pantone159
National Hazard
Posts: 590
Registered: 27-6-2006
Location: Austin, TX, USA
Member Is Offline
Mood: desperate for shade
|
|
Proper size of tubing for condensor/vacuum
Is there an official size for the tubing to connect to a condensor (water) and to vacuum connections?
Say, for 19/22 equipment. A 5/16 inch ID tube seems to fit the condensor ok, but I wonder if there is something specific that is recommended.
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
I have a 19/22 glassware kit. I buy 1/4" ID surgical tubing to carry water. This is cheap and readily available by the foot at my local hardware
store.
For the vacuum hose I buy the red 1/4" ID thick walled rubber vacuum hose from a scientific supply house.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
