trevasotilo
Harmless
Posts: 1
Registered: 25-11-2013
Member Is Offline
Mood: No Mood
|
|
Quick Sulfuric acid question
Sulfuric acid can be produced in the laboratory by burning sulfur in air and dissolving the gas produced in a hydrogen peroxide solution.
SO2 + H2O2 → H2SO4
The above is wrong right?
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
The equation is balanced, and I believe the oxidation will take place, at least to some extent:
http://www.fmcchemicals.com/Portals/chem/Content/Docs/H2O2%2...
Article on oxidation in the gas phase:
https://www.sciencedirect.com/science/article/pii/0004698181...
|
|
Galinstan
Hazard to Self
Posts: 53
Registered: 22-11-2013
Location: England
Member Is Offline
Mood: No Mood
|
|
no, im fairly sure the equation is correct as the oxidation numbers for all the elements involved balance
Also this should probably be in beginnings
[Edited on 25-11-13 by Galinstan]
|
|
blargish
Hazard to Others
Posts: 166
Registered: 25-9-2013
Location: Canada
Member Is Offline
Mood: Mode Push
|
|
Your equation for the reaction is correct. Nitric acid can also be used instead of hydrogen peroxide, and it has the added benefit of giving an
indicator when it has all been used up/reduced (no more NO2 gas is evolved). You can then swap out for more nitric acid and have a very
efficient synthesis. When using peroxide, you have no such indicator when all of the peroxide has been reduced. Still, peroxide is much easier to come
by than nitric acid...
|
|
bfesser
|
Thread Moved 25-11-2013 at 10:56 |
TheChemiKid
Hazard to Others
Posts: 493
Registered: 5-8-2013
Location: ̿̿ ̿̿ ̿'̿'̵͇̿̿з=༼ ▀̿̿Ĺ̯̿̿▀̿ ̿ ༽
Member Is Offline
Mood: No Mood
|
|
Here is a nurdrage video on this subject. It i svery well made and relies on this principle.
My advice: If you can, use nitric acid instead of hydrogen peroxide.
When the police come
\( * O * )/ ̿̿ ̿̿ ̿'̿'̵͇̿̿з=༼ ▀̿̿Ĺ̯̿̿▀̿ ̿ ༽
|
|