Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: what did i make? Cu+H20+NaCl+NaOH-=?
hvchem120
Harmless
*




Posts: 3
Registered: 23-10-2007
Member Is Offline

Mood: No Mood

[*] posted on 23-10-2007 at 23:03
what did i make? Cu+H20+NaCl+NaOH-=?


so i took about 10 oz of distilled water, added 1/4 of a cup of pure salt, and put a copper pipe into it on both the anode and cathode sides of my electrolysis hookup (50V@400000uf dc) for 10 repetitions (charge up bank, discharge through copper pipe, repeat.) the water at this stage was a bright green and, yes chlorine was emitted by the electrodes. then i filtered it into a 250ml flask (there was some left over, i ended up diluting it and tossing it,) and put it on my hotplate/stirrer and boiled/stirred it until there was only 100ml left. then i added about 1/8 of a teaspoon of red devil lye and it turned bright, transparent blue. then i poured it into a plastic bottle and sealed it and froze it. so now i have purple ice in the bottle and it smells slightly of ammonia. so what did i make? i've taken chemistry in high school, but none in college, i've electrolyzed other things before, but this is different. they've never changed color so vividly before. i wanted to see what would happen, but now i don't know what to do with the result.
View user's profile View All Posts By User
woelen
Super Administrator
*********




Posts: 8014
Registered: 20-8-2005
Location: Netherlands
Member Is Offline

Mood: interested

[*] posted on 23-10-2007 at 23:10


The deep blue color of the strongly alkaline liquid can perfectly be explained if ammonia is present and this also is in line with your observation of smelling it. Copper(II) ions form a deep blue complex ion with ammonia and this complex is stable enough to even dissolve Cu(OH)2, giving the complex ion and free hydroxide ions. The formula of the complex is [Cu(NH3)4](2+), it is called tetrammine copper(II).

The only peculiar thing is, where does the ammonia come from? In your description I see no ammonia or ammonium salts added, so the only thing I can imagine is that it is present as a contamination of something.




The art of wondering makes life worth living...
Want to wonder? Look at https://woelen.homescience.net
View user's profile Visit user's homepage View All Posts By User
hvchem120
Harmless
*




Posts: 3
Registered: 23-10-2007
Member Is Offline

Mood: No Mood

[*] posted on 25-10-2007 at 16:09


ok. i don't know where the contamination came from but now what should i do with it? can i dilute it and pour it down the drain, or do i have to take it to a hazardous waste center?
View user's profile View All Posts By User
Xenoid
National Hazard
****




Posts: 775
Registered: 14-6-2007
Location: Springs Junction, New Zealand
Member Is Offline

Mood: Comfortably Numb

[*] posted on 25-10-2007 at 16:29


Quote:
Originally posted by hvchem120
.....or do i have to take it to a hazardous waste center?


I think you can safely pour it down the drain...:D

Regards, Xenoid
View user's profile View All Posts By User
chemkid
Hazard to Others
***




Posts: 269
Registered: 5-4-2007
Location: Suburban Hell
Member Is Offline

Mood: polarized

[*] posted on 25-10-2007 at 17:23


Next time, consider where you are going with a reaction so you don't end up with something you don't know what to do with. :)



View user's profile View All Posts By User
hvchem120
Harmless
*




Posts: 3
Registered: 23-10-2007
Member Is Offline

Mood: No Mood

[*] posted on 25-10-2007 at 21:23


what i wanted was something that i could use to electroplate stuff with copper. however, i don't want an ammonia complex, as it has a tendency to make toxic fumes when heated (eg during electroplating.)
View user's profile View All Posts By User
Xenoid
National Hazard
****




Posts: 775
Registered: 14-6-2007
Location: Springs Junction, New Zealand
Member Is Offline

Mood: Comfortably Numb

[*] posted on 25-10-2007 at 22:07


If you want to do copper plating, you would be better off starting with some copper sulphate, which is readily available from garden centres, at least around here!

Regards, Xenoid
View user's profile View All Posts By User
chemkid
Hazard to Others
***




Posts: 269
Registered: 5-4-2007
Location: Suburban Hell
Member Is Offline

Mood: polarized

[*] posted on 26-10-2007 at 12:01


Copper sulphate is used for root killers in the US

chemkid




View user's profile View All Posts By User
Mumbles
Hazard to Others
***




Posts: 436
Registered: 12-3-2003
Location: US
Member Is Offline

Mood: Procrastinating

[*] posted on 28-10-2007 at 15:33


It can be found in larger quantities and cheaper as some sort of pond additive. I believe it either kills roots in the pond, or kills algae. Possibly both. It may also be used to give a bit of a blue tinge to the water. I believe I got a 8-10lb bucket for $20.
View user's profile Visit user's homepage View All Posts By User This user has MSN Messenger
UnintentionalChaos
International Hazard
*****




Posts: 1454
Registered: 9-12-2006
Location: Mars
Member Is Offline

Mood: Nucleophilic

[*] posted on 28-10-2007 at 16:58


Pond additive? Copper is highly toxic to aquatic organisms and just about anything else. It is sold as an algecide for swimming pools. It is also sold to kill tree roots growing in your plumbing by flushing a pound or so down the drain.



Department of Redundancy Department - Now with paperwork!

'In organic synthesis, we call decomposition products "crap", however this is not a IUPAC approved nomenclature.' -Nicodem
View user's profile View All Posts By User

  Go To Top