Pages:
1
2
3
4 |
Skrinkle
Harmless
Posts: 23
Registered: 18-6-2008
Location: Missouri
Member Is Offline
Mood: Curious
|
|
Quote: | Originally posted by rooster
YESSS! Finally I found microcrystalline cellulose at a lab. It is like powder. When you nitrate it for use as a HE, it is hard to compress the
nitrated "cotton wool" type. Also it will be easier to handle.
One question...
Why isn't there any nitrating procedures for NC with 99% HNO3 and H2SO4? I heard 70% HNO3 is more oxidizing than 99%, if so, wouldn't there be less
oxydated, unwanted byproducts of cellulose when nitrate with higher % acids? |
Rooster:
I think that 68-70% nitric acid is easier to come by. It is for me anyway.
|
|
Microtek
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 849
Registered: 23-9-2002
Member Is Offline
Mood: No Mood
|
|
It is actually quite easy to make MCC yourself. Boiling cotton wool in ca. 10 % HCl for about 2 hours will produce a nice fine powder with properties
that are consistent with MCC. The yield from the process was ca. 80 % when I tried it and the product could be compressed into qan extremely durable
pellet at moderate pressures. It was fairly easy to nitrate but had a tendency to clump when added to the mixed acids. When NG was added to the
nitrated MCC it formed a granular colloidon over a few hours. This granulate could be pressed whereupon it flowed plastically and formed a single
body. Great for propellant grains for rockets (if you can solve the other technical problems of NG/NC based rockets).
|
|
specialactivitieSK
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 94
Registered: 21-10-2014
Member Is Offline
Mood: No Mood
|
|
Methods for making spherical particles of cellulose nitrate : http://www.google.com/patents/US2915519
EXAMPLE III 60 grams of cellulose nitrate (13.55% N) were dissolved in 600 ml. ethyl acetate. The lacquer was dispersed in 450 ml. water containing
9.6 grams of a petroleum sulfonate (Petromix #9) as the emulsifying agent under vigorous agitation in a homogenizer. Agitation was continued and the
ethyl acetate was removed from the dispersed lacquer particles by distillation at 22-39 C. and a pressure of 6.5 cm. The resulting cellulose nitrate
particles were 1-20 micron spheres having a density of 1.56.
|
|
Pages:
1
2
3
4 |