Pages:
1
2 |
MagicJigPipe
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
Pottery Chemicals
Today I purchased various pottery chemicals from an extremely elderly lady who was selling all of her pottery stuff. I was wondering if I got a good
deal (not like it matters, I only spent $4) and what are the most common uses for these in the lab. I already know about Mn02 but not everything
about it. Anyway, here goes.
Lithium Carbonate - 1/4lb (isn't this a mood stabilizer drug?)
Barium Carbonate - 1/2lb
Chromium Oxide - 1/4lb (I think (III) but mine is green and isn't (III) black?)
Manganese Dioxide - 1/2lb
Cobalt Oxide - 3oz (this is what she called it. It's black.)
Grand total: $4USD.
And for those of you who aren't in the US I just say 1/4lb = ~250g and 4oz = 1/4lb. That's close enough for some purposes.
**Edit**
I was thinking o quarter kg... thanks for the corretion... and the chemicals were sold to me in those measurements which is why I used them. It's
hard to not use the system since I spent ~20 years of my life learning and using them.
[Edited on 9-12-2007 by MagicJigPipe]
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
Xenoid
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 775
Registered: 14-6-2007
Location: Springs Junction, New Zealand
Member Is Offline
Mood: Comfortably Numb
|
|
Err... 1/4lb is closer to 125g it's 2.2lb to the Kg
God - when will you Americans stop using all those loopy, old fashioned measurements!
Yes, you got a good deal! The Li, Ba, and Co are normally the most expensive!
[Edited on 9-12-2007 by Xenoid]
|
|
not_important
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Cr2O3 - green, dark green trending towards black if prepared in certain ways. Fairly inert stuff.
Li2CO3 may have a percent or two of Na, K, and/or Mg in it. Does no harm in pottery applications.
The cobalt is a mixed oxide, some Co(II) and some Co(III); if you dissolve a bit in string hydrochloric acid some chlorine will be generated. Most
simple Co(III) salts are not stable in aqueous solution, gently boiling the chloride solution will result in just CoCl2.
Good prices for getting some fooling around supplies, starting point for other Li, Ba, Co salts; Mn ones too plus its use as an oxidiser.
|
|
MagicJigPipe
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
Yes, I figured I could get CoCl2 from the oxide. I just didn't know of the purity of "pottery grade". And I was thinking of 1/4 kg when I wrote the
250g thing. My mistake.
The following is way off topic.... sorry.
Also, I was watching a show on MTV about this girl from the US who moved to New Zealand and a lot of the people at her school were extremely rude and
ignorant. They made fun of her for being from the US and were just plain mean. Especially one of her teachers.
What's up with that? Surely not everyone in New Zealand is like that. We NEVER made fun of foreigners at my school. We treated them like everyone
else most of the time. Unless they were dicks. Actually, one of my best friends moved here from England 4 years ago. I never treated him like he
was inferior because he was from the UK and we make fun of eachother's "cultural differences" only in jest.
Oh, another HILARIOUS thing was when the teacher asked the students what they thought of when they they think of the US they said, "Laguna beach" and
"California beaches". Oh my god! My country is being represented by THOSE idiots!
[Edited on 10-12-2007 by MagicJigPipe]
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
Xenoid
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 775
Registered: 14-6-2007
Location: Springs Junction, New Zealand
Member Is Offline
Mood: Comfortably Numb
|
|
Quote: | Originally posted by Xenoid
God - when will you Americans stop using all those loopy, old fashioned measurements!
[Edited on 9-12-2007 by Xenoid] |
Yeah! Sorry, but I just couldn't resist it ![:P](./images/smilies/tongue.gif)
It really annoys me actually. When I go into a hardware shop here in NZ looking for metric nuts, screws, etc. they have very little range, it's all
3/8" this and 5/32" that!
When I complain, they say it's because the American market is so big, they can get the stuff with loopy measurements, cheaper than metric - go figure!
I personally find all Americans I have met to be extremely nice and pleasant, unfortunately because of your politician's antics and war mongering over
the last few years, I think your country has gone downhill in the world's esteem.
