Pages:
1
2 |
hector2000
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 127
Registered: 22-8-2006
Member Is Offline
Mood: Cool
|
|
Ok First Rogue Science:
I think This is Easier Method but We want Anhydrid and We need Mr Sauron method For Making Anhydrid.
******
Prepare a solution of 748 mL of glacial acetic acid, 12 mL of acetic anhydride, and 17 g of paraformaldehyde, keep this solution at 44 °C while
mixing. Prepare a second solution of 217.6 g of ammonium nitrate and 154.6 mL of 99% nitric acid in a 500-mL beaker. Prepare a third solution of 101 g
of methenamine, 157 mL of glacial acetic acid, and 296 mL of acetic anhydride in a 1000-mL beaker. Combine the third solution with 112.5 mL of the
second solution. Add this combined solution to the first solution over a 15 minute period while stirring rapidly. After the addition, continue
stirring for an additional 15 minutes. Next, carefully add 296 mL of acetic anhydride, then carefully add the remainder of the second solution, then
add another 148 mL of acetic anhydride, all while stirring. Continue the stirring for 1 hour more. After stirring, add 350 mL of hot water and reflux
the whole works for 30 minutes. After this time, cool the liquid down to 20 °C by adding ice. Decant off as much of the liquid from the precipitate
as possible and drown the remaining crystals with cold water. Filter to collect the crystals of HMX and wash them with three portions of cold water,
allow to dry. The yield is about 95%. You will need a graduated cylinder for measuring liquids, a stirring rod or magnetic stirrer for mixing, and a
thermometer to monitor the temperature.
****
-I Think to much Anhydrid Used in this Method.(Probably Will Work with less Anhydrid)
-I Found Patent That said You Should Reflux Final Mixture For 12 Hour but in the rogue we have 1 hour!
[Edited on 22-3-2008 by hector2000]
Chemistry=Chem+ is+ Try
|
|
hector2000
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 127
Registered: 22-8-2006
Member Is Offline
Mood: Cool
|
|
Well.
A collection Of Patent About Hmx:
http://rapidshare.com/files/101436161/HMX.zip.html
New Method+Picture+.. on this
Chemistry=Chem+ is+ Try
|
|
Bert
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
Quote: | Originally posted by hector2000
Ok First Rogue Science:
I think This is Easier Method but We want Anhydrid and We need Mr Sauron method For Making Anhydrid.
******
[Edited on 22-3-2008 by hector2000] |
Thanks for starting the ball rolling on this one- On your posted method, I would appreciate knowing the temperature parameters during the various
steps?
Can you provide a link to the acetic anhydride preparation methods you mention?
|
|
hector2000
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 127
Registered: 22-8-2006
Member Is Offline
Mood: Cool
|
|
In the below topic You Will Find Interesting Methods
http://www.sciencemadness.org/talk/viewthread.php?tid=8148
[Edited on 22-3-2008 by hector2000]
Chemistry=Chem+ is+ Try
|
|
hector2000
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 127
Registered: 22-8-2006
Member Is Offline
Mood: Cool
|
|
No body has Experience?
Chemistry=Chem+ is+ Try
|
|
Axt
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 778
Registered: 28-1-2003
Member Is Offline
Mood: No Mood
|
|
The simplest route found in the journal literature is as follows.
<font size="4">HDN</font>
A solution of 50 g. of the tetramine in 150 cc. of water was cooled to 0°, and to it nitric acid (d. 1.42) cooled to 0° was added gradually. The
nitrate was precipitated immediately in the form of small, white crystals which were separated by filtering the solution through glass wool. They were
washed quickly with 50% ethyl alcohol previously cooled to 0°, and then given additional washings with alcohol and finally with ether. The mass was
then dried with warm air; average yield, 78.2 g.
<font size="4">DPT</font>
One-tenth mole of hexamine dinitrate was added proportionately with 0.92 mole of 90% aqueous sulphuric acid to a stirred flask at 8° to 15° C. over
a 30 min. period. After 45 min. subsequent stirring at 14° to 15° C , the mixture was poured into 400 cc. of ice and water. The solution was almost
clear, but was filtered and neutralized to pH 5.6 to 6.5 with 28% ammonia to yield 0.031 mole (31% of theory) of DPT, m.p. 199° to 201° C. This
yield was decreased to 23% when the addition time was 13 min., with seven minutes subsequent stirring.
