of months... I later noticed my eyesight had deteriorated
and a couple of years later I ended up getting glasses! Not that I wear them now thank god for 70+% water based contacts
|
|
kclo4
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 916
Registered: 11-12-2004
Location:
Member Is Offline
Mood: No Mood
|
|
1) Adding NaOH to fast to an Ammonium Salt is always an enjoyable mistake.
2) Never twist a ground glass stopper ![:P](./images/smilies/tongue.gif)
3) Spilling I2 crystals, and then later getting them on you later
4) Leaving water in your condenser, in a place that freezes ![:(](./images/smilies/sad.gif)
5) Other obvious ones
|
|
Picric-A
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline
Mood: Fuming
|
|
haha i remember a accident i had,
i was preparing bromine by heating pool bromine tablets to decomp:
I think a runaway reaction happened becuase it was spewing out yellowish vapour everywhere! I dont know what the vapour was but sure as hell made me
cough, eyes water and it stank out my lab for 3 days! :O
wont be trying that again lol!
I have done the NaOH/NH4NO3 accident aswell! smelt bad
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
On the most frightening chemical experience was H2S intoxication, which related in a thread here...
Thes econd must be adding ~15mL of diluted pirahna solution to a acid recovery bottle, containing mainly diluted aqua regia. I was cleaning some glass
frits with carbon, dilute dthe pirahna when done, cleaned up the bench, emptied the pirahna into the acid recovery bottle, slide the sash donw
completly (thank god), and when into the office to do some paper work. A few minutes after, one of the post grads working in the same lab arrives in a
panic asking me what kind of reaction I was doing, and I answered none.
He then relate dto me how he entered the lab, heard a "shhh.." noise, turned around and saw my fume hood burst into a brown/red cloudy, whith liquid
everywhere inside, and a very irritating smell comming out... He quickly opene dall the windows, closed the doors, and when to fetch me.
I was stunned to see acid dripping from all other the hood, the meatl support bars litteraly bubbling off, etc The Nox cloud was removed fairly
quickly by the very effective ventilation (the hood was only a couple month old...), and after waiting a a few hours to get most of the fumes out, it
was washing time.. I rinced the whole hood with a hose for 10min, then started disassembling all the equipement, tossing the damaged things, and
washing the others... Even after sending over 200L water in the hood, the drops falling on my lab coat eat through it (and my sweater). Took we
nearly a whole day toget everthing back on!
And during all that time I realized how lucky I was that:
-the bottle didn't explode (the lid was unscrewed obviously, the the pressure and foaming was justtoo powerfull) when I was working
-that I did take the sash down entirely (which alot of people don't do, now this story is told to make them think about it ) when I stopped working
-that another member of the lab didn't open the sash to get soemthing in the hood at the time it blew off
-that I had no other chemicals under the hood at the same time (imagine if I was distilling ether over benzophenone ketyl in a 5L flask!)
I was very surprised about the fact that the reaction kicked in nearly 10min after adding the acid, and that there was no heating or sizzling when it
was added..
Apart from that (hopefully, other anecdotes are not even close to these two..), I did burn my hands with NaOH once, when unplugging a sink....
Re-used some gloves (no mor eleft), but put them on the wrong side, and realied it 30min after when my hands were starting to get painfull and my skin
to wrinkle).
One of the most common source of concern in actually oil baths. They can heat up quite high, and are not always as stable as we think... Hopefully, I
was never burnt, but did drop a flask containing pet ether in a 120°C oil bath, the bubbling (and splattering of hot oil) was pretty impressive... I
put one the face shield and thick base-bath gloves and fished it out before too much vapors would have caused a fire hazard (gas-heated boiler only a
few meters away...)
Of course,w e all learn from our mistakes, but i think the most important point to avoid them is to take your time and thinks things ahead... Saving
a few seconds or minutes is not worth getting intoxicated, burnt or blinded!
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
One thing, which I recently did was adding solid NaH (yes, NaH, not NaOH!) to 65% HNO3. The spatula of solid went into the HNO3 and as soon as it
touched there was a very brief sizzle and then a bright orange flash and BANG
The test tube cracked and droplets of HNO3 were sprayed around.
Nothing bad happened though, quantities were small (100 mg of solid plus 1.5 ml of liquid). I only was quite upset after this little accident.
|
|
kaviaari
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 80
Registered: 21-12-2005
Location: Finland
Member Is Offline
Mood: Going green
|
|
Pouring water too fast to extinguish remains of sodium borohydride in a 1 l beaker, containing about 250 ml of reaction mixture in ether, was one of
my greatest mistakes. For some reason I didn't think about the process and dumped in some 100 ml of cold water, well enough to get ether boiling and
splattering all over the lab bench and, naturally, on me. The remains of borohydride in the solution reduced the pigments of my red t-shirt, giving an
artistic reddish white shade to it. Now I'm a bit more careful with borohydride.
[Edited on 19-9-2008 by kaviaari]
|
|
chemrox
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2961
Registered: 18-1-2007
Location: UTM
Member Is Offline
Mood: LaGrangian
|
|
I was using AgNO3 to visualize pesticide spots and left the solution of ammonia and AgNO3 in the sprayer which had a ground glass joint. I forgot
what we did exactly to clean up and avoid explosion but it involved welding gloves and nitric acid. More recently made up too much Pirhana and
overran the container ...
"When you let the dumbasses vote you end up with populism followed by autocracy and getting back is a bitch." Plato (sort of)
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
What is the explosion hazard from AgNO3 and NH3? I don't remember hearing from this? We clean dark Ag stains with NH3 all the time... (though it's
dilute I guess)
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
Fleaker
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1252
Registered: 19-6-2005
Member Is Offline
Mood: nucleophilic
|
|
@Klute,
Supposedly ammoniacal solutions of silver nitrate (and less so, other silver salts soluble in ammonia) are to be avoided because of the formation of
sensitive silver compounds (silver nitride seems most likely) dubbed fulminating silver. I've heard that they should be kept around for less than a
few hours, then neutralized with acid (preferably HCl) to an insoluble precipitate. I follow this practice for silver nitrate ammonia system, but
never for silver oxide or chloride dissolved in ammonia, I've stored that for months!