Actually, I have a running joke with my son. Whenever we see anything break or crash it's out with "Made in the USA"
|
|
MagicJigPipe
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
Really? We do the same thing here except it's "made in New Zealand". Just kidding. Really it's China or Taiwan.
You know what? The old lady was so senile and was taking so long that in my haste to get out of there I forgot to buy her "vanadium yellow" (V2O5).
Hopefully she hasn't sold it yet. I'll probably be able to get a pound of it for $5.
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
Xenoid
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 775
Registered: 14-6-2007
Location: Springs Junction, New Zealand
Member Is Offline
Mood: Comfortably Numb
|
|
1.1 Kg for $5, now that's good value....![:o](./images/smilies/shocked.gif)
The local pottery place here sells 500g for about NZ$50...![:o](./images/smilies/shocked.gif)
Edit: Changed price, looked it up wrongly in catalogue! Still expensive though!
[Edited on 9-12-2007 by Xenoid]
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
The black Co3O4 is very inert. I also have that material and I hardly could dissolve this. I tried concentrated hot HCl, concentrated hot H2SO4 and
the same, with reductors like Na2SO3 added. No success. Only after an hour of refluxing or so in very hot H2SO4 (30%) with some Na2SO3 added, I
obtained a very faint pink color, almost invisible. I turned away from using that oxide, in the meantime I also found cobaltous sulfate and cobaltous
chloride.
|
|
12AX7
Post Harlot
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
The chrome oxide is definetly extremely green, and definetly on the inert side. You're better off fusing it with an oxidizer (see chromate thread) to
get it into solution, then if you want Cr(III) again, reduce it to a salt or reactive Cr(OH)3.
Tim
|
|
len1
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 595
Registered: 1-3-2007
Member Is Offline
Mood: NZ 1 (goal) - Italy 1 (dive)
|
|
Quote: | Originally posted by MagicJigPipe
The following is way off topic.... sorry.
Also, I was watching a show on MTV about this girl from the US who moved to New Zealand and a lot of the people at her school were extremely rude and
ignorant. They made fun of her for being from the US and were just plain mean. Especially one of her teachers.
What's up with that? Surely not everyone in New Zealand is like that. We NEVER made fun of foreigners at my school. We treated them like everyone
else most of the time. Unless they were dicks. Actually, one of my best friends moved here from England 4 years ago. I never treated him like he
was inferior because he was from the UK and we make fun of eachother's "cultural differences" only in jest.
|
You never made fun of foreigners at your school, we never had any foreigners at our school to make fun of. The most exotic was one Australian to a
school of 1000+. And yes he was taken the micky out of, but not seriously. That was 20 yrs ago, maybe there are more foreigners in NZ schools these
days. Its a great place to live, a darn awful place if you want to do science in. We lived in the second biggest city and there was one place were
you could buy analytical chemicals over the counter (in NZ even HCl was not stocked in hardware) and two were you could purchase transistors, all at
exhorbitant prices (NZ was all about middlemen). I remember walking two hours there and back to the industrial zone (there was no public transport)
to be told that I need a note with my parents permission to buy a chemical. So it all had to be repeated the next day. At the electronics shop they
refused to give me a price list, lest I should see their trade prices. Kids have to pay full price.
|
|
chloric1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1090
Registered: 8-10-2003
Location: GroupVII of the periodic table
Member Is Offline
Mood: Stoichiometrically Balanced
|
|
Quote: | Originally posted by Xenoid
Err... 1/4lb is closer to 125g it's 2.2lb to the Kg
God - when will you Americans stop using all those loopy, old fashioned measurements!
[Edited on 9-12-2007 by Xenoid] |
When American business and government stops using them! I get so exhausted converting fahrenheit to celsius, square decimeters to square inches,
grams to ounces etc etc. I am technically progessive enough to accept America going TOTALLY metric, unfortunately too many prom queens and football
heads are NOT ready for this.
