Funkerman23
Hazard to Others
Posts: 416
Registered: 4-1-2012
Location: Dixie
Member Is Offline
Mood: No Mood
|
|
amateur cannula sources?
I may catch it this time but I know I can't be the only one having issues. Laboy when they had the old site stocked cannula as well as all the other
needed air free parts. Well the new site has cleared up a lot of issues and did away with a lot of multiple listings( as well as a few niche adapters
but I digress) but it looks like they no longer stock or sell stainless steel cannulas. The big guys as usual won't sell to us but does anyone out
there have a source or know where to get cannulas?
" the Modern Chemist is inundated with literature"-Unknown
|
|
|
BromicAcid
International Hazard
Posts: 3247
Registered: 13-7-2003
Location: Wisconsin
Member Is Online
Mood: Rock n' Roll
|
|
You can make a transfer needle using OTC poly tubing and two needles using zip ties to lock the needles in place. Issue is of course inertness of the
tubing you can find. The tubing used at the Aldrich website for this is Chem-Flex which has an inner sheath of PTFE:
http://www.sigmaaldrich.com/catalog/product/aldrich/z231029
Not as good as a single piece SS cannula but easier to improvise.
|
|
|
Eddygp
National Hazard
Posts: 858
Registered: 31-3-2012
Location: University of York, UK
Member Is Offline
Mood: Organometallic
