detritus
Harmless
Posts: 19
Registered: 27-4-2008
Member Is Offline
Mood: No Mood
|
|
How to cleave a ketone
Thanks in advance for tolerating my newbie questions here..
I wanted to know a good method to oxidatively cleave a ketone like acetone or MEK.
I was sure permanganate would do it, but my classmate assured me that acetone at least would not be further oxidized by MNO4.
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
How do you want to cleave it?
A haloform would give the acid with one carbon less. A bayer villiger on MEK (no reaction with acetone) would yield acetic acid and ethanol
(pôssibly oxidized to more acetic acid depending on the conditions) IIRC.
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
detritus
Harmless
Posts: 19
Registered: 27-4-2008
Member Is Offline
Mood: No Mood
|
|
baeyer-villiger seems like it would work just fine, thanks. any tips on an otc way to do it? trifluoroacetic, peracetic, and CPBA seem like they are
more expensive than is worth it.
http://www.organic-chemistry.org/namedreactions/baeyer-villi...
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
Peraectic, performic, or even more OTC persulfuric acid!
H2SO5 is generated from either peroxodisulfate salts (S2O8 2-) and H2SO4, or oxone/H2SO4. I have a neat patent on forming H2SO5 solution is good
yieldwith ammonium/potassium/sodium peroxodisulfate and conc. H2SO4, I'll dig it for you later one. Works great for BV oxydations.
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
Sauron
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
You can pyrolize acetone to ketene on a lab scale with a "ketene lamp" or on any scale with a tube furnace. Ketene is very reactive, corrosive and
toxic, carcinogenic, and these properties are not lessened when it is 700 C or so. This is not a procedure for a newbie.
Other than that you might get acetone to fall apart to carbon oxides and soot (soot being a byproduct in ketene process) but I do not know of any way
to get anything more useful out of it.
Sic gorgeamus a los subjectatus nunc.
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
See US 4,049,786 for preparation of persulfuric acid from peroxodisulfates and conc. H2SO4.
The attached article claims 100% yield sof ethanol and acetic acid from MEK with K2S2O8/H2SO4. This will also show you the reaction conditions used.
Attachment: JOC_35_3080-3082_1970.pdf (428kB) This file has been downloaded 1035 times
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
detritus
Harmless
Posts: 19
Registered: 27-4-2008
Member Is Offline
Mood: No Mood
|
|
thanks to both of you. no ketene for me, though - that stuff seems pretty awful.
acidified persulfate looks cheapest if i gather that correctly from your post, klute. i was just looking for other routes to basic lab stock, so i
did not want to use anything fancy. post that patent info whenever you get a chance, it seems interesting.
any tips on the BV? notes from a rxn you did?
whoops, took too long to post, you already replied! i will look at the patent for their conditions in the MEK rxn. thanks!!
[Edited on 22-5-2008 by detritus]
|
|
DerAlte
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 779
Registered: 14-5-2007
Location: Erehwon
Member Is Offline
Mood: Disgusted
|
|
@Detritus
My experience has been that permanganate will oxidize acetone, provided water is present. KMnO4 is soluble in dry acetone but will react (fairly
slowly) with a solution, assumedly to acetate and perhaps formate plus MnO2. Don't know about MEK but suspect it will also do same due to enol
formation. What product are you trying to obtain?
Der Alte
|
|
detritus
Harmless
Posts: 19
Registered: 27-4-2008
Member Is Offline
Mood: No Mood
|
|
acetate and formate, actually. i was just musing on the topic, trying to increase my knowledge of chemistry.
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
Well, for acetate, you would better be off oxidizing ethanol, no?
And you could obtained the formate by doing a haloform reaction on ethanol, giving some usefull haloform too. Just do not acidify the formate with
conc. H2SO4 if trying to get formic acid you will generate CO gas.
Using ethanol would surely be wiser economically-speaking. MEK is pretty expensive compared to ethanol. You could be able to make some propionic
acid from it with a haloform, but I think the process is much less efficent than with acetone.
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
MagicJigPipe
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
In my part of the world MEK is much cheaper than EtOH. Especially when "bulk" rates are compared.
For me anhydrous EtOH is $6.35 a gallon (95% not too much cheaper. And without denaturants it is an ungodly $15.50/L) and MEK is $4.25 a gallon.
Acetone is even cheaper at $3.35/gallon.
Hardware store rates are different but still in the same order from least expensive to most expensive: Acetone, MEK, Denatured EtOH (w/ MeOH).
Perhaps reagent grades are different?
Also, Klute, what is the "typical" method for obtaining formic acid from formates? Phosphoric acid?
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
detritus
Harmless
Posts: 19
Registered: 27-4-2008
Member Is Offline
Mood: No Mood
|
|
and don't forget the cool factor. i don't really need any of the reaction products, but to oxidize and rearrange good old acetone or MEK into an
ether is just.. well.. cool!
speaking of peracids and cool things: anyone ever see this patent?
