Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
metal vapor lights
For those interested in aquiring metal vapor lights I thought I would show off my semi-ghetto equipment. The 1st one I made is a reassembled 35W
sodium vapor light. It came as a security light with a huge clunky housing and lens. I discarded all but the ballast and socket, remounting them to
a wooden box. The holes are for ventilation to prevent heat buildup. Main purpose for this is for use with my Cenco polarimeter.
The second and very recent construction is a 100W mercury vapor light. This also is a security light. I kept the housing as it provided a good solid
mounting for the heavy ballast. The socket I remounted remotely in an effort to have a more user friendly light for use in my hood. This will be
used for chlorinations and such. It also can be used, I understand, to attract moths, as they are partial to the blue wavelengths.
It is interesting to note that the mercury vapor light was priced at $37 whereas if you try to buy just the ballast I could not find one cheaper than
about $75.
Below is a picture of the two lights. After dark I will take a picture of them lit and post it.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
chemkid
Hazard to Others
Posts: 269
Registered: 5-4-2007
Location: Suburban Hell
Member Is Offline
Mood: polarized
|
|
Is it plausible to condense mercury or sodium from one of theese lamps? Not so sure about ordering an ounce of sodium from Unitednuclear, much rather
make some myself.
Chemkid
|
|
|
Jdurg
Hazard to Others
Posts: 220
Registered: 10-6-2006
Location: Connecticut, USA
Member Is Offline
Mood: No Mood
|
|
You would need a lot, and I mean a LOT of these lamps in order to accumulate any visible amount of sodium or mercury. The amount of metal inside
these tubes is next to nothing. Just enough to conduct a current and emit light. A single tube won't give you any visible amount of metal at all.
\"A real fart is beefy, has a density greater than or equal to the air surrounding it, consists of the unmistakable scent of broccoli, and usually
requires wiping afterwards.\"
http://maddox.xmission.com. |
|
|
not_important
International Hazard
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
by this patent
http://www.freepatentsonline.com/4075530.html
the amount of sodium is less than 0.05 milligrams of sodium and less than 0.6 mg mercury per cc of lamp volume. Note that volume is
<u>not</u> of the bulb that you see, but rather that of the alumina tube at the center, which for typical lamps has a volume of 4 to 8 cc.
[Edited on 24-6-2007 by not_important]
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
Here's the picture of the lights lit, 35W sodium vapor on the left and 100W mercury vapor on the right. I'm going to leave the mercury vapor light on
for awhile and see if any big moths show up.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
chemkid
Hazard to Others
Posts: 269
Registered: 5-4-2007
Location: Suburban Hell
Member Is Offline
Mood: polarized
|
|
I went to wikipedia and found this:
"It has two inner borosilicate glass U-pipes that hold solid sodium and a small amount of neon and argon gas Penning mixture"
I checked several other sources as well. Solid sodium metal is contained in low pressure sodium vapor lamps (however not high pressure). ANd i would
bet if you have a friend in the town goverment then you can get them for free. I would bet that if you could get some old used ones there would still
be some recoverable sodium metal. Furthermore, barium is used as a getter in these lamps to make a vaccum, so you get some of that too. or if you can
afford it just order one for forty dollars with fresh sodium in it.
Chemkid
[Edited on 26-6-2007 by chemkid]
[Edited on 26-6-2007 by chemkid]
|
|
|
not_important
International Hazard
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Low-pressure sodium vapor discharge lamp
United States Patent 4401914
"The lamp contains neon and approximately 30 mg of sodium. "
Although some of the large older models have up to a gram of sodium in them. But $40/gr sounds a bit pricey to me. The low pressure lamps are less
common, because of their narrow band light output which trashes colour rendition and makes depth perception difficult.
Barium getters - remember that the getter is heated to cause barium to vapourise and form a very thin mirror on part of the interior of the tube or
bulb, it's not sitting there as a lump.
While these are CRT getters, you can get a feel for how much barium would be in a street light, as that is proportional to the volume to be scrubbed.
http://www.saesgetters.com/default.aspx?idpage=460
|
|
|
indigofuzzy
Hazard to Others
Posts: 145
Registered: 1-10-2006
Location: DarkCity, Bay of Rainbows, Moon
Member Is Offline
Mood: Distilled
|
|
| Quote: |
It also can be used, I understand, to attract moths, as they are partial to the blue wavelengths.
|
I thought the moths (and many other flying insects) liked the longwave near-UV though, which mercury vapor lamps produce in abundance. And I know this
is nitpicky, but the closest to a blue line in a mercury vapor discharge is the indigo/violet line. But your color perception may vary. 
|
|
|
Eclectic
National Hazard
Posts: 899
Registered: 14-11-2004
Member Is Offline
Mood: Obsessive
|
|
If you can run the mercury lamp with the outer glass shell removed, you can get lot's of long and short wave UV. I think the inner pressure tube is
made of fused silica to be able to withstand the heat and pressure. I had one set up to erase UV erasable E-proms, back in the day when that was the
only technology in use. No 15-20 minutes with a UV lamp to erase my E-proms. Mine were zapped in 30 seconds.
