blindreeper
Unregistered
Posts: N/A
Registered: N/A
Member Is Offline
|
|
Can I use Al tubing?
I have plans for a home made condenser but it reqiuers a HNO3 resitant material. Is Al tubing good for it? I only want to concentrate my 70% HNO3 with
H2SO4 to make the odd batch of RDX. I have all the glass and stoppers but will the Al tubing do? Also I am using rubber stoppers and they will get
eaten by the HNO3 but if I put Al foil around it would that work? Or even better petrolium jelly (vasiline) would that be reistant or would it just
get eaten?
|
|
|
trinitrotoluene
Hazard to Others
Posts: 142
Registered: 17-10-2002
Location: California
Member Is Offline
Mood: paranoid
|
|
Yes Al tubing will work. But it must be 100% pure or else it will get eatten away slowly. Al foil will work but only use it one time it will get
attacked slowly. And NO don't use petrolium jelly. Al foil is good enough. You may want to create a better seal by using teflon tape its
chemically resistant to almost anything.
TNT
|
|
|
PHILOU Zrealone
International Hazard
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
Al is resistant towards HNO3 but absolutely not towards H2SO4...then best way to dehydrate it would be to use nitrate salt dehydratants!
I don't know if Al will be more resistant in a mix of H2SO4/HNO2 than in H2SO4 alone?
Maybe make a trial with a sample of Al pipe see if it corrodes:
-In HNO3 cold
-In HNO3 warm
-In H2SO4 cold
-In H2SO4 warm
-In HNO3/H2SO4 cold (60/40) mix
-In HNO3/H2SO4 warm (60/40) mix
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
|
DeusExMachina
Hazard to Others
Posts: 136
Registered: 14-10-2002
Location: pakistan
Member Is Offline
Mood: No Mood
|
|
cover the part of your rubber stoppers that are going to be exposed to the HNO3 with teflon tape... my chmistry still isn't good( and even worse
since I left it for like a month and im just starting to get back to it now) so I i don't know for sure if Al will work. Don't make the same
mistake as a me and waste money on copper tubes.. ahaaha i'm stupid
|
|
|
Anders Hoveland
Banned
Posts: 208
Registered: 15-6-2010
Member Is Offline
Mood: No Mood
|
|
Al dissolved in my 60% nitric acid.
However, it seemed resistant to 10% H2SO4, however that may have been because it was pool grade and contained a corrosion inhibitor ?
Aluminum foil did not get burned by pure NaHSO4, but when a little bleach was added, it did slowly burn, even though the solution was still acidic.
I used aluminum foil to direct sulfur trioxide vapor without problems.
|
|
|
hissingnoise
International Hazard
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
| Quote: | | I used aluminum foil to direct sulfur trioxide vapor without problems. |
I can see Al resisting anhydrous SO3 but a trace of H2O should make SO3 rapidly corrode Al. . .
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
