aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Water Analysis Machine/Instrument
Would anybody have a suggestion for the best machine (or type) for the analysis of water, particularly in respect of dissolved carbonate, magnesium,
nitrogen etc.
N, P, K, Ca, S, Mg and oxygen content are the major variables, with Fe, Cl, Mn, B, Zn, Cu and Mo levels being desirable.
It's for scientifically growing plants hydroponically, so accurately measuring the ppm of each component of the water will be vital.
|
|
|
m1tanker78
National Hazard
Posts: 685
Registered: 5-1-2011
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by aga  | Would anybody have a suggestion for the best machine (or type) for the analysis of water, particularly in respect of dissolved carbonate, magnesium,
nitrogen etc.
N, P, K, Ca, S, Mg and oxygen content are the major variables, with Fe, Cl, Mn, B, Zn, Cu and Mo levels being desirable.
It's for scientifically growing plants hydroponically, so accurately measuring the ppm of each component of the water will be vital.
|
Build or buy?
Continuous or batch?
If batch, how often?
I don't have any instruments in mind but a few options come to mind:
=Take a sample to your municipal water works (or whatever it's called) for testing.
=Take a sample to a local agricultural school/college.
=I don't think the pool supply store is even an option but you never know..
Instrument-wise, maybe a LIBS rig would do? I'm thinking along the lines of boiling down a sample and firing the laser at the residue sitting on a
nickel spatula or spoon. Never used one so I don't know if that's even possible.
Chemical CURIOSITY KILLED THE CATalyst.
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
I'm looking to Buy rather than Build.
It will be used for testing batches of the plant irrigation water to check on the levels of the Nitrates, Phosphates etc. so they can be plotted over
time along with the plant growth metrics.
|
|
|
Fulmen
International Hazard
Posts: 1718
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
What's your budget? You basically have to set up a full lab to cover all nutrients, this is not something you can jerry-rig for any reasonable cost.
Some can be measured with simple analyzers like these: http://www.specmeters.com/nutrient-management/nutrient-meter...
We're not banging rocks together here. We know how to put a man back together.
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Cool. Thanks Fulmen.
Those gadgets look like just the thing.
I'll probably be better off with stuff like that as i'd have a clue how to use them ...
FTIR/GC/NMR probably come with much bigger manuals.
|
|
|
battoussai114
Hazard to Others
Posts: 235
Registered: 18-2-2015
Member Is Offline
Mood: Not bad.... Not bad.
|
|
I'd guess an ion chromatograph and something else to detect dissolved oxygen... These chromatography equipment are probably pretty expensive, but
afaic its the way to go for drink water analysis, so it should detect dissolved minerals.
|
|
|
Ozone
International Hazard
Posts: 1269
Registered: 28-7-2005
Location: Good Olde USA
Member Is Offline
Mood: Integrated
|
|
Yes. IC is the way to go for most of that. Na, NH4, K, Mg, Ca, Zn, etc. via cation IC (conductivity detector with a CS-12 cation column, 22mM
methanesulfonic acid eluent or equivalent); the same instrument with an anion column (AS-11 or equivalent) and suppression will get chloride, bromide
(-ates, too), carbonate, phosphate, sulfate, etc. and most of the organic acids (through aconitate) using a NaOH gradient.
The simple rig, say an old dionex DX-300 can be had pretty cheap on a popular auction site. But, still, this can be complicated and relatively
expensive.
Because you know what you are mixing into your solution(s), perhaps a simple pH/conductivity meter (which can be correlated to total dissolved solids)
might do in a pinch? You can also get ion-selective probes to go with it. A REDOX probe and DO meter might be useful, as well.
O3
-Anyone who never made a mistake never tried anything new.
--Albert Einstein
|
|
|
Little_Ghost_again
National Hazard
Posts: 985
Registered: 16-9-2014
Member Is Offline
Mood: Baffled
|
|
Erm maybe an aquarium test kit? some do nearly 30 different tests and are cheap.............
Dont ask me, I only know enough to be dangerous
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Yep. They seem to be the simplest/cheapest way to get a rough idea of what's in the water.
Test strips arrived for pH, total alkalinity (?), Hardness, Nitrates and Nitrites.
Amazingly i did the maths right and my nutrient solution is spot on !
Now to see if the plants like it.
Edit :
Hmm.
Tomato plants are not supposed to spontaneously ignite are they ?
Maybe a bit less Nitrate will work better next time.
[Edited on 23-8-2015 by aga]
|
|
|
Little_Ghost_again
National Hazard
Posts: 985
Registered: 16-9-2014
Member Is Offline
Mood: Baffled
|
|
http://www.petco.com/product/112561/NutraFin-Master-Aquarium...
Thats the best fresh water kit I have used, you can pick them up cheap if you shop around, I looked into the msd sheets to see if I could make my own
kit. some of the reagents are expensive but if your doing many tests then you save a fortune! I will try and find the MSD sheet for the test kit
above, some of the tests you can replicate with cheap chems  .
I got loads of info on hydroponics somewhere, exactly for tomatoes! alot of it was for cannabis but apparently cannabis, tomatoes and stinging nettles
thrive on exactly the same conditions. I wanted it for tomatoes for the soap fragrance thing but found much more info on cannabis so used that
instead. Forget the molasses nonsense etc it causes more agro than its worth. The trick is a subtle balance like in dutch aquarium, also look into CO2
water injection  / Way way better than co2 around the leaves, bubble it into
solution and drip solution at a ph controlled rate into main stream, there are charts online to figure the correct amount from your hardness starting
point (ok you can snigger at that) .
I found all the stuff I learned about dutch plant tanks transferred well to hydroponics, there is alot of bolloxs around about hydroponics. But
carbonic acid added during daylight massively increases yield. funny though I cant remember any the cannabis stuff mentioning that but I know it works
and use it myself .
dunno about tomatoes catching fire by themselves......... fuck everything I touch seems to ignite! I keep my yeast stuff in the polly tunnel so I guess mine might one day
[Edited on 25-8-2015 by Little_Ghost_again]
Dont ask me, I only know enough to be dangerous
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Experiments already under way.
The worst thing about plant experiments is waiting for them to grow.
It takes days !
Here's what the tests are for :-
The three buckets will harbour Vast tomato Universes, and the drainpipe will grow incalculable Tonnage of basil, mint and lettuce daily.
Or not.
We'll see.
The pipe next to the buckets is the drain, which flows into the resevoir at the bottom.
The tupperware-with-wires houses the arduino controller for the pumps.
Internet connected with control & data logging too. Woo !
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