[Edited on 6-27-2007 by Eclectic]
|
|
|
MagicJigPipe
International Hazard
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
@JDurg:
| Quote: | | You would need a lot, and I mean a LOT of these lamps in order to accumulate any visible amount of sodium or mercury. |
I disagree. I saw a 175 W Hg vapor lamp at a famous US home improvement store the other day. The outside glass had no phosphors so you could see the
actual Hg vapor lamp inside. I could see easily visible droplets of Hg on the sides. In fact, I was shocked at how much mercury was in
there. There were at least 5 drops with a diameter of about 1 mm.
I think you are thinking of common fluorescent bulbs. That is true for those (except for some tanning bulbs, which can contain visible droplets of
Hg).
[Edited on 6-22-2011 by MagicJigPipe]
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
|
Rogeryermaw
National Hazard
Posts: 656
Registered: 18-8-2010
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Eclectic  | If you can run the mercury lamp with the outer glass shell removed, you can get lot's of long and short wave UV. I think the inner pressure tube is
made of fused silica to be able to withstand the heat and pressure. I had one set up to erase UV erasable E-proms, back in the day when that was the
only technology in use. No 15-20 minutes with a UV lamp to erase my E-proms. Mine were zapped in 30 seconds.
[Edited on 6-27-2007 by Eclectic] |
light sensitive e-proms are crazy. not so long ago i installed high-end security equipment and occasionally after the install, upon photo-documenting
our work, the camera flash would ruin the programming in the chip. took a while for us to figure out why. putting vinyl tape over the chip solved the
problem.
|
|
|
Intergalactic_Captain
Hazard to Others
Posts: 228
Registered: 4-9-2004
Location: somewhere where i don\'t know where i am
Member Is Offline
Mood: frabjous
|
|
Shot in the dark, but I'm guessing that you're working with magnetic rather than electronic ballasts - Being salvaged and "heavy," they sound
old-school. As such, you should be able to find ballast set-ups in the $50 range for anything up to about 500 watts - Believe it or not, when I built
my projector, the smaller the ballast the more expensive it was - Opposite for the bulbs.
Which brings this up - Say you want to design a system around a bulb - The following is not complete and will be poorly explained, but it took me
quite a while to figure out just how the hell a ballast works and this will probably help someone...
I wanted a 150 watt system. It was the perfect balance and I had a couple of cheap MH bulbs to work with. I got lucky and found the perfect
ballast/ignitor pair for $50, an unused NOS service kit on ebay. IMO, it is much easier and cheaper to build around a bulb than around a ballast than
to go the other way or to buy something complete - Of course, the dumpster-diver will toss in some caveats...
Essentially, the ballast system is nothing more than a large inductor and HV capacitor wired in such a way as to provide a high-voltage spark to
strike the arc and a controlled current source to maintain it. The inductor serves only one purpose - limiting the current to the bulb. The bulb
itself is essentially a contained lightning bolt - It will happily consume as much current as can be delivered to it, until either it melts and breaks
the arc or overdraws the current source.
...That said, when designing a system, one must think opposite the way one would design any other power supply - Take my 150 watt bulb for example -
It's designed to work at 150 watts. Intuition would say that a 200 wat ballast would give a good safety margin, but that's the direct opposite of
what you want to do. In reality, the bulb will see that 200 watts are available and use it all until catastrophe strikes - It is much better, if one
cannot find the perfect match, to use a smaller ballast than bulb - Say you have a 175 watt bulb and can only find a 150 watt ballast... It won't
work optimally, but on the other hand it won't overdraw.
Another note, sodium and mercury systems are for all intents and purposes interchangeable - You can use a sodium bulb in a mercury system and vice
versa - MH is where it gets tricky, as the strike and restrike procedures are a bit different. Also, I'm not familiar with the type of spectrometer
you're building, but for something wide-spectrum MH would be the better way to go, much more so with the wide variety of "color temperatures"
available.
If you see me running, try to keep up.
|
|
|
watson.fawkes
International Hazard
Posts: 2793
Registered: 16-8-2008
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Intergalactic_Captain | | Essentially, the ballast system is nothing more than a large inductor and HV capacitor wired in such a way as to provide a high-voltage spark to
strike the arc and a controlled current source to maintain it. The inductor serves only one purpose - limiting the current to the bulb. The bulb
itself is essentially a contained lightning bolt - It will happily consume as much current as can be delivered to it, until either it melts and breaks
the arc or overdraws the current source. |
All true insofar as it goes. I want to elaborate on two points.
An arc is like a very low value resistor that doesn't obey Ohm's Law. In one sense, it's like a short circuit; it offers little resistance to
electrical flow. In another, it's definitely a resistor, as it dissipates heat and generates a voltage drop. Regardless, it's the inductor in a
traditional magnetic ballast that limits current flow, not the arc. Also, while it's physical possible to run an arc on DC, regulating it quite
difficult. By contrast, the AC impedance of an inductor limits current flow without big losses.
The second point is that if you're scratch-building one of these systems, it's useful to use a push-to-start button in them. This connects the
starting circuitry up only when manually starting and leaves it out of the circuit at other times. This alleviates stress on the parts and allows
smaller (and cheaper) components. These aren't well-suited for building lighting, because there you want a single light switch. For a piece of lab
gear, push-to-start is just fine.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
