Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Using old lab chemicals
BrewCityPolska
Harmless
*




Posts: 1
Registered: 24-6-2013
Member Is Offline

Mood: No Mood

[*] posted on 25-6-2013 at 10:23
Using old lab chemicals


I recently obtained some old reagents and was wondering if they are still okay to use? Any recommendations or info would be greatly appreciated! Here is what I have.....

DuPont - 2.5L Ammonium Hydroxide ACS 30% (full)
Mallinckrodt - 2.5L Ammonium Hydroxide ACS 58% (3/4 full)
DuPont - 2.5L con Sulfuric Acid ACS (full)
Baker Adamson (B&A) - 2.5L con Sulfuric Acid ACS (full)



*All these bottles are from the 1960's and have been properly stored for their entire life to the best of my knowledge.

*I also am properly storing these bottles in two separate cabinets in a cool, dark, dry place.
View user's profile View All Posts By User
DraconicAcid
International Hazard
*****




Posts: 4334
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline

Mood: Semi-victorious.

[*] posted on 25-6-2013 at 10:45


They should be fine. Some of the ammonia may have evaporated, leaving a less concentrated solution, but I don't think it would have "gone bad".



Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
View user's profile View All Posts By User
woelen
Super Administrator
*********




Posts: 8014
Registered: 20-8-2005
Location: Netherlands
Member Is Offline

Mood: interested

[*] posted on 25-6-2013 at 10:56


Yes, they will be fine, even after tens of years of storage, provided the bottles are well sealed and the caps are in good condition.

The ammonia 58% probably will be 28%. The maximum concentration of ammonia is just over 30% at room temperature, higher concentrations are not possible without extreme pressure buildup.




The art of wondering makes life worth living...
Want to wonder? Look at https://woelen.homescience.net
View user's profile Visit user's homepage View All Posts By User
Endimion17
International Hazard
*****




Posts: 1468
Registered: 17-7-2011
Location: shores of a solar sea
Member Is Offline

Mood: speeding through time at the rate of 1 second per second

[*] posted on 25-6-2013 at 23:42


If the bottles are made of glass and there's PTFE lining under the caps, they're pretty much fine. Their contents don't match the specified label anymore, but they're not contaminated. There might be some glass dissolved in it, though. After all, it's more than 50 years of storage.



View user's profile Visit user's homepage View All Posts By User

  Go To Top