As for your experience with Caro's acid and aqua regia--shocking!! I don't understand it--was there heavy contamination of organics in the aqua regia.
I've used 30% hydrogen peroxide (quite frequently) with hot, concentrated aqua regia solutions when dissolving Pt and never had a reaction like you
describe. Granted Caro's acid is a different beast, but still, I know peroxide and aqua regia can be done safely.
Neither flask nor beaker.
"Kid, you don't even know just what you don't know. "
--The Dark Lord Sauron
|
|
chloric1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1090
Registered: 8-10-2003
Location: GroupVII of the periodic table
Member Is Offline
Mood: Stoichiometrically Balanced
|
|
ammoniacal silver
My silver waste was dissolved in ammonia and I forgot it for 3 days. Luckily, it was also exposed fully in midday sun so only brownish silver powder
separated.
Fellow molecular manipulator
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
After relating my experience to several well-experienced chemists, they all told me HNO3 and H2O2 is an absolute no-no... Remeber this was a DILUTE
solution of aqua regia, all the depleted (colorless to slight yellow) used acid been added, with at least 200-300mL water added to the bottle at the
begging.. . I wasn't the onyl one using this bottle, it is highly psosible some un-diluted aqua regia was added on several occasions, but that's still
far from concentrated.. and the pirahna (35% H2O2, 98% H2SO4) was aslo dilute dbefore adding tot he acid recovery bottle... So I would advise you
to be extremly precautious with such mixtures! Better stick with HCl and H2O2?
Also, chances are there was traces of transistion metal salts present, as we work with these very often, and it's pretty common to attack traces of
insoluble complexs with aqua regia from a glass frit for example. Maybe these could haev had something to do with the delayed reaction or soemthing,
but it is still traces....
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
Picric-A
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline
Mood: Fuming
|
|
I remember i was cleaning a beaker with pirrana, it looked quite clean alredy apart from a few carbon smudges here and there so i slowly pippeted the
pirrana in, at fist it just fizzed and then it started spraying steam and possibly H2SO4 everywhere!!! i still dont know what was in that
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
...organics?.. I know it is discussed fairly often, but pirahna should a kind of last-ressort thing..... It shouldn't be prepared in more than 5mL
amounts IMHO, and diluted immediatly after use. I hear of more accidents using this solution than any other acid mixtures..
It doesn't tolerate even minute amounts of organics, even toilet paper will catch fire after a few seconds contact, I wouldn't want to see what
happens if 5-10mL are spilled on a wood bench...
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
Picric-A
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline
Mood: Fuming
|
|
I once did a controlled addition of around 2 ml of Pirahna onto a small block of wood with a indent to support the liquid.
Nothing happened for the first few seconds until i noticed considerable bubbling... using a infrared thermometer the tem was recorded to be aorund
80degrees C... above the boilig point of H2O2 and shortly after recording the temp i heard (not saw... strange...) a small explosion!
now if that was on larger scale there must surly be a Peroxide explosion..
|
|
Jor
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 950
Registered: 21-11-2007
Member Is Offline
Mood: No Mood
|
|
Today I wanted to fill a empty brown JTBaker bottle with 36% HCl. So I took my 5L container 36% HCl reagent grade.
I took a funnel, placed it on the bottle and placed a blower next to it pointing at the door to blow the fumes away. Now, I don't have experience with
36% HCl, only 32%, and certainly not 5L. When I opened it a HUGE cloud of HCl escaped and I started pouring. Half a liter done, I stopped and took a
breath. COUGH COUGH. Then when the fumes were gone, I tried again quickly. When I was done, I had to clean up spils with bicarbonate (very hard to
pour without splashing with 5L !). It was an experience I will remember as 2 words: COUGH COUGH!
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
I should use those PP hand pumps for gasoline to empty large containers of corrosives or toxics. They work very well. Keep one for each jerrican, as
they are pretty cheap, and just rince them with water (for the HCl) by empying a 2L bottle tap water, followed by some dH2O or similar in the sink. A
little dH2O in the compartiments won't ruin your acid next time you fill in a 1L bottle.
Hardly any fumes, no spills, and no tilting 5kg jerricans..
![](http://pan.priceminister.com/photo/275552581_L.jpg)
You also have the more elaborate versions:
Manual solvent pumps
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
epeters
Harmless
Posts: 3
Registered: 9-10-2008
Location: LA
Member Is Offline
Mood: No Mood
|
|
here is one from personal experience: when drying parts that have been soaked in alcohols, do not place them in an oven until they are 100% dry, even
if the oven temp is below flash points! i lit my parts on fire in a 100C oven once, because the fumes got back lit by the oven's heater elements.
|
|
Picric-A
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 796
Registered: 1-5-2008
Location: England
Member Is Offline
Mood: Fuming
|
|
No offence but you would have to be retarded to put anything flammable and volatile in an oven :O
ur lucky it only caught on fire and didnt turn into a small fab.
A recent mistake of mine, whilst filling a burette with HCl for a titration using a funnel i was watching the level increase in the burette,
forgetting to constantly minitor the level in the funnel (constantly filling up the funnel), as you can probably guess, when it got to the top i
stopped pouring the HCl but the funnel was full and spilt everywhere, runing my titration ![:(](./images/smilies/sad.gif)
easy to make mistake i guess... i need to be more carfull!
|
|
Pages:
1
2 |