The yield could be increased to 35% by adding the two ingredients proportionately to 0.2 mole of 98 to 99% nitric acid; but in this case a 14.5% yield
of impure Cyclonite (m.p. 188° to 198° C.) had to be filtered off before neutralization.
<font size="4">HMX</font>
When 2.18 gm. (0.01 mole) of DPT was added to 12.7 gm. (0.2 mole) of 99.6% nitric acid at 0° to 10° C. over five minutes, a slurry formed, After 25
min. this mixture, drowned in ice, yielded a precipitate melting at 232° to 260° C. This was heated with 70% nitric acid until nitrogen oxides were
evolved, then cooled, chilled-, and filtered. The washed, dried material weighed 1.01 gm. or 34% of theoretical and melted at 278.5° to 279.5° C.
Recrystallization from acetone, 70% nitric acid, dioxane (10% solution hot, 9% solution cold) or nitromethane, (solution 7.5% hot, 2.2% cold) raised
this to 280.0° C. (decomp.). These solubilities refer to crystallization over a few hours; the acetone solution precipitates more HMX over several
days.
LLNL handbook gives mp. for HMX as 285°C, and RDX 205°C.
[Edited on 3-4-2008 by Axt]
|
|
Nick F
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 439
Registered: 7-9-2002
Member Is Offline
Mood: No Mood
|
|
Cool, I don't think I've seen that one before.
But HMX is so last millenium .
|
|
Microtek
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 849
Registered: 23-9-2002
Member Is Offline
Mood: No Mood
|
|
I have used the Lukasavage patents with great results. I started out from DADN (the diacetyldinitro analog to HMX) which is prepared quantitatively
from hexamine and acetic anhydride (and other more easily accessible materials). The nitrolysis of DADN to SOLEX (the acetyltrinitro analog) and
subsequently to HMX gives essentially 100 % yield but requires P2O5 and anhydrous nitric acid.
I suppose that if you have access to Ac2O, you might as well use the conventional method giving something like 95% yield of 95% purity without the
hassle of P2O5. However, I wanted to start from a substrate that would reduce the likelyhood of any product being just RDX (I didn't have access to
any analytical methods that would reliably distinguish between RDX, HMX and any linear nitramines in the product).
|
|
hector2000
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 127
Registered: 22-8-2006
Member Is Offline
Mood: Cool
|
|
Mr Microtek Please say your Ratio and instruction of your reaction.
Before i made hmx using rogue science method but in the final product you will have Rdx and Hmx.and also you should use lot of anhydrid i dont advise
rogue method(bachmann)
Chemistry=Chem+ is+ Try
|
|
Engager
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 295
Registered: 8-1-2006
Location: Moscow, Russia
Member Is Offline
Mood: Lagrangian
|
|
I've successfully made HMX by method from US Patent №3926953, desctription of experiment and my notes and pictures are shown below:
7g (0.05 mol) of hexamine and 3.1g ammonium acetate (0.04 mol) are added to 3.6 ml of water (0.2 mol) cooled to 5-10°С. 15.3g (0.15 mol) of
acetic anhydride is added with stiring in period of 60 minutes. Resulted colerless solution of DAPT is stirred for 30 minutes and then slowly, with
stirring added drop by drop to mixture of 31.5g nitric acid (21 ml, 0.5 mol, density 1.495) and 110.5g sulphuric acid (60 ml, 1.13 mol, density
1.835) placed in ice bath in period of 120 minutes. Temperature is not allowed to rise above 15°С, solution is added by 6-7 drops at one time
and then thoroughly mixed before adding new portion of solution (Note #1). After addition is completed, mixture is removed from ice bath and allowed
to stand at room temperature for 2 hours. Mixture is poured on 0.5 kg of ice and 500 ml of water is added, resulting solution is thoroughly mixed and
allowed to stand overnight (Note #2). Precipitated solid is filtered off, washed with cold water and dried at dessicator with P2O5. Yield is 10.6g
(73%) of pure 1,5-diacetyloctahydro-3,7-dinitro-1,3,5,7-tetrazine (DADN).
Notes:
1. Patent literature mentiones possibility of violent exoterm, after aproximately 20 minutes from addition start, witch can cause heating to 85C.
