DutchChemistryBox
Hazard to Self
Posts: 74
Registered: 24-3-2013
Location: Strasbourg
Member Is Offline
Mood: No Mood
|
|
Isothermal distillation of hydrochloric acid
Hello,
For a synthesis I want to perform I need hydrochloric acid.
At the moment I only have technical grade hydrochloric acid. I want to purify the acid by isothermal distillation.
My acid is 10%, I want to place it in a closed box together with an equal volume of distilled water, and let it stand for about 10 days. With as goal,
to achieve two 5% HCl solutions (one 'dirty' and one without (much) contaminants).
I have read that this is possible for high concentrations of acid. Would this method also work for lower concentrations (10%)?
If I look to the following table: http://www.solvaychemicals.com/Chemicals%20Literature%20Docu... , I would say no. This because the 5% acid has a higher vapor pressure than the
10% acid.
What do you guys think? Should I ignore the vapor pressure and just try it? Or do I need higher concentrations of acid to start with.
I'm not sure or it has anything to do with the vapor pressure, maybe it only depends on the sollubility of the vapors and the vapor pressure is only a
indication for the time it needs to get in an equilibrium.
Kind regards,
|
|
unionised
International Hazard
Posts: 5119
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
I'm not sure whether the acid will diffuse into the water or if the water will diffuse into the acid.
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Both will happen, but I'd guess that it would be mostly water into acid.
If you have a distillation apparatus (which I highly recommend getting if you don't), you can distill it up to the azeotrope.
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by DutchChemistryBox | I have read that this is possible for high concentrations of acid. Would this method also work for lower concentrations (10%)?
What do you guys think? Should I ignore the vapor pressure and just try it? Or do I need higher concentrations of acid to start with.
|
If you don't actually want to distil then start from technical 37 of 20 w%. Both are quite OTC as drain cleaners, patio cleaners and from various chem
distributors.
It will be much faster. But even faster is distilling off the azeotrope (approx. 20 %) from similar concentration 'dirty' HCl.
Or use a HCl generator: NaCl(s) + H2SO4(95 %) === > NaHSO4(s) + HCl(g) and capture the HCl(g) in pure water.
|
|
DutchChemistryBox
Hazard to Self
Posts: 74
Registered: 24-3-2013
Location: Strasbourg
Member Is Offline
Mood: No Mood
|
|
Thank you all for the advices.
Distilling is indeed an option, I do have enough equipment for it.
But I'm conceited, I've thought about it, I'm still going to try it.
Since I am working as an analytical chemist, it is not really a problem for me to obtain the acid. But I've made a deal with myself, I want to avoid
buying reagent grade chemicals as much as possible. It feels much more rewarding if I can 'make/purrify' it myself.
I have read about this method, but I wasn't sure it would work for lower concentrations. After the experiment I will post my titration results, I am
really curious about the outcome.
If it doesn't work then it is still a nice learning moment. In that case I'm going to buy it, distilling costs to much effort for a little HCl.
[Edited on 13-10-2014 by DutchChemistryBox]
|
|
DutchChemistryBox
Hazard to Self
Posts: 74
Registered: 24-3-2013
Location: Strasbourg
Member Is Offline
Mood: No Mood
|
|
I've performed the experiment, I opened the box after 17 days.
Just before I was going to titrate, I've checked the pH with indicator paper.
See the picture below, that was enough reason for me to throw it al away, I'm going to buy it.
Nice lesson learnt, it does not really work for lower concentrations.
Left side of the paper in the original solution and the right side in the demi.
[Edited on 24-10-2014 by DutchChemistryBox]
|
|