Foeskes
Hazard to Others
Posts: 156
Registered: 25-2-2017
Member Is Offline
Mood: No Mood
|
|
Are metal ammine complexes unstable in concentated sodium hydroxide solution?
I'm going to precipitate separate nickel and chromium from iron by complexity them with ammonia and precipitate the iron ad Fe(OH)2. But I have to
convert them both to the hydroxide to separate the two of them. So will sodium hydroxide destroy the complexes or do I have to use another route?
|
|
|
DraconicAcid
International Hazard
Posts: 4333
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Online
Mood: Semi-victorious.
|
|
Concentrated sodium hydroxide should destroy the complexes, yes. The nickel one particularly.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
wg48
National Hazard
Posts: 821
Registered: 21-11-2015
Member Is Offline
Mood: No Mood
|
|
Some alkali (for example ph10) formulations of electro less nickel use ammonia to complex the nickel and prevent the precipitation of the hydroxide.
So if iron hydroxide is precipitated at that ph significant separation will be achieved. How easily the iron hydroxide can be filtered out is an other
problem.
|
|
|
DraconicAcid
International Hazard
Posts: 4333
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Online
Mood: Semi-victorious.
|
|
I know that dry [Ni(NH3)6]Cl2 will readily lose ammonia at room temperature- if you heat a concentrated solution of the ammonia complex, especially if
there's high concentrations of hydroxide, you'll probably boil off the ammonia.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
