Random
International Hazard
Posts: 1120
Registered: 7-5-2010
Location: In ur closet
Member Is Offline
Mood: Energetic
|
|
Soluble Manganese (II) salts from battery MnO2 w/ metabisulfite
I have read somewhere a way to reduce MnO2 using metabisulfite, but it also included NaHSO4 which I don't have, neither I do have sulfuric acid. I
guess acidic conditions must be present for the reaction to proceed?
I have tried mixing just metabisulfite with washed MnO2 and obtained a small amount of white powder on mixing with NaHCO3 solution. I am not sure if
it was so small amount because of small amount of MnO2 used or I haven't met the reaction conditions.
Anyone knows what is NaHSO4 used in the reaction along with metabisulfite? Any substitutes?
|
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
NaHSO4 is used to dissolve the reduced manganese, any acid that doesn't react with manganese dioxide directly should work.
I never asked for this.
|
|
|
Random
International Hazard
Posts: 1120
Registered: 7-5-2010
Location: In ur closet
Member Is Offline
Mood: Energetic
|
|
Do you mean reduced manganese as in manganese (II) sulfite? I heard transition metal sulfites are quite insoluble. So adding acetic acid to this would
work? Or would it be too weak?
Should I first add metabisulfite then after a while add the acid?
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
Yet you don't provide a reference?
Come on, you're not new here, you should know better than that.
[edit] <strong><a href="forumdisplay.php?fid=12">Beginnings</a></strong> is not meant to be a forum to default to when you're
feeling too <a href="http://lmgtfy.com/?q=manganese+metabisulfite&l=1" target="_blank">lazy</a> <img src="../scipics/_ext.png"
/> to cite references or do your own research. Please don't use it in this way.
[Edited on 11.8.13 by bfesser]
|
|
|
Random
International Hazard
Posts: 1120
Registered: 7-5-2010
Location: In ur closet
Member Is Offline
Mood: Energetic
|
|
I would gladly provide the reference, but all I remember that I have seen it on versuchschemie.net. I can't find it no matter how much I have been
searching though. Not speaking german fluently doesn't help either.
On topic, I have washed MnO2 from batteries and dissolved metabisulfite in vinegar and another test tube was filled with water. To both test tubes I
added MnO2.
Test tubes cooled after the solvent addition and then became warm again. I guess it was just metabisulfite dissolving.
I'll try to filter both solutions then compare results with NaHCO3(aq). Btw, I have noticed that there is still I assume most of the MnO2 on the
bottom of the test tubes.
|
|
|
bfesser
Resident Wikipedian
Posts: 2114
Registered: 29-1-2008
Member Is Offline
Mood: No Mood
|
|
<strong>Random</strong>, I've been unable to find it on versuchschemie.de (my German is rusty, and never was great to begin with). I'll
keep looking around, and will report back if I find anything of interest.
<a href="http://lanthanumkchemistry.over-blog.com/article-manganese-dioxide-dissolution-103233590.html"> | Quote: | | Manganese dioxide from an alkaline battery or a carbon-zinc battery is more problematic. In these, large quantities of iron impurities are generally
present, which can be difficult to extract. Occasionally, you may find a battery that happens to be free of iron impurities. If so, a colorless
solution will be formed upon heating the manganese dioxide with hydrochloric acid. Otherwise, a dirt brown solution will form. This may be remedied by
dissolving the manganese dioxide in sodium metabisulfite solution. The sulfite will reduce the manganese(IV) to soluble manganese(II), while the
iron(III) remains untouched. <img src="../scipics/_ext.png" /> |
</a>
[Edited on 14.8.13 by bfesser]
|
|
|
woelen
Super Administrator
Posts: 8014
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Quote: Originally posted by Random  | I have read somewhere a way to reduce MnO2 using metabisulfite, but it also included NaHSO4 which I don't have, neither I do have sulfuric acid. I
guess acidic conditions must be present for the reaction to proceed?
I have tried mixing just metabisulfite with washed MnO2 and obtained a small amount of white powder on mixing with NaHCO3 solution. I am not sure if
it was so small amount because of small amount of MnO2 used or I haven't met the reaction conditions.
