Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Will Gallium wet glass in an inert atmosphere?
ChemistryGhost
Hazard to Others
***




Posts: 113
Registered: 5-7-2012
Member Is Offline

Mood: Supercooled :cool:

[*] posted on 15-3-2018 at 13:39
Will Gallium wet glass in an inert atmosphere?


Will gallium metal wet glass in an inert atmosphere of nitrogen, argon, or neon?
I think it's the gallium oxide that wets the glass, not the gallium itself.
Gallium metal won't oxidize in an inert atmosphere, so I think it might not wet glass.
Same goes for the galinstan alloy.
I'm not sure though.




"Imagination is more important than knowledge" ~Einstein
View user's profile View All Posts By User
Reboot
Hazard to Others
***




Posts: 141
Registered: 8-8-2017
Member Is Offline

Mood: No Mood

[*] posted on 15-3-2018 at 17:30


Interesting thought. My assumption would be that gallium doesn't have much affinity for gallium oxide...but then, I'm not sure why gallium has an affinity for silicon oxide (glass) either. :-)

My first thought was to toss some granules in a flask, suck out the air, then heat it liquify the gallium (or even do the same with a nitrogen flush instead of vacuum)...but that wouldn't really address the question of whether pre-existing oxides or impurities within the gallium were involved in the wetting phenomenon.

Hopefully somebody else will have ideas on either purifying/reducing the gallium to make it a valid test or explaining what might be driving the phenomenon.
View user's profile View All Posts By User
Melgar
Anti-Spam Agent
*****




Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline

Mood: Estrified

[*] posted on 15-3-2018 at 21:15


Yeah, it will. They have to use a special coating on the inside of galinstan thermometers for that reason. The best way to keep gallium from wetting glass is to put some other liquid in the bottle with it. Lots of different liquids work. Dilute sodium or potassium hydroxide solution seems to work well. It will dissolve gallium oxide, but gallium won't oxidize just from water like aluminum will, and needs oxygen from the air to form its oxide. So if you keep the bottle closed, the KOH or whatever will dissolve the oxide layer off and stop there.



The first step in the process of learning something is admitting that you don't know it already.

I'm givin' the spam shields max power at full warp, but they just dinna have the power! We're gonna have to evacuate to new forum software!
View user's profile View All Posts By User

  Go To Top