DougTheMapper
Hazard to Others
Posts: 145
Registered: 20-7-2008
Location: Michigan, USA
Member Is Offline
Mood: Energetic
|
|
Explosives and Entropy
Hi everyone. I've been wondering about something silly lately that maybe someone can answer for me...
Why does modern explosives research move toward compounds with more nitrogen atoms?
If one examines the heat of formation of compounds, we know that species containing only one type of atom have no enthalpy of formation, N2 for
example. In terms of pressure generated, nitrogen has a little over half the molar mass of carbon dioxide; however, the huge amount of energy released
when CO2 is formed should easily make CO2 the preferential reaction product in terms of pressure. Is this because CO2 is more easily
liquefied/solidified under high pressure, and it's the difference in vapor pressure that makes explosives containing N2 more brisant rather than
outright energetic? What about explosives designed to form H2 instead? I would expect hydrogen to have a much higher vapor pressure, and its low
density would only serve to increase pressure.
So why is there so much hype over maximizing nitrogen? Theoretically, wouldn't an all-nitrogen compound only absorb energy on its solid-gas
conversion, except for maybe bond strain or something?
Clearly I am missing something because these compounds are thought to be extremely energetic. Can anyone point me in the right direction?
Thanks,
DTM
Victor Grignard is a methylated spirit.
|
|
|
plante1999
International Hazard
Posts: 1936
Registered: 27-12-2010
Member Is Offline
Mood: Mad as a hatter
|
|
nitrogen in compound, upon combinaison with another nitrogen generate a very good deal of energy because of triple bond formation.
I never asked for this.
|
|
|
DraconicAcid
International Hazard
Posts: 4334
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Quote: Originally posted by DougTheMapper  |
If one examines the heat of formation of compounds, we know that species containing only one type of atom have no enthalpy of formation, N2 for
example. |
Here's your mistake. N2(g) has an enthalpy of formation of zero, because N2(g) is the standard state of nitrogen (and enthalpy
of formation is defined as the molar enthalpy change for the formation of a substance from the elements in their standard states. The enthalpy change
for N2(g) sitting around and staying as itself is obviously zero by definition). Other substances that contain only nitrogen do not have
formation enthalpies of zero- N(g) has an enthalpy of formation of 472.7 kJ/mol (according to the appendix of Petrucci's General Chemistry).
N2(l) and N2(s) will also have non-zero formation enthalpies (differing from zero by the enthalpies of vaporization and
sublimation).
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
phlogiston
International Hazard
Posts: 1379
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
Energy is only part of the story, as you found out. Burning a mole of gasoline yields more energy than burning a mole of TNT.
The energy has to be released quickly. In chemical terms: you want the decomposition of explosives to have a low activation energy. Explosives tend to
have one or more bonds that are easily broken upon heating or when subjected to mechanical shock.
N-N and N-O bonds have such a low energy of dissociation.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
Eddygp
National Hazard
Posts: 858
Registered: 31-3-2012
Location: University of York, UK
Member Is Offline
Mood: Organometallic
|
|
The triple bond of the N2 releases a great quantity of energy but in a very fast way, which is what is wanted in explosives. Nitrogen triiodide,
sodium azide, silver fulminate, TNT, nitroglycerin, etc. all contain nitrogen because it forms N2, and that change is very rapid and "fierce".
there may be bugs in gfind
[ˌɛdidʒiˈpiː] IPA pronunciation for my Username |
|
|
GreenD
National Hazard
Posts: 623
Registered: 30-3-2011
Member Is Offline
Mood: Not really high anymore
|
|
maybe off topic but a couple years ago my head researcher told me that there is a ratio of
N+Cl+O : C
That above 1.5 in a given compound usually means its explosive. While something like 2 is dangerous, and something like 3 is don't touch/don't
synthesize it.
Is this just a rule of thumb, or is there a way to actually calculate such a ratio for "explosiveness"?
ʃ Ψ*Ψ
Keepin' it real.
Check out my new collaborated site: MNMLimpact.com
|
|
|
franklyn
International Hazard
Posts: 3026
Registered: 30-5-2006
Location: Da Big Apple
Member Is Offline
Mood: No Mood
|
|
The interest in high nitrogen content compounds is because they are
highly endothermic and have comparatively greater density than high
carbon content based compounds. Many are unreactive , reasonably
stable and relatively insensitive materials. The end of the line has been
attained with Nitro carbons and they have been found wanting in these
desired properties. Hydrogen is effective as a detonation product but
requires combustion of elemental Aluminum or Boron to be formed
uncombined with oxygen. The products of detonation are ceramic
powders that generate higher energy and temperature but are not gas
so the performance is overall quite less and disappointing in every
respect except only if high blast effect is desired.
There is computer simulation of prospective compounds , but selection
of candidates remains an art directed by intuition founded on experience.
I don't know that there is a general method for establishing the explosive
character of an arbitrarily chosen compound. The literature most relevant
in this regard cautions safety for the handling of uninvestigated materials
of a known type or family such as peroxides. The known explosophores
( functional groups characteristically exhibiting explosivness ) are more prone
to explosion the less negative the oxygen balance becomes. Compounds
that are highly endothermic generally exhibit more pronounced explosive
character with increasing atomic weight. The nitrogen halides are an example.
www.sciencemadness.org/talk/viewthread.php?tid=14005#pid1802...
.
|
|
|
vmelkon
National Hazard
Posts: 669
Registered: 25-11-2011
Location: Canada
Member Is Offline
Mood: autoerotic asphyxiation
|
|
An interesting compound that is explosive and doesn't contain nitrogen is copper acetylide. It forms with copper and ethyne under pressure. It
explodes violently and only produces solids : copper powder and carbon powder. This reaction has destroyed a few ethyne producing factories in the
past.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
