| Pages:
1
2 |
chemkid
Hazard to Others
Posts: 269
Registered: 5-4-2007
Location: Suburban Hell
Member Is Offline
Mood: polarized
|
|
Sodium Ferrocyanide
I think i found an OTC source for sodium ferrocyanide. Yellow prussiate of soda is the traditional name for sodium ferrocyanide. Kosher salt contains
sodium ferrocyanide and salt (NaCl) and costs about a 1.50 a box (which is rather large). By dissolving this in denatured ethanol (or if you've got
the money straight ethanol) i would think that the insoluble sodium ferrocyanide would precipitate and NaCl dissolve.
This is only speculation so far. I will try it in the morning.
I know sodium ferrocyanide can be used as an iron indicator. How exactly would such a test be performed?
Chemkid
[Edited on 30-12-2007 by chemkid]
|
|
|
pantone159
National Hazard
Posts: 590
Registered: 27-6-2006
Location: Austin, TX, USA
Member Is Online
Mood: desperate for shade
|
|
I'd be kind of surprised if there was enough ferrocyanide to make it worth the trouble, but hey, give it a shot.
If you mix a solution of ferrocyanide with a solution of ferric Fe(III) ion, you get a very vivid, dark blue precipitate, "Prussian Blue". Although
this is a solid, it often forms very fine particles that stay suspended in the liquid, and pass through filter paper.
|
|
|
garage chemist
chemical wizard
Posts: 1803
Registered: 16-8-2004
Location: Germany
Member Is Offline
Mood: No Mood
|
|
Since when does NaCl dissolve in ethanol? You obviously havent tried that out, because it doesnt work.
Also, the amount of ferrocyanide in salt is really very small.
Add some iron(III)salt solution to a solution of some of your salt in water, and if it doesnt instantly become nearly black with prussian blue then
there is no concentration worth extracting in there. The prussian blue reaction is very sensitive.
On the other hand, making prussian blue is a good way to precipitate ferrocyanide ions from solution. If there was a worthwhile aount of ferrocyanide
in any product, then precipitation as prussian blue would be the way to extract it.
I think trying to get ferrocyanide from salt is a really dumb idea. Some OTC "sources" of chemicals are damn stupid because of low concentration
and/or simply ridiculous, like getting red P from matchbook strikers.
|
|
|
evil_lurker
National Hazard
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
The problem is the ferrocyanide is added like .01% as an anti caking agent... its pretty much worthless as a source as there is very little to
extract.
Not all chemicals are bad. Without chemicals such as hydrogen and oxygen, for example, there would be no way to make water, a vital ingredient in
beer.
|
|
|
not_important
International Hazard
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Besides that, not all Kosher salt has sodium ferrocyanide added:
http://www.copia.org/content/node/231
|
|
|
pantone159
National Hazard
Posts: 590
Registered: 27-6-2006
Location: Austin, TX, USA
Member Is Online
Mood: desperate for shade
|
|
'Normal' table salt probably has as much ferrocyanide as any other kind. IIRC, this is where the Morton's salt slogan 'If it rains, it pours' comes
from: Even if it is very humid, the salt doesn't clump up, due to the anti-caking effect of ferrocyanide.
I once read somewhere that Kosher salt was more pure than regular salt, maybe this is the lack of iodide though.
|
|
|
not_important
International Hazard
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Not all table salt uses ferrocyanide, various silicates and magnesium carbonate are common too. Drop some salt into enough water to dissolve it, if
there is a milkiness then it's likely a silicate anticaking agent was used.
|
|
|
chemkid
Hazard to Others
Posts: 269
Registered: 5-4-2007
Location: Suburban Hell
Member Is Offline
Mood: polarized
|
|
I tried it out this morning, and obviously it didn't work, because NaCl is very sparingly soluble in ethanol (stupid Internet). But from the
affordability of the salt, it wouldn't be that ridiculous to do and if you have a distillation setup you can recover the solvent you use. I used
Morton kosher salt because it was uniodized, and had only salt (and impurities of the salt) and sodium ferrocyanide. Just because somethings is there
in low concentrations doesn't make its extraction pointless. Try Marie curie and radium, well i guess were not discovering anything new, but so what.
Chemkid
PS I thought extracting red phosphorus from match boxes sounded like great fun.
