golfpro
Banned
Posts: 179
Registered: 18-5-2013
Member Is Offline
Mood: Cap Sensitive
|
|
Silver Nitrate crystallization from water
Today I made AgNO3 from a 3 gram or so chunck of silver, I ended up with the silver nitrate crystals sitting in the nitric acid, what I did next was a
bit stupid but I did this reaction in a 50ml erlenmeyer as that's what I was limited to, I added enough water up to the neck to dissolve all of the
silver nitrate and it looks milky and even a bit yellowish now, it is 65ml in a 250ml beaker sitting in the garage now, will this water evaporate
eventually leaving me with Pure Silver Nitrate? I have crystalized AN from water just like this with the use of a flat cookie sheet and heat to speed
up evaporation, but I don't know if I want to wait 3-7 days for the water to evaporate, I may get this into a clean flat glass pan and let this sit in
darkness??
I have heard AgNO3 is light sensitive.
|
|
|
Ascaridole
Hazard to Self
Posts: 67
Registered: 11-9-2013
Location: Hawaii, USA
Member Is Offline
Mood: Searching for glass....
|
|
The yellow isn't a bad thing, it could be lingering NO2. The concerning part is the milky white solution... 3g of Ag = .0029mol and that corresponds
to about 4.7g of AgNO3, according to wikipedia (i know bad source but thats all i have right now...Ill look in the CRC when I get home) at 0ºC
1220g/L of AgNO3 should dissolve. At 50mL you should be able to dissolve about 61g of the nitrate salt. This leads me to believe you may have had
impurities such as chloride or something in your water or on the walls of your flask.
As for the light sensitivity it is sensitive but not as bad as silver bromide or chloride. I wouldn't leave it out in the sun if thats what your
asking.
As for purity thats questionable. You may need to filter to get a clear solution and let the clear solution evaporate.
|
|
|
golfpro
Banned
Posts: 179
Registered: 18-5-2013
Member Is Offline
Mood: Cap Sensitive
|
|
That was what I thought, a bit of NO2, it smells like NO2/chlorine. Milky is a bad word to decribe it, it's yellowish and a tad foggy, but I don't
care if it's absolutely pure for the context for which it will be used.
|
|
|
golfpro
Banned
Posts: 179
Registered: 18-5-2013
Member Is Offline
Mood: Cap Sensitive
|
|
I made a stupid mistake of pouring the AgNO3 solution onto a metal cookie sheet forgetting it was very acidic from leftover HNO3 or HNO2 (don't know
how much of this really forms) I was doing this to dry is and it started to eat away at the coating on the cookie sheet so I took it out and now have
a brown liquid . I'll let it sit to see if they separate but besides the color, it also smells heavily of NO2, whether it is that or the crap from the
cookie sheet, I don't know but I'll see what it looks like when it dries.
|
|
|
cyanureeves
National Hazard
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
what ever does not crystallize can easily be turned back to silver chloride which is what i do when i am sure i've been cheated of silver nitrate.i
swear our tap water is so chlorinated it can find out silver nitrate wherever it's present.
|
|
|
Pyro
International Hazard
Posts: 1305
Registered: 6-4-2012
Location: Gent, Belgium
Member Is Offline
Mood: No Mood
|
|
silver nitrate is yellowish after production, especially if you heat it.
mine was yellow too and it cleared up in about a week and became white
all above information is intellectual property of Pyro.  |
|
|
Fantasma4500
International Hazard
Posts: 1681
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline
Mood: dangerously practical
|
|
the reason for that its milky (i believe this is what its usually referred to as anyways)
but why not just use your solution you have now, first let it settle with any ppt. then decant it and put some C2H2 through it (as i recall this is
your only business with this compound)
|
|
|
DraconicAcid
International Hazard
Posts: 4334
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Quote: Originally posted by golfpro  | | I made a stupid mistake of pouring the AgNO3 solution onto a metal cookie sheet forgetting it was very acidic from leftover HNO3 or HNO2 (don't know
how much of this really forms) I was doing this to dry is and it started to eat away at the coating on the cookie sheet so I took it out and now have
a brown liquid . I'll let it sit to see if they separate but besides the color, it also smells heavily of NO2, whether it is that or the crap from the
cookie sheet, I don't know but I'll see what it looks like when it dries. |
Even if the solution didn't have leftover nitric acid in it, aqueous silver nitrate will react with most metals in a single replacement reaction,
giving silver metal and some other metal nitrate. If the silver forms as fine particles, it will appear as a brown slime.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
golfpro
Banned
Posts: 179
Registered: 18-5-2013
Member Is Offline
Mood: Cap Sensitive
|
|
Dumped this crap out and I'll just start over
|
|
|
Fantasma4500
International Hazard
Posts: 1681
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline
Mood: dangerously practical
|
|
lol man you just threw 4.5g silver nitrate down the drain?
|
|
|
phlogiston
International Hazard
Posts: 1379
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
Did you use tap water? If so, next time use use distilled or demineralized water.
The 'milkyness' is a very fine precipitate of insoluble silver salts that are caused by the carbonate/chloride/other impurities typically present in
tap water. (incidentally, you see similar milky precipitates when mixing tap water with solutions of soluble lead salts).
It is generally best to use only glass and plastics (although plastics may leach plastizicers/UV stabilizers/pigments/etc).
PS. You could have easily recovered/purified the silver nitrate: (1) Filter to get a clear solution, (2) precipitate silver chloride by adding a
concentrated solution of sodium chloride (3) recover AgCl by settling or filtering (3) wash with water a few times (4) add sodium hydroxide to convert
to Ag<sub>2</sub>O (5) wash with water (6) redissolve in nitric acid.
[Edited on 13-9-2013 by phlogiston]
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