Exoterm is result of oxidation of formaldehyde byproduct with nitric acid. In order to eliminate this exoterm addition time is increased to 120
minutes (from 80 original) and portions of added solution is reduced to level at witch oxidation is not have time to start before next stirring. If
added portions are larger, if stirring is not preformed propertly or if mixture have no time to cool before addition of new portion, violent exoterm
is started, followed by foaming and evolution of large ammounts of nitrogen oxides.
2. Netherless very low solubility of DADN in water, crystallization of product can not start imidately (supersaturation) and should be aided by
friction of glass rod on side wall of reaction wessel (below level of liquid). Crystallization is started after several hours and is completed in
about 12 hours.
Solution of N2O5 in nitric acid is prepared by adding 50g phosphorous pentoxide to 100 ml of nitric acid (2.38 mol, density 1.495 g/cm3). Temperature
is not allowed to rise above 30C, resulted solution is gently stirred and allowed to stand for 30 minutes at room temperature (Note #1). N2O5 solution
is heated to 30C, 6g of DADN is added and mixture is stirred until DADN is fully dissolved (~10 minutes). Reaction mixture is heated to 50C and kept
at this temperature for 1 hour (Note #2). After nitration is complete mixture is poured on to ice (300g) and 200 ml of cold water is added, poorly
soluble HMX precipitates from solution as white solid (Note #3). HMX precipitate is filtered, washed with small ammount of ice cold water, placed to
100 ml of 3% solution of NaHCO3
and allowed to sit for 1 hour. Washed HMX is filtered and dried in dessicator with P2O5. Yield is 5.82g (95%) of HMX with ~100% purity.
Notes:
1. Formation of N2O5 takes some time, after mentioned period clear yellow solution is formed. Addition of P2O5 to nitric acid generates large ammounts
of heat (especialy if acid contains water) and solution can heat to boiling, generating many nitrogen oxides, resulting from decomposition of N2O5 and
partial decomposition of HNO3. That's why keeping temperature below 30C is essential during adition, towards end of P2O5 additon heat evolution
ceases. It should be remembered that solution of N2O5 in anhydrous nitric acid is extemely corrosive and will cause severe burns and deep painfull
long healing ulceration if spilled on skin.
2. Cover of reaction vesel should not be screved tightly, process generates nitrogen oxides witch can blow reaction vesel. Process should be carried
out with effective ventilation or under the fume hood. Part of nitrogen pentoxide decomposes, generation NO2 and oxygen, however not affecting
reaction yield.
3. Then mixture is poured on ice, large ammount of heat and nitrogen oxides is generated. Nitrogen oxides are relatively badly soluble in cold water
and part of them escape, without ability to fully react with water. Resulted solution has sky blue color due the large concentration of HNO2 is
present (it is formed by reaction of NO2 with water). Solubility of HMX in water is very limited (0.003% at 20°С , however large ammounts of water should not be used because it will lead to some
losses of reaction product.
|
|
maxidastier
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 118
Registered: 3-4-2010
Member Is Offline
Mood: No Mood
|
|
I've just found another method, which seems damn interesting because it is so easy to prepare!
But I don't know if it will work.
Here it is:
http://www.pyrotube.com/read_blog/2/hmx-%28octogen%29-from-u...
Maybe this is an unusual synthesis. Every anrachy crap book you read around and terrorist handbooks have the usual "urea nitrate from piss". How about
"HMX from piss" ?!?!? this procedure may be so.... altough only a careful chemist may succed in these synthesis.
- First step: The first step is rather easy. It consist of preparation of urea nitrate by simply adding nitric acid in excess to a solution of urea.
Must be plain fertilizer grade urea and not a salt (urea sulphate). The nitrate ion bonds to urea at the OXYGEN ATOM !!! weird, isnt it ?? the
polarity of oxygen binding to the carbon causes it to have the negative charge that atracts NO3+. It doesnt in any way bonds to the ammonia part of
the urea. This is important to know because it will give a 1:1 nitrate to urea and not a dinitrate.
- Second step is the synthesis of nitrourea. It is important to create mono-nitrourea and not n,n-dinitrourea. Dinitrourea WONT WORK because
mono-nitrourea haves a NH complex that can still react. This is important for the next step. If you decide to do a nitrolysis on site of a mixture of
nitric and sulohuric acid and then adding the urea, you will gent dinitrourea, so its important to start from urea nitrate, and adding it to sulphuric
acid to generate mono-nitrourea. Nitrourea at this step is also a very good explosive, but chemicale unstable, meaning that altough insensitive, will
decompose quickly on time specially if moist. it must be dried quickly !!!!!!!