US5462692 - Stable solid acetylperoxyborate compounds
you have to vacuum dehydrate your perborate (60C, 25mm, 1h - from another patent) to get the monohydrate, but then just add GAA and you got stable,
solid peracetyl borate.
what's it good for you say? just dump this magic powder into water for instant peracetic acid of your desired concentration. pretty neat!
|
|
not_important
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Quote: | Originally posted by MagicJigPipe
...
Also, Klute, what is the "typical" method for obtaining formic acid from formates? Phosphoric acid? |
You can use sulfuric, but only as a cold diluted acid; then distill to get the 75 percent acid (excess of formate so no free H2SO4). With calcium
formate, using concentrated HCl should give you two layers, one of fairly concentrated formic acid and the other of strong CaCl2 solution; separate
and treat the formic acid with additional formate to clean up any excess HCl.
Molinari and Pope's Treatise on General and Industrial Organic Chemistry (out of copyright) discusses using sulfuric acid, as do other old
chemistry books.
Odder methods include heating stearic acid with sodium format, while stearic acid is weaker than formic it is much less volatile so the formic acid
can be distilled out of the (messy) mixture. Oxalic acid can be used instead, but some of it may come over with the formic. Treating lead format
with H2S is another.
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
Detritus, that patent on the use of perborate to form peracetic acid is said to work very well. It tried it for a bayer villiger some years ago, and
worked very nice, although you do have a thick slurry to stir and latter filter/extract. The reaction is best conducted near 40-50°C, even up to
60°C.
There is hardly any difference when using the mono-hydrate, the amount of water introduced is still kept minimal, so you can directly use what you
have.
Basic perborate/H2O2 is said to work for Dakin type reactions, aswell as epoxidation, and perhaps BV when no other reaction si possible (it will favor
epoxidation over BV in the case of a,b-unsaturated ketone though).
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
detritus
Harmless
Posts: 19
Registered: 27-4-2008
Member Is Offline
Mood: No Mood
|
|
the most interesting thing about that patent is that you can create a dry, stable form of peracetic that can be used later. i was thinking they
wanted the monohydrate in order to push the balance over to the peracetyl borate (PAB) side rather than the aqueous peracetic side.
it seemed to me that if the mixture has too much water, most of the consitutents will exist as peracetic and degrade by the time you dry them out.
but yep, if you just want PAA right then and there, the water content is not a big deal.
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
Yes, but you would better be off storing the perborate . And just generate the
peracid (other acids can be used) when you need it
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
Jome
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 154
Registered: 10-6-2004
Location: Soutwest sweden
Member Is Offline
Mood: desiccated
|
|
How about reacting it with a sulfite to get an organic acid and a sulfonic acid, or am I missing something? (I obviously am)
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
Reacting what with sulfite? The peracetyl borate? That would just give you sulfate, acetate and borate ions..
reacting acetone or MEK will give you the addition compound of each ketone with bisulfite:
Me-C(O)-R + HSO3- --> Me-C(OH)(SO3-)-R
with R= Me for acetone and R=Et for MEK.
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
Jome
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 154
Registered: 10-6-2004
Location: Soutwest sweden
Member Is Offline
Mood: desiccated
|
|
No, the sulfite (SO3-2). I was under the impression the result would be a sulfonate of one of the R-groups, but I cannot find the reference despite 45
frenzied minutes of searching.
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
But how could a sulfite form a sulfonic acid with a ketone? Loosing a proton doesn't chang the sulfite capabilities to that extent. The only recation
would be an nucleophilic addition on the carbonyl, forming the adduct. If the pH is too high, the adduct will not form, that's why the reaction is
usually written with bisulfite, which predominates at neutral pH.
The only way of forming a sulfonic acid with sulfite would be an electrophilic addition on a carbocation, like in the Bucherer reaction, which is not going to happen here!
How would a sulfite break a CO-C bond? Leaving a O=C(R)- ? Unlikely!
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
Ephoton
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 463
Registered: 21-7-2005
Member Is Offline
Mood: trying to figure out why I need a dark room retreat when I live in a forest of wattle.
|
|
I have made a lot of formic in my time and H2S is not a pritty way to go.
I will never and I mean never try it again.
oxalic was the cheapest with glycerol and then use the cold sulfuric to
get a concentrate.
then use boric anhydride to get it near pure.
very expensive though.
I have had very little success with beayer villagers with persulfates
unless they were in acetic acid which kind of kills the whole reason to
use them.
I have found that kodak stop bath is 90% acetic acid and when mixed
with some 98% sulfuric acid and 50% peroxide found at the hydro shop.
or if you can only get 30%, slowly heat it under vacuum to around 70C as
stated some were on this board you will get a nice peracetic mix.
you can buy peracetic premade as a cleaning solvent from many cleaning companys. I can not remeber the name at the moment peroxy or something like
that but it might save you a lot of time.
it can be purchased with out id or address in large volumes as well.
I still go for performic my self as I like the smell sick arnt I.
[Edited on 14-6-2008 by Ephoton]
e3500 console login: root
bash-2.05#
|
|