laguzaza
Harmless
Posts: 5
Registered: 24-8-2018
Member Is Offline
|
|
How to separate mercury and water soluble metal salts?
Can you separate mercury from water soluble metal salts, say potassium nitrate, with just water?
Here's what I thought about the process.
1.Pour water into the mixture and shake it until metal salt is dissolved.
2.Wait until mercury and metal salt solution are separated due to sedimentation.
3.Pour out the solution to get the remaining mercury.
Do you think this will work?
|
|
unionised
International Hazard
Posts: 5114
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Usually.
It's possible that some metal salts will react with the mercury.
|
|
Sulaiman
International Hazard
Posts: 3657
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
I'm fairly confident that a few washes with tap water, then a rinse with distilled water, will remove all of the highly soluble nitrate salt.
Metallic mercury is insoluble in water so you can wash as many times as you feel necessary,
the less water/solution remaining after each rinse/decant operation,
the quicker the salt will be diluted to negligible levels.
A quick rinse with dilute nitric acid (if available) will leach out most other metals,
and finally squeezing the mercury through cloth or cotton wool removes any remaining solids.
|
|
fusso
International Hazard
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
Quote: Originally posted by Sulaiman | I'm fairly confident that a few washes with tap water, then a rinse with distilled water, will remove all of the highly soluble nitrate salt.
Metallic mercury is insoluble in water so you can wash as many times as you feel necessary,
the less water/solution remaining after each rinse/decant operation,
the quicker the salt will be diluted to negligible levels.
A quick rinse with dilute nitric acid (if available) will leach out most other metals,
and finally squeezing the mercury through cloth or cotton wool removes any remaining solids. | I think it's
best not to wash with tap water or the chemicals will react with mercury. Who knows how much Ag and Au (both less reactive than Hg) is dissolved in
the water? They will probably be reduced to metallic form and dissolve in the mercury and will be difficult to remove even with HNO3.
|
|
unionised
International Hazard
Posts: 5114
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Practically none because they would have been removed in passing through copper pipes.
However there may be copper in the water (albeit at less than 1 ppm for drinking water).
The elctrochemistry of amalgams is tricky, so I'd not like to have to say whether or not that will react with mercury.
Incidentally, mercury is slightly soluble in water to the extent of about 6 ppm.
Not enough to make a difference to washing it, but enough to make it environmentally unhelpful to do lots of washes.
|
|
Sulaiman
International Hazard
Posts: 3657
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
I live in a poor area where we can't afford to gold plate the insides of water reservoirs, tanks, pipes and taps
If there are metals in your water supply that can't be dissolved/oxidised by nitric acid then I suggest that you relocate to a safer area
Or start recovering PGMs from your water supply
[Edited on 25-8-2018 by Sulaiman]
|
|
fusso
International Hazard
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
I don't even know
what metal(s) my local water pipes are made of, I just know they aren't made of lead and cadmium
[Edited on 25/08/18 by fusso]
|
|
fusso
International Hazard
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
Quote: Originally posted by laguzaza | Can you separate mercury from water soluble metal salts, say potassium nitrate, with just water?
Here's what I thought about the process.
1.Pour water into the mixture and shake it until metal salt is dissolved.
2.Wait until mercury and metal salt solution are separated due to sedimentation.
3.Pour out the solution to get the remaining mercury.
Do you think this will work? | Actually is this a hypothetical problem or a real trouble you made?
|
|
laguzaza
Harmless
Posts: 5
Registered: 24-8-2018
Member Is Offline
|
|
Thanks guys, your answers really helped me a lot!
Quote: Originally posted by fusso | Quote: Originally posted by laguzaza | Can you separate mercury from water soluble metal salts, say potassium nitrate, with just water?
Here's what I thought about the process.
1.Pour water into the mixture and shake it until metal salt is dissolved.
2.Wait until mercury and metal salt solution are separated due to sedimentation.
3.Pour out the solution to get the remaining mercury.
Do you think this will work? | Actually is this a hypothetical problem or a real trouble you made?
|
A hypothetical problem. I was wondering if just water is enough to break bonds of water soluble metal salt amalgam and free mercury from it. By the
way can you call such mixture an amalgam?
[Edited on 26-8-2018 by laguzaza]
|
|
DraconicAcid
International Hazard
Posts: 4306
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Mercury will not amalgamate with ionic compounds, only with metals.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|