Fellow molecular manipulator
|
|
12AX7
Post Harlot
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
By admitting you cannot handle imperial measurements, you are conceding you have no capacity for fundamental arithmetic, approximating values and
remembering simple numbers.
I pity you.
Tim, sometimes works in electronvolts. OMG, it's so non-SI!!!!!!1
|
|
Xenoid
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 775
Registered: 14-6-2007
Location: Springs Junction, New Zealand
Member Is Offline
Mood: Comfortably Numb
|
|
Quote: | Originally posted by 12AX7
By admitting you cannot handle imperial measurements, you are conceding you have no capacity for fundamental arithmetic, approximating values and
remembering simple numbers.
|
This is a rather silly statement, I'll leave it at that!
When US Mars missions, miss their mark, because some twat forgot to convert miles to Km or some such, don't you think it's a serious problem.
This thread is going to get canned fairly soon!...
|
|
MagicJigPipe
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
Quote: |
This thread is going to get canned fairly soon!...
|
Why?
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
not_important
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Quote: | Originally posted by MagicJigPipe
... I forgot to buy her "vanadium yellow" (V2O5). Hopefully she hasn't sold it yet. I'll probably be able to get a pound of it for $5.
|
Make sure that it is really V2O5 and not a vanadium based pigment. Example
http://store.ceramicstoreinc.com/vanadiumyellow.html
http://pangea-intl.com/glaze/ceramic-stain-PANGEA-INTERNATIO...
There's still vanadium in it, but not as much as if it were V2O5 and you'll have to work to extract the vanadium.
|
|
MagicJigPipe
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
Ooooh... Yeah, didn't think of that. I just remember seeing , on another site, what they said was V2O5. It didn't say "vanadium yellow". I suppose
they are two different things.
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
12AX7
Post Harlot
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Innit lead metavanadate?
Tim (I've never metavanadate I didn't like)
|
|
not_important
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Quote: | Originally posted by 12AX7
Innit lead metavanadate?
|
No, lead is pretty much verboten in pottery these days. Tin or zirconium base is common. Zirc is used a lot, the mixed alkoxides are sprayed either
mixing with water spray or into steam, the ZrO2 formed protects the colour formers from dissolution in glazes.
|
|
MagicJigPipe
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
Most sites list vanadium yellow as Sn and V. Which compounds of the two I don't know. But the only V compound I know of that is yellow is V2O5.
Maybe it's a mixture of V2O5 and Sn.
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
MadHatter
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1333
Registered: 9-7-2004
Location: Maine
Member Is Offline
Mood: Enjoying retirement
|
|
Uranium
It was used in pottery glazes in the 70s because of the extremely black color it
produced. The EPA and the NRC would lose their collective minds if a pottery supplier
tried to sell it now. Still my pottery supplier is a good source of OTC chemicals.
From opening of NCIS New Orleans - It goes a BOOM ! BOOM ! BOOM ! MUHAHAHAHAHAHAHA !
|
|
not_important
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Not just blacks, but more famously for light greens, yellows, and orange glazes, before and after WW-II.
http://people.umass.edu/emartz/martzpots/gallery/uranium.htm
http://www.orau.org/PTP/collection/consumer%20products/urani...
|
|
microcosmicus
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 287
Registered: 31-12-2007
Member Is Offline
Mood: spin up
|
|
Quote: | Originally posted by MagicJigPipe
Today I purchased various pottery chemicals from an extremely elderly lady who
was selling all of her pottery stuff. I was wondering if I got a good deal
(not like it matters, I only spent $4) and what are the most common uses for
these in the lab.
[Edited on 9-12-2007 by MagicJigPipe] |
Having come back from a run to the friendly local pottery shop for some
of the same chemicals you bought (BaCO3 and MnO2), I can answer your
question. You were at the right place at the right time and got an
awesome deal!!!! While manganese dioxide and barium carbonate are
relatively cheap, the other three chemicals are not definitely not. In fact,
ordinarily your $4 would only buy you one of them in the quantities you
obtained so you got something like a "three for the price of one liquidation
sale" discount with two cheap chemicals thrown into the bargain.
