kibitaki
Harmless
Posts: 2
Registered: 10-11-2015
Member Is Offline
Mood: No Mood
|
|
My variable power supply broke in four days...
Hello,
I've just recently got a variable DC power supply (at 30V/5A). It was at first running very well for electrolysis... the problem is now though, that
the voltage inexplicably drops to zero, as soon as I turn the knob forward. With a load attached, this is almost instant. This happens every time I
turn on the power, and only after about four or so days in total of continuous use in very, very low current.
This happened apparently overnight, while the power was off, strangely. I couldn't find this specific problem while searching... what would
have caused this?
It is a (kind of) cheap machine from eBay after all, so maybe is this machine just defect?
|
|
hyfalcon
International Hazard
Posts: 1003
Registered: 29-3-2012
Member Is Offline
Mood: No Mood
|
|
Your anode could have passivated. What kind of electrolysis and at what current were you running?
|
|
lavenatti
Harmless
Posts: 17
Registered: 19-12-2006
Member Is Offline
Mood: No Mood
|
|
Does it have current limiting? It may be set too low or you are simply drawing more current than it's capable of delivering.
Try testing it with a known load.
|
|
kibitaki
Harmless
Posts: 2
Registered: 10-11-2015
Member Is Offline
Mood: No Mood
|
|
I've tested with a 5W/15Ω resistor just now, it displays current and voltage when the power is turned on, but this instantly drops to zero.
This happens too without a load. The voltage stays for maybe a second, then drops down to zero. Turning the knob forward again gives less and less
voltage as it drops.
|
|
hyfalcon
International Hazard
Posts: 1003
Registered: 29-3-2012
Member Is Offline
Mood: No Mood
|
|
Yep, it's fried sounds like.
Have you put a multimeter on it? You could luck out.
[Edited on 11-11-2015 by hyfalcon]
|
|
j_sum1
Administrator
Posts: 6326
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
Four days old. I'd request a refund / replacement. Chances are that you get to keep the broken one. Then you have spare parts or maybe with a
simple repair, a second box.
|
|