Sidmadra
Hazard to Others
Posts: 129
Registered: 17-2-2017
Member Is Offline
Mood: No Mood
|
|
How do you clean stubbornly dirty glassware when no solvent seems to work?
I've got a bunch of round bottom flasks from over the years that have been left unused because they have material in them that no solvent or hot
alkali can seem to dissolve or get rid of. A few of the flasks are old rotovap flasks, and others are ones where very tarry reactions took place in.
If I could fit my hand in there I'm sure I could scrub the material away, but that's not an option. Abrasive cleaning powder is suggested by Sigma
Aldrich but I have no idea how to actually use such.
|
|
|
DraconicAcid
International Hazard
Posts: 4334
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
I generally put in a bit of nitric acid and boil it with a Bunsen burner.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Sidmadra
Hazard to Others
Posts: 129
Registered: 17-2-2017
Member Is Offline
Mood: No Mood
|
|
Can you describe what a "bit" is? Concentration? And why a Bunsen burner in particular? When I think of Nitric Acid and open flames, potential boom
come to mind.
|
|
|
JJay
International Hazard
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
Piranha solution will oxidize almost anything organic, including elemental carbon.
|
|
|
XeonTheMGPony
International Hazard
Posts: 1640
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
50ml 35% peroxide 150ml H2SO4 = dissolve any thing with carbon including carbon when heated.
|
|
|
BromicAcid
International Hazard
Posts: 3247
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
5% ammonium bifluoride solution and/or elbow grease.
|
|
|
mackolol
Hazard to Others
Posts: 459
Registered: 26-10-2017
Member Is Offline
Mood: Funky
|
|
In most cases usual 98% sulphuric acid does the job. You can heat it if seems to not work. Also you can try with permanganic acid with h2so4 and kmno4
BUT USE CONCENTRATION OF H2SO4 LESS THAN 80% (if i remember well) AND DO IT CAREFULLY. Unless you will produce anhydride of permanganic acid Mn2O7
which will explode instantly in contact with any compound containing carbon.
|
|
|
Sulaiman
International Hazard
Posts: 3697
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
I have 6mm glass spheres that I use for column packing;
I 1/4-fill the vessel with glass beads then my solvent of choice (soap&water is good)
swirling this mixture cleans glass without any visible scratching.
I guess sand or salt or dirt would perform similarly.
|
|
|
DavidJR
National Hazard
Posts: 908
Registered: 1-1-2018
Location: Scotland
Member Is Offline
Mood: Tired
|
|
Quote: Originally posted by mackolol  | | Also you can try with permanganic acid with h2so4 and kmno4 BUT USE CONCENTRATION OF H2SO4 LESS THAN 80% (if i remember well) AND DO IT CAREFULLY.
Unless you will produce anhydride of permanganic acid Mn2O7 which will explode instantly in contact with any compound containing carbon.
|
I would advise using 50% or less H2SO4 if you try this, because I had a bad experience with accidental manganese heptoxide even
with care to stay below the touted 80%.
|
|
|
CobaltChloride
Hazard to Others
Posts: 239
Registered: 3-3-2018
Location: Romania
Member Is Offline
|
|
I have a bucket of Na3PO4 and strong detergent solution in which I soak my glassware. This seems to remove many stains and usually leaves the
glassware sparkling clean. It was also able to loosen some waxy residue which was sticking to my RBF. After soaking I use a nylon tube brush from the
supermarket which also has nylon fibers on its head to scrub the inside of the flask. If this doesn't work, I put some of that detergent+Na3PO4
solution in the flask and add some fine sand and swirl the flask so that the sand covers the interior. Sometimes I use sand and an organic solvent
(like THF, acetone or naphtha). This way I was able to remove all stains.
[Edited on 20-7-2018 by CobaltChloride]
|
|
|
DraconicAcid
International Hazard
Posts: 4334
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
| Quote: Originally posted by Sidmadra | | Can you describe what a "bit" is? Concentration? And why a Bunsen burner in particular? When I think of Nitric Acid and open flames, potential boom
come to mind. |
I pour in a few mL and boil that. Nitric acid is not flammable at all, so there's not going to be any potential boom unless it's mixed with an
organic solvent that would go boom anyway.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
j_sum1
Administrator
Posts: 6325
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
There is a sticky on cleaning glassware. It contains a lot of good information and is well worth a read. If you cannot find a solution then there is
definitely something very strange.
https://www.sciencemadness.org/whisper/viewthread.php?tid=24...
I will let this thread run as an active discussion rather than merge it. I think the sticky is quite concise without a lot of rambling discussion and
it would be better to keep it that way. But I will put a link from there to here.
|
|
|
DavidJR
National Hazard
Posts: 908
Registered: 1-1-2018
Location: Scotland
Member Is Offline
Mood: Tired
|
|
Has anyone tried a lab cleaning product called Decon 90? Tempted to order some and give it a go.
http://www.decon.co.uk/english/decon90.asp
|
|
|
Sidmadra
Hazard to Others
Posts: 129
Registered: 17-2-2017
Member Is Offline
Mood: No Mood
|
|
Thanks for all the replies everyone. I will try a number of these solutions and see what works best.
On a side note, does anyone know what the shelf stability/life is of Piranha solution?
[Edited on 20-7-2018 by Sidmadra]
|
|
|
weilawei
Hazard to Others
Posts: 130
Registered: 3-12-2017
Member Is Offline
Mood: No Mood
|
|
Don't store it. Make it, use it, neutralize it, and dispose of it in one session. See instructions on SM wiki.
|
|
|
Dr.Bob
International Hazard
Posts: 2736
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I like a base bath for stubborn stains. Just dump 4-8 ounces of NaOH per gallon of EtOH, let dissolve, soak dirty stuff overnight, and it will
remove everything from glass, including some of the surface. We use that often for nasty goos and black tars.
|
|
|
DavidJR
National Hazard
Posts: 908
Registered: 1-1-2018
Location: Scotland
Member Is Offline
Mood: Tired
|
|
| Quote: Originally posted by Dr.Bob | | I like a base bath for stubborn stains. Just dump 4-8 ounces of NaOH per gallon of EtOH, let dissolve, soak dirty stuff overnight, and it will
remove everything from glass, including some of the surface. We use that often for nasty goos and black tars. |
Personally a base bath is routine cleaning for me. I don't call it stubborn until the base bath fails.
I use KOH in water though. It's just less hazardous than having vats of flammable liquids around. Also, I find KOH works better than NaOH because it's
considerably easier to rinse off because of the increased solubility.
|
|
|
zed
International Hazard
Posts: 2283
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Abrasive cleaning powder?
For cleaning diner coffee pots ut Dutch Cleanser (Ajax etc.) in flask, add ice
cubes.....Swirl.
If you need heat: Ajax, boiling water, and Glass Beads.... Might serve.
|
|
|
VSEPR_VOID
National Hazard
Posts: 719
Registered: 1-9-2017
Member Is Offline
Mood: Fullerenes
|
|
Sodium thiosulfate for iodine, H2O2/H2SO4, ISPA, Nitric Acid, H2O2/HCl
Within cells interlinked
Within cells interlinked
Within cells interlinked
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