Anyone knows what is NaHSO4 used in the reaction along with metabisulfite? Any substitutes? |
Have a look at the half reactions and then you understand why acid is needed:
MnO2 + 2e + 4H(+) ---> Mn(2+) + 2H2O
The half reaction for metabisulfite is:
S2O5(2-) + 3H2O --> 2SO4(2-) + 6H(+) + 4e
Combine both reactions, such that the number of electrons is the same on both sides. This can be done by taking the first reaction twice and the
second reaction once:
2MnO2 + 4e + 8H(+) + S2O5(2-) + 3H2O --> 2Mn(2+) + 4H2O + 2SO4(2-) + 6H(+) + 4e
Simplifying:
2MnO2 + 2H(+) + S2O5(2-) --> 2Mn(2+) + H2O + 2SO4(2-)
As you can see, the net redox reaction consumes H(+) ions. That is the reason why you need to add acid to have this reaction running smoothly. Any
reasonably strong acid will do, you can use H2SO4, NaHSO4, HCl, HNO3.
|
|
|
bob800
Hazard to Others
Posts: 240
Registered: 28-7-2010
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Random | I would gladly provide the reference, but all I remember that I have seen it on versuchschemie.net. I can't find it no matter how much I have been
searching though. Not speaking german fluently doesn't help either.
|
Is this what you're referring to?: https://www.sciencemadness.org/whisper/viewthread.php?tid=14... I believe I saw the same or a similar post by Doktor Klawonn on
versuchschemie.
|
|
|
Fantasma4500
International Hazard
Posts: 1681
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline
Mood: dangerously practical
|
|
ive seen this done by an asian (sounding) guy, using NaHSO3 and NaHSO4 on MnO2, letting it stand overnight then react with NaHCO3 if i recall it
properly, i tried it myself..
35g MnO2
x0.625
25g NaHSO3
81.25 NaHSO4
96.875 Na2CO3
these numbers i still have in my 'chemistry' note for random stuff, that im spending time on
anyhow i had all of this stuff mixed up and SOMEHOW SUDDENLY THIS FUCKER decided to decompose into SO2
thats alot, like.. ALOT, before i got it into the bottle to bubble the SO2 through NaHCO3
my respect for SO2 was upped that day, but it will never reach the heights of SO3, although
by what i remember i did not find any results in the solution, no pink colour what so ever
i later tried H2SO4 98% and what not, described in NurdRage's video
talked to my teacher today about it, and he think we should do it in school someday with HCl, and said with HCl 30% might be too low conc.
im really having some immensive rage over MnO2 (:
but hey it must be beyond brilliant for anodes, if it can withstand 98% H2SO4 just like that
a very small scale test with 37% HCl and MnO2 could be done, whereafter neutralized with NaHCO3 to ppt. the MnCO3, as MnCO3 is very insoluble
(0.0003somethingsomethingsomething, http://en.wikipedia.org/wiki/Solubility_table)
i believe if you search MnO2 on youtube, find NurdRage's video on the H2SO4 method, the video with the asian sounding dude will be in responses,
something with MnCO3
|
|
|
The Volatile Chemist
International Hazard
Posts: 1981
Registered: 22-3-2014
Location: 'Stil' in the lab...
Member Is Offline
Mood: Copious
|
|
I hate to dredge this post up, but I wanted to ask if NaHSO4 and MnO2 will react without SO2 or other gas production?
Side note, MnO2 LOVES to rip oxygen from chemicals. I was able to decompose a dye with it and NaOCl to make benzene, among other things.
So is the reaction I mentioned safe?
|
|
|
bismuthate
National Hazard
Posts: 803
Registered: 28-9-2013
Location: the island of stability
Member Is Offline
Mood: self reacting
|
|
Generaly MnO2 and NaHSO4 will react in the presence of a reducing agent but they will not react with each other alone.
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by bfesser | <strong>Random</strong>, I've been unable to find it on versuchschemie.de (my German is rusty, and never was great to begin with). I'll
keep looking around, and will report back if I find anything of interest.
|
There are more threads on MnO2/Mn(II) from battery gunge on SM than on anything else. Every conceivable reducing agent has already been discussed. And
yet more threads are opened up...
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
