flyingbanana
Harmless
Posts: 38
Registered: 1-3-2005
Member Is Offline
Mood: No Mood
|
|
old nitromethane
quick question, does nitromethane degrade into anything dangerous over time? there is a bottle of ~30% nitro racing fuel that needs to be distilled,
but it is just over a year old. new, so it hasn't been opened yet.
msds doesn't say anything but just want to make sure
there is also a bottle that HAS been opened, ~3 years old but i'm thinking of just throwing that out.
|
|
chemoleo
Biochemicus Energeticus
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
I wouldn't see why as long as you don't get base/alkali into it. 1 year isn't really old at all.
How about 99.5 % nitromethane? I suppose the same argument holds there...
Never Stop to Begin, and Never Begin to Stop...
Tolerance is good. But not with the intolerant! (Wilhelm Busch)
|
|
praseodym
Hazard to Others
Posts: 137
Registered: 25-7-2005
Location: Schwarzschild Radius
Member Is Offline
Mood: crazy
|
|
Well, it depends on how and where did you store your nitromethane. But with proper storage and without contamination, both the 1-year-old and
3-year-old nitromethane are still considered as useful chemicals. The only difference between your nitromethane and a new bottle of nitromethane may
only be that yours may look darker since nitromethane darkens on storage. Hence i advise against dumping any of them away. Don't waste chemicals
Alles sollte so einfach wie möglich gemacht werden aber nicht einfacher.
|
|
chemoleo
Biochemicus Energeticus
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
What is the cause of the darkening? Does it happen with pure NM too?
MSDS:
Stability:
Shock and heat sensitive. Thermally unstable. Reacts violently with a broad range of materials. Contact with organic bases (amines), acids ???
why would that be???, and some metal oxides such as lead pigments, may markedly increase its sensitivity to detonation by shock. Heating of
closed containers may cause detonation. Mixtures of nitromethane and known sensitizers are explosive and should be handled with extreme caution.
Incompatibilities:
Amines, acids, bases, oxidizing materials, metal oxides, aluminum chloride plus organic matter, hexamethylbenzene, hydrocarbons, calcium hypochlorite,
potassium hydroxide, sodium hydroxide, calcium hydroxide. Slowly corrodes steel and copper when wet. Nitromethane in the presence of water can react
with organic bases to form salts which are explosive when dry.
[Edited on 7-4-2006 by chemoleo]
Never Stop to Begin, and Never Begin to Stop...
Tolerance is good. But not with the intolerant! (Wilhelm Busch)
|
|
praseodym
Hazard to Others
Posts: 137
Registered: 25-7-2005
Location: Schwarzschild Radius
Member Is Offline
Mood: crazy
|
|
I believe it is due to the reactivity of nitromethane but not so sure about the actual mechanisms behind the darkening of nitromethane on storage.
Page 4 of the msds data sheet here also claims that nitromethane may darken on storage but gives no explanation about how and why it happens.
Alles sollte so einfach wie möglich gemacht werden aber nicht einfacher.
|
|
Sandmeyer
National Hazard
Posts: 784
Registered: 9-1-2005
Location: Internet
Member Is Offline
Mood: abbastanza bene
|
|
It should be no problems, I've got nitromethane which is over 2 years old, it has got a hint of yellow over the time, but it works as good as new and
that's all I care about.
But why do source the methanol/nitro, nitromethane is available OTC. Every well-equipped store for model cars should stock it pure, if not you can ask
them to order it for you.
|
|
lacrima97
Hazard to Self
Posts: 93
Registered: 24-7-2005
Location: MS
Member Is Offline
Mood: experimental
|
|
Is there a danger of an explosion when distilling nitromethane? I believe I need to do this since the nitromethane that I have doesn't seem pure. It
burns slowly, when in my mind it should deflagerate rapidly. So is distillation very dangerous?
|
|
ordenblitz
Hazard to Others
Posts: 259
Registered: 18-7-2004
Location: Northwest
Member Is Offline
Mood: Bohr'd
|
|
Nitromethane does not deflagrate rapidly. It burns, at room temperature and pressure, in a calm gentle manner very similar to alcohol except that the
flame is an odd luminous white where alcohol is more blue/white.
[Edited on 11-4-2006 by ordenblitz]
|
|
jack-sparrow
Hazard to Others
Posts: 130
Registered: 30-11-2005
Location: Ask Big Brother
Member Is Offline
Mood: ahoy!
|
|
Distilling nitromethane at atmospheric pressure can yield to decomposition. It can be hazardous if there are other chemicals mixed with it (in this
case, your 30% fuel mix). Check the ebook Purification of laboratory chemicals by Perrin and Amarego for more details.
|
|
woelen
Super Administrator
Posts: 8012
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Nitromethane turning yellow over time? I have 1 liter of 99.9% CH3NO2 and this is around 1 year old. If I look through 20 cm of this liquid, it still
is completely colorless, not the faintest yellow coloration.
Probably the yellow coloration is due to some common impurity, which is not present in my 99.9% nitromethane.
Btw, I purchased my nitromethane as a fuel enhancer. The tin has a label on it, stating it is 99.9% nitromethane. I needed some time to find the
source of the chemical. So, it should be possible for you as well to obtain it at high purity but some searching and asking around on a national
chemistry forum may be needed.
|
|
MadHatter
International Hazard
Posts: 1339
Registered: 9-7-2004
Location: Maine
Member Is Offline
Mood: Enjoying retirement
|
|
Nitromethane
Bought mine from a racing fuel distributor who sells it for Top Fuel dragsters and funny cars.
Expensive - $40 gallon + hazmat fee + shipping.
http://www.worldwideracingfuels.com
out of New Canton, Virginia.
From opening of NCIS New Orleans - It goes a BOOM ! BOOM ! BOOM ! MUHAHAHAHAHAHAHA !
|
|
ordenblitz
Hazard to Others
Posts: 259
Registered: 18-7-2004
Location: Northwest
Member Is Offline
Mood: Bohr'd
|
|
WWR fuels requires a lengthy form be filled out on the user and the end use before completing the sale.
|
|
Misanthropy
Hazard to Self
Posts: 69
Registered: 24-3-2005
Member Is Offline
Mood: Variable
|
|
(please forgive my ignorace, chem noob.)
http://en.wikipedia.org/wiki/Nitromethane
Could it be that a 0.1% contam could bind to that single bonded oxygen, pulling some of them together? Or a polymerization?
|
|