[Edited on 31-12-2007 by chemkid]
[Edited on 31-12-2007 by chemkid]
[Edited on 31-12-2007 by chemkid]
|
|
|
evil_lurker
National Hazard
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
| Quote: | Originally posted by chemkid
I tried it out this morning, and obviously it didn't work, because NaCl is very sparingly soluble in ethanol (stupid Internet). But from the
affordability of the salt, it wouldn't be that ridiculous to do and if you have a distillation setup you can recover the solvent you use. I used
Morton kosher salt because it was uniodized, and had only salt (and impurities of the salt) and sodium ferrocyanide. Just because somethings is there
in low concentrations doesn't make its extraction pointless. Try Marie curie and radium, well i guess were not discovering anything new, but so what.
Chemkid
PS I thought extracting red phosphorus from match boxes sounded like great fun.
|
Well you can't exactly go buy radium for $30 (or less) a pound either, can you?
Not all chemicals are bad. Without chemicals such as hydrogen and oxygen, for example, there would be no way to make water, a vital ingredient in
beer.
|
|
|
MagicJigPipe
International Hazard
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
Red P from matchbook strikers is only viable if (a) you are a tweaker and can stay up for a week scraping them or dissolving in acetone (works better
but wastes acetone and recycling is even more time consuming) (b) if you only need small, impure quantities, like a couple of grams.
I have done it before and it is, most certainly, not fun. I think I got like .2g per box (just an estimate, it was a long time ago) which includes
all impurities such as silica.
Also, I use Kosher salt for some reactions/washings because it claims to contain only salt and no iodides. It dissolves clear. I hope it doesn't
contain ferrocyanides.
[Edited on 1-1-2008 by MagicJigPipe]
[Edited on 1-1-2008 by MagicJigPipe]
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
|
chemkid
Hazard to Others
Posts: 269
Registered: 5-4-2007
Location: Suburban Hell
Member Is Offline
Mood: polarized
|
|
as states before, it depends on you brand.
I was really looking to purify the salt from the sodium ferrocyanide when i thought i discovered a means for removing it. So far i am yet to find a
solvent in which NaCl is soluble and Na ferrocyanide is not or vise versa.
Chemkid
|
|
|
garage chemist
chemical wizard
Posts: 1803
Registered: 16-8-2004
Location: Germany
Member Is Offline
Mood: No Mood
|
|
You can purify NaCl from almost any contaminants by dissolving in water, filtering until you have a clear solution, and gassing with HCl.
The solubility of NaCl decreases strongly with increasing HCl concentration, and the purified salt precipitates. This removes sodium ferrocyanide
completely.
This process is used in industry to prepare high-purity NaCl for various uses.
[Edited on 1-1-2008 by garage chemist]
|
|
|
Tinton
Harmless
Posts: 15
Registered: 16-12-2007
Member Is Offline
Mood: homework laden
|
|
Perhaps if you mixed an acid strong enought to create HCN, but not strong enought to create HCL, to the ferrocyanide, the cyanide ion could be
liberated from kosher salt.
And then bubbled through NaOH for NaCN...
[Edited on 3-1-2008 by Tinton]
|
|
|
chemkid
Hazard to Others
Posts: 269
Registered: 5-4-2007
Location: Suburban Hell
Member Is Offline
Mood: polarized
|
|
I e-mailed the company and found out what everyone already pointed out .0013 concentration of pottasium ferrocyanide. Should be pure enough for me.
Thats morton kosher salt for all who want to know.
@tinton Not so eager to work with hydrogen cyanide 
|
|
|
Xenoid
National Hazard
Posts: 775
Registered: 14-6-2007
Location: Springs Junction, New Zealand
Member Is Offline
Mood: Comfortably Numb
|
|
@ chemkid
If you are so desperate for sodium ferrocyanide you are prepared to extract it from salt, why don't you try the "old fashioned way".
""When nitrogenous refuse (blood, horns, leather scraps, etc.) is charred, and the black mass is ignited with potash and iron filings, something is
formed which passes into solution when the mass is lixivated with water. The aqueous solution, on evaporation gives yellow crystals of potassium
ferrocyanide (K4Fe(CN)6.3H2O).""
""...prepared it by melting dried blood with potash salts and treating the aqueous extract of the mass with ferrous sulphate.""
""...animal flesh... and other animal substances could be used instead of blood.""
To make Na ferrocyanide, use sodium carbonate instead of potash, though Na ferrocyanide is less soluble than K ferrocyanide!
I've always wanted to try this but I've never had the guts (literally)...