Speaking of my trip, every time I go to the pottery store, I feel like the
proverbial kid in the candy shop and it is extremely difficult to restrain
myself from grabbing everything in sight Nothing like walking down an
aisle of shelves packed with all sorts of goodies from the usual compounds
of silicon, aluminum and copper to the exotic, like praesodymium and
vanadium oxides, not to mention the refractories and knick-knacks like
nichrome wire and rod or drills for glass and ceramic. In addition, my
local pottery shop has a once-a-month event where there is some sort
of ceramic demonstration or workshop coupled with discounts on
refractories, books, and other items (but no discount on chemicals ).
At one of these sales, I picked up an interesting book called "Ceramic
Science for the Potter" by W. G. Lawrence and R. R. West, which describes
the physics and chemistry of clay and glass and relates it to the practical
issues of making stuff out these materials. One of these years, I hope
to build some of the apparatus described therein, such as a thermal
gradient furnace or a differential thermocouple and carry out some of the
measurements described in the book for various ceramic compositions.
Also, reading their account of slip pouring and casting suggests some
interesting problems in mathematical physics involving Pfaffian systems
and fractional calculus which I will also have to look into. On a somewhat
different note, when I build up some skills in the arts of melting and
sintering and build myself some better equipment, it might be fun to try
making some ferrites, rare-earth magnets (got to something with that
praesodymium, you know), and other ceramic materials. Right now, I am
at the level of slip-casting mullite and alumina crucibles and am fiddling
around with carbon-clay mixtures.
As for use of common uses of the chemicals you purchased, I can think of
two uses for barium. Firstly, it is often used to precipitate sulphate and
other anions. For instance, the old book "Qualitative Analysis as a Laboratory
Basis for the Study of General Inorganic Chemistry" by W. C. Morgan, which
is freely availlable online, gives a neat little procedure for determining
which anions are present in an aqueous solution by adding Ba++ and Ag++ and
noticing what does or does not precipitate as one oxidizes, reduces,
acidifies, and basifies the mixture.
Secondly, a quite different use stems from the fact that, as its name
Barium has quite a high atomic weight (the heaviest stable alkaline earth)
and hence is good at blocking x-rays. If my memory serves me correctly,
radiologists often have their patients drink some barium salts to make their
internal organs stand out more prominently.
As for your lithium carbonate, the above mentioned book on ceramic
science talks about how lithium ceramics have abnormally small
coefficients of expansion and hence are extremely resistant to
thermal shock --- the ceramic version of invar, I suppose. That might
make them a useful material for making labware and apparatus. In fact,
some of them even have negative coefficients of thermal expansion!
So, if you are into doing your chemistry at extreme temperatures, you
might want to synthesize a batch of this stuff and play around with it.
[Edited on 4-1-2008 by microcosmicus]
[Edited on 4-1-2008 by microcosmicus]
|
|
microcosmicus
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 287
Registered: 31-12-2007
Member Is Offline
Mood: spin up
|
|
@not_important
Whilst I didn't see any lead on my shopping sprees at the pottery place,
I did see plenty of cadmium, which is just as nasty.
@MagicJigPipe (most recent post)
I would guess that the tin compound is SnO, which is used to make
glazes opaque.
[Edited on 4-1-2008 by microcosmicus]
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
The tin compound is not SnO, but SnO2. The latter is a very inert off-white powder, which is not easy at all to dissolve in any acid or base. It can
be dissolved in molten alkalies. SnO, on the other hand, is a fairly reactive oxide with a dark color, which easily dissolves in concentrated HCl to
make solutions of SnCl2.
|
|
MagicJigPipe
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
Update:
The cobalt oxide that I obtained dissolved in 35% HCl at room temperature in a couple of hours. I wonder why mine was so easy to dissolve and woelen
had to use hot HCl and it still didn't dissolve fully. Interesting....
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
Pages:
1
2 |