AndreLeo
Harmless
Posts: 1
Registered: 10-9-2018
Member Is Offline
|
|
fuel cell electrode/bipolar plate
Hello,
I am currently working two very different fuel cell types, one that uses ascorbic acid (sodium salt) as fuel and another one that is a novel iron air
battery technology. The battery uses a liquid (complexed) Fe(III)/Fe(II) (redox couple) salt and a catalyst loaded porous carbon cathode. The fact the
cell uses practically 100% Fe(II)/Fe(III) salt concentration makes it very hard to find bipolar plates/current collectors. Traditional copper or any
other metal won't work, platinum is too expensive and graphite is intercalata-able to ions, so this would reduce efficiency dramatically. I have
suggested using carbon fibre that is impregnated with a polymer, just enough to keep it conductive, but carbon fibre is hardly biocompatible, sooo any
other ideas what I could use? The cell itself has a pretty high current, but the resistance of the carbon fibre would limit this to about 50mA/sqCm
which is too low for my purpose of use (emergency power device)
Thanks a lot,
regards,
André
|
|
CRUSTY
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 139
Registered: 5-6-2016
Location: Nearby
Member Is Offline
Mood: High-Order
|
|
Titanium?
|
|
macckone
Dispenser of practical lab wisdom
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Aluminum or Lead?
There is also a multi-layer approach with your carbon fiber and polymer over a copper core. This will greatly improve your current density.
Or you could try a conductive plastic coating over copper.
There are a number of conductive plastics now on the market.
|
|