Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: How stable are formaldehyde imines in aq. solutions?
FireLion3
Hazard to Others
***




Posts: 218
Registered: 11-1-2014
Member Is Offline

Mood: No Mood

[*] posted on 4-5-2014 at 13:11
How stable are formaldehyde imines in aq. solutions?


I've been finding a ton of conflicting information on this topic regarding monomethylations and dimethylations.

Some people have insisted that the formaldehyde imine is not easily reversible in water and tolerates a wide range of PH's, allowing for an indirect monomethylation without the risk of dimethylation caused by reverse-formation of the imine. A sign for this being the noticeably exothermic reaction that happens when aq. formaldehyde is added to alkyl amines.

Alternatively there was a study(attached below) involving the mono- and di- methylation of carboxylic acids using zinc/formaldehyde, that stated a mildly acidic phosphate buffer was needed to control monomethylation. Though some have suggested this is due to the resonance effects of the carboxylic acid that destabilizes the formaldehyde-imine.

The only papers on this topic I could find are the one attached below. There were many people on this forum throughout many threads claiming the aq. formaldehyde imine formation of alkyl amines is not easily reversible, often citing the Rhodium archives entry as a source, which doesn't help seeing as those entries are not notoriously detailed or accurate most of the time.

Can anyone provide insight into the stability dynamics of this formaldehyde imine in aq. solutions? What is it about the formaldehyde imine in aq. solutions that seems to lie to the right of the imine equilibrium?

Attachment: Zn_HCHO_methylation.pdf (98kB)
This file has been downloaded 342 times

View user's profile View All Posts By User
forgottenpassword
Hazard to Others
***




Posts: 374
Registered: 12-12-2013
Member Is Offline

Mood: No Mood

[*] posted on 5-5-2014 at 03:36


Usually a cosolvent is used when forming imines with aqueous formaldehyde. Methanol is best for stabilizing imines. If you are asking about the stability of an isolated imine in pure water, the answer will depend entirely upon the specific system being studied, rather than any general assumptions about 'imines'.

[Edited on 5-5-2014 by forgottenpassword]
View user's profile View All Posts By User
FireLion3
Hazard to Others
***




Posts: 218
Registered: 11-1-2014
Member Is Offline

Mood: No Mood

[*] posted on 5-5-2014 at 07:52


Does this happen due to the imines general solubility in organic solvents, causing it to be mostly separated from the aq. layer when the aldehyde attaches to the amine?

I have noticed there seems to be time given to allow for formaldehyde to react with the amine in the solution before, ~15-30 minutes, before attempting to reduce the imine.
View user's profile View All Posts By User
Nicodem
Super Moderator
*******




Posts: 4230
Registered: 28-12-2004
Member Is Offline

Mood: No Mood

[*] posted on 6-5-2014 at 06:19


Ammonia and amines do not form imines with formaldehyde. The product with ammonia is hexamine, which is stable toward hydrolysis in basic, neutral and up to fairly acidic media. The primary amines give the corresponding 1,3,5-trialkylhexahydro-s-triazines. Secondary amines initially get N-hydroxymethylated and yield 1,1-bis(dialkylamino)methanes as the final products.
All these do form trough transient imines and iminiums which are nevertheless not the reaction products. You would better review the literature instead of asking such a wide and undefined questions. Like forgottenpassword said, the answer depends on the specific reaction system and conditions.




…there is a human touch of the cultist “believer” in every theorist that he must struggle against as being unworthy of the scientist. Some of the greatest men of science have publicly repudiated a theory which earlier they hotly defended. In this lies their scientific temper, not in the scientific defense of the theory. - Weston La Barre (Ghost Dance, 1972)

Read the The ScienceMadness Guidelines!
View user's profile View All Posts By User
FireLion3
Hazard to Others
***




Posts: 218
Registered: 11-1-2014
Member Is Offline

Mood: No Mood

[*] posted on 6-5-2014 at 19:13


See, that is a very interesting piece of information. Out of all the pages I looked at regarding the reaction of formaldehyde with primary amines there was not any mention of any formed triazines. All of them seem to declare it as simple as:
Code:
Amine + Formaldehyde -> H2O + Imine ---reduce---> Secondary Amine


No sources I have encountered have made any sort of statement regarding intermediate triazines in this process. And these are stable in aqueous solutions?

Nicodem, what would be the structure of something like that, "1,3,5-trialkylhexahydro-s-triazines"? Cross reference searching formaldehyde, primary amines, and/or triazines does not yield any results other than unrelated excerpts from various sources. I hope I can get a visual idea of how this structure is formed, and then hydrogenated to the secondary amine.


Edited:

Been looking into these triazines, interesting. Was taking a look at how ammonia forms to hexamine..... is the formaldehyde-triazine molecule formed between 3 molecules of the amine? If so, this sounds like it could pretty badly distort chirality, yet, for instance in the Eschweiler–Clarke reaction amines do not racemize during this sort of interaction/reduction with formaldehyde.


[Edited on 7-5-2014 by FireLion3]
View user's profile View All Posts By User

  Go To Top