- The most difficult step is the third: synthesis of DPT. This is done by carefully mixing nitrourea with a concentrated (37%) formaldehyde solution.
If you mix plain urea with formaldehyde in a acid media, it will form a polymer beacuase it haves th both NH2 radicals free to join to the urea.
Mononitrourea only haves "one", so it will form a dimer of urea-formaldehyde. I dont know if it may form a cage structure at this time, but the
addition of 5% NaOH will produce the solution of DPT relasing CO2 and a "cyclooctane" cage-like structure, known as DPT. It is precipitated by simply
adding ammonia to the solution and filtering it off. More ammonia can be addedd to the solution to make sure all is filtered.
- Final step: An usual nytrolisis of DPT yields HMX. This is best done through nitrogen pentoxide, maded by mixing nitric acid and phosphorous
pentoxide. To make things easier for a home made pyro, high concentratoon nitric acid with ammonium nitrate may do. I dont suggest dehydratation with
sulphuric acid because it will hydrolize DPT !!! The stronger your nitric acid, the best it will do, but low concentration nitric acid may work if a
lot of ammonium nitrate is disolved first. Then an usual precipitation with water will yield a mixture of DPT and HMX, with a predominant of HMX
(about 70%) Sorry, i still dont know how to separate DPT from HMX, but DPT is a high explosive by itself so it will work also very good!!
Is this just nonsende or perfect?
I'd jsut have to now some more details, masses, volumes, etc.
EDIT: I've just found another PATENT! which claims to get cheap DPT from Nitrourea but they don't exactly know how it works, BUT IT WORKS!
I think, my next batch of HMX won't be far away and it will be BIG ![:D](./images/smilies/biggrin.gif)
Just going to use my CHEAP Urea fertzilizer and my CHEAP 53% HNO3 to make some UREA NITRATE and then make some CHEAP NITROUREA with cheap H2SO4 and
then add some CHEAP Formaldehyd solution and some Cheap sodium hydroxide and some cheap ammonia solution and get some CHEAP DTP and make some HMX with
100% HNO3 and AN (or I may build an ozon generator to make some nice Nitrogenpentoxide.
Yes, I'm crazy and I'm sure there is somewhere another thread about it and you already discussed this stuff, but I could'nt find it by using the
search engine, so I thought: Be so kind and post some very interesting and helpful.
[Edited on 17-8-2010 by maxidastier]
|
|
Peroxid
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 56
Registered: 23-8-2006
Member Is Offline
Mood: No Mood
|
|
Anybody tried the method (HDN-->DPT) that posted by Axt? On this weekend i will try it, and if somebody interested in i will post the results.
--------
Today i tried to synth. DPT from HDN. I added the HDN to the sulfuric acid at 12-13° C and got a white dense mixture. I stirred it for 40-45min,
after i poured it to ice and neutralized it with NH3 solution to pH 6.5 (when i neutralized the mixture, the temperature was 15-20° C), but i didn't
get a precipitate. :/
Anyway i found a US patent about this synth and i read this: "HDN may be converted to DPT by treatment with sulfuric acid... " So may
be not ![:D](./images/smilies/biggrin.gif)
[Edited on 27-8-2010 by Peroxid]
|
|
maxidastier
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 118
Registered: 3-4-2010
Member Is Offline
Mood: No Mood
|
|
Anyone tried or knew the method I mentioned.
Is it cheaper/easier than HDN-->DPT) route?
|
|
Peroxid
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 56
Registered: 23-8-2006
Member Is Offline
Mood: No Mood
|
|
I found this patent about this method...maybe i will try it.
http://www.freepatentsonline.com/4338442.pdf
The yield that is discribed by this patent (52%) is better than hexamine + acetic anhydride + cc.HNO3 route(48% - I done this procedure and i got
44-45% yield. ) - W. E. BACHMANWN,. J. HORTONE, . L. JENNER, N. W. MACNAUGHTAONND L. B. SCOTT, J. Org. Chem., vol73,p.:2769-2773,(1951).