Could be a bit smelly, if your'e in an urban area!
This could be a fitting end for the family "moggy" if he/she/it gets hit by a car; converted into yellow sodium ferrocyanide crystals and put in a jar
on a shelf!
If you require more, find a dead cow or a friendly butcher!
[Edited on 3-1-2008 by Xenoid]
|
|
|
evil_lurker
National Hazard
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
www.chemsavers.com has potassium ferrocyanide on sale, 2 Kgs for $25, shipped ORM-D.
Not all chemicals are bad. Without chemicals such as hydrogen and oxygen, for example, there would be no way to make water, a vital ingredient in
beer.
|
|
|
len1
National Hazard
Posts: 595
Registered: 1-3-2007
Member Is Offline
Mood: NZ 1 (goal) - Italy 1 (dive)
|
|
| Quote: | Originally posted by garage chemist
You can purify NaCl from almost any contaminants by dissolving in water, filtering until you have a clear solution, and gassing with HCl.
The solubility of NaCl decreases strongly with increasing HCl concentration, and the purified salt precipitates. This removes sodium ferrocyanide
completely.
This process is used in industry to prepare high-purity NaCl for various uses. |
145 gms NaCl were dissolved in 500ml H2O giving a 5mol/L solution (about saturation). To half of this 80ml of 32% w/vol HCl was added giving a 10%
w/vol HCl solution.
No NaCl precipitated out. Any stronger acid and you should start liberating cyanide.
|
|
|
garage chemist
chemical wizard
Posts: 1803
Registered: 16-8-2004
Location: Germany
Member Is Offline
Mood: No Mood
|
|
I said *gasssing* with HCl, not adding hydrochloric acid. Adding hydrochloric acid introduces water as well.
However, you can do without the gassing if you slowly add the NaCl solution to the HCl and not the other way round.
Also, you need more HCl in proportion to the NaCl solution- try using equal volumes of HCl and NaCl solutions, or 2/1 HCl/NaCl by volume.
|
|
|
len1
National Hazard
Posts: 595
Registered: 1-3-2007
Member Is Offline
Mood: NZ 1 (goal) - Italy 1 (dive)
|
|
Yes I noticed the gassing - that means you want to achieve soubilities of the order of saturation of HCl - that will precipitate out some NaCl.
But thats just the common-garden common ion effect. Theres nothing special about HCl and NaCl and the effect is rather weak, its certainly no way to
eliminate NaCl from solution. Just a way to precipitate out a small amount of chloride salt.
PS If theres ferrocyanide in solution the extremely high H+ concentration will be hazardous.
When dealing with concentrations of 1mol/L or above one should really use activity coefficients - thermodynamics becomes non-linear since the ions no
longer form a dilute gas. However the effects can be demostrated in the linear approximation.
The solubility of NaCl at 30C is 6mol/L. Therefore
[Na][Cl]=36(mol/l)^2 is its solubility product - the excess precipitates.
The maximum strength of HCl which can be dissolved in solution is 10 mol/L (though in saline solutions it is less - NaCl has the same effect on it).
x(x+10) = 36 is the amount of NaCl which will dissolve in 37% HCl, we get x ~ 3 mol/L predicting this method will precipitate about half the NaCl in
solution.
I did a preliminary investigation and it precipitates a bit more than this due to non-linear effects.
Lets repeat that with the experiment I did above. Equal volumes of 6mol/L NaCl and 10mol/L HCl solution are mixed.
The sodium concetration now is ~ 3 mol/L since the volume ~ doubles
The chlorine concentration now is ~ (10+6)/2 = 8 mol/L, where division by 2 since volume ~ doubled
The solubility product is 8*3 = 24 (mol/L)^2
so nothing precipitates as I observed.
This can be repeated with Na2SO4 and H2SO4 etc..
[Edited on 4-1-2008 by len1]
|
|
|
woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I think there is more to this, when the HCl is highly concentrated. In 15% HCl quite some table salt can be dissolved, but in 37% HCl it is virtually
insoluble. Try it yourself. If you want to heat the solution, then keep it in a closed (pressure withstanding) vessel, otherwise you'll drive off much
HCl and then the experiment is not honest anymore.
I think that this has to do with the effect of non-ionized HCl in solution, which makes the solution less suitable for purely ionic compounds. This,
combined with the already high concentration of chloride probably results in low solubility of NaCl.
A similar effect exists for water, to which some ethanol or propanol is added. The solubility of NaCl rapidly drops with increasing concentration of
the alcohol.
|
|
|
len1
National Hazard
Posts: 595
Registered: 1-3-2007
Member Is Offline
Mood: NZ 1 (goal) - Italy 1 (dive)
|
|
Yeah OK, although I dont know why you mention heating - the solubility of NaCl hardly varies with T and for HCl it decreases.
I think that rather than trying to dissolve salt in 37% HCl equilibrium is more quickly reached by adding a small amount of solution of known
concentration to a much larger volume of HCl solution, filtering and weighing. (There is no reason for using HCl gas to test this that I can see).
I have done a preliminary test (without using the analytical ballance) and it seems 1/4 salt remained in solution, where my simple theory predicted
1/2.
However if your hypothesis about the change in the ionic nature of high concentration hydrochloric acid is correct, then this is not the common ion
effect, and the results should apply to HCl and any other ionic salt. i.e. adding a small amount of saturated solution of any salt to 37% HCl will
precipitate that salt. Len
[Edited on 4-1-2008 by len1]
|
|
|
woelen
Super Administrator
Posts: 8027
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Your last remark is not correct. Indeed, a precipitate can be formed, but this usually is the metal chloride. E.g. when you add NaBr to concentrated
HCl, then it also dissolves with difficulty, but most likely because it becomes covered with a crust of NaCl. If you drip in highly concentrated NaBr
solution in concentrated HCl, then you get NaCl as solid precipitate.
The same effect is present with KCl and KBr. Both dissolve with great difficulty in concentrated HCl.
Not all metal salts suffer from low solubility in conc. HCl, or in solutions with ethanol or acetone. Some salts dissolve well in less-polar solvents
also. An example is CuCl2.2H2O. This dissolves in acetone very well, also in ethanol, and in conc. HCl.
Yet another reason, why things may turn out different is complex formation. If copper sulfate is added to concentrated HCl, then it quickly dissolves,
giving H2SO4 and a copper complex anion, CuCl4(2-).
Summarizing, there are many different effects, which may have opposite effects on solubility. What the net outcome will be remains a matter of
experimentation.
|
|
|
len1
National Hazard
Posts: 595
Registered: 1-3-2007
Member Is Offline
Mood: NZ 1 (goal) - Italy 1 (dive)
|
|
If you are correct regarding the changed nature of the HCl solution then the key test is that a precipitate, on adding a saturated solution of another
salt (obviously excluding coordination compounds) will form. You are not correct to say the salt will definitely be a chloride - it depends on the
relative solubilities of the chloride vs whatever other ion you have introduced in product with the relevant concentrations. That is not however what
we are interested in here - which is to differentiate what you have mentioned from the common ion effect. Len
|
|
|
chemkid
Hazard to Others
Posts: 269
Registered: 5-4-2007
Location: Suburban Hell
Member Is Offline
Mood: polarized
|
|
That last post was dismissing any attempt at extracting the ferrocyanide. That's pure enough for me referred to the salt Just in case there was any misunderstanding there. I'm not crazy or desperate enough
to extract such an extremely low concentration.
the idea using animal parts does sound interesting.
Chemkid
|
|
|
len1
National Hazard
Posts: 595
Registered: 1-3-2007
Member Is Offline
Mood: NZ 1 (goal) - Italy 1 (dive)
|
|
A saturated solution of NaCl in 30C H2O was formed by dissolving 35gms NaCl in 100mls. 5mls of this solution were added to 55ml of 34% HCl (giving a
final HCl concentration of 31%). A precipitate of NaCl formed immediately, the solution was shaken and allowed to stand. It was subsequently rapidly
filtered (to allay the possibility of HCl evaporating during filtration) the filter paper was removed, soaked in conc HCl to remove any adhering
precipitate and liquids combined. The solution was evaporated and yielded 1.2 gms of NaCl.
This forms 1.2/1.75 ~ 68% of salt in solution precipitated. This compares with 0.5 from the linear analysis from my two posts above, which is
reasonably good agreement.
A conc. solution of KNO3 added to conc HCl in the same way produced no precipitate.
This seems to demonstrate
1) What we are looking at here is the common ion effect
2) Theres nothing special about HCl solutions - in particular the polarity of the solution does not alter at high HCl concentrations
3) The effect is good at precipitating high percentages 60-80% of relatively pure chlorides out of solution - other salts do not precipitate
[Edited on 6-1-2008 by len1]
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