[Edited on 27-8-2010 by Peroxid]
|
|
maxidastier
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 118
Registered: 3-4-2010
Member Is Offline
Mood: No Mood
|
|
Yeah, that's the patent...
But I won't be able to get formaldeyhde solution of that STRENGTH! Only 20%..
|
|
Anders2
Banned
Posts: 39
Registered: 4-9-2010
Member Is Offline
Mood: No Mood
|
|
An alternative is just to condense MEDINA with CH2O, guaranteeing absolutely no RDX will contaminate your product.
|
|
maxidastier
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 118
Registered: 3-4-2010
Member Is Offline
Mood: No Mood
|
|
http://www.e-journals.in/PDF/V8N1/97-100.pdf
What about that? May be hard to get that "ionic liquid", especially because it described very detailed.
But maybe someone knows something
|
|
VladimirLem
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 204
Registered: 24-5-2010
Member Is Offline
Mood: Have no fear <Vlad> is here.
|
|
pretty cool synth.
anyone already testet it?
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
Some notes about separating RDX from HMX,
The solubility of RDX in water at room temperature is 45.9 mg/L.
The solubility of HMX in water is 3.49 mg/L.
By dissolving a mixture of RDX and HMX is another solvent that these compounds are both more soluble in, and then adding a quantity of water, in
specific proportions, it is possible to selectively precipitate out the RDX.
For example, with 2 grams of crude RDX (which contained 8.6 percent HMX content) dissolved in 50 mL acetonitrile, if 25mL of water were added a
precipitate of pure RDX could be separated out, giving 42.4 percent yield. Whereas if 50mL of water were added, the purity of the RDX in the
precipitate was 99.2 percent, with a higher yield of 72.7 percent.
"Preparation Of Insensitive Rdx From Crude Rdx Using An Antisolvent. Phase Separation Process", Veera Boddu, Abburi Krishnaiah
[Edited on 5-3-2012 by AndersHoveland]
|
|
caterpillar
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 472
Registered: 8-1-2012
Member Is Offline
Mood: No Mood
|
|
I've found couple of words about HMX. Treatment of DTP (1 mole) by 3.2 mole of HNO3 + 1.6 mole of NH4NO3 at 60-65 C. I rather doubt about it- at the
end of reaction HNO3 will be diluted. But who knows... Nice method of preparation of DPT has been evolved by an amateur- read my article at this
forum.
Women are more perilous sometimes, than any hi explosive.
|
|
AndersHoveland
Hazard to Other Members, due to repeated speculation and posting of untested highly dangerous procedures!
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1986
Registered: 2-3-2011
Member Is Offline
Mood: No Mood
|
|
I heard somewhere that using urea and CH2O to form di-keto HMX can use concentrated H2SO4 (and NaNO3) in the synthesis with acceptable yields. Of
course, normal mixed acids do not work when making normal HMX, or RDX.
[Edited on 9-3-2012 by AndersHoveland]
|
|
simply RED
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 209
Registered: 18-8-2005
Location: noitacoL
Member Is Offline
Mood: booM
|
|
After the 1000 posts AndersHoveland should be "Giver of the worst advice" ...
When logic and proportion have fallen sloppy dead...
|
|
caterpillar
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 472
Registered: 8-1-2012
Member Is Offline
Mood: No Mood
|
|
Why so? I do not remember something really stupid in articles, written by Anders Hoveland. Or you lost finger or eye following his tips?
Women are more perilous sometimes, than any hi explosive.
|
|
simply RED
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 209
Registered: 18-8-2005
Location: noitacoL
Member Is Offline
Mood: booM
|
|
"I heard somewhere that using urea and CH2O to form di-keto HMX can use concentrated H2SO4 (and NaNO3) in the synthesis with acceptable yields. Of
course, normal mixed acids do not work when making normal HMX, or RDX."
Isn't this enough?
When logic and proportion have fallen sloppy dead...
|
|
caterpillar
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 472
Registered: 8-1-2012
Member Is Offline
Mood: No Mood
|
|
Well, it is not obviously the best ant clearest explanation. But it is only a tip- look in a literature for some additional info. It is not the
detailed manual how to prepare keto-HMX (BTW, what is it? I've never heard about such compound, only about keto-RDX). I think, that really bad advice
is to make silver fulminate- it is well-known benchmark of very sensitive explosives.
Women are more perilous sometimes, than any hi explosive.
|
|
Pages:
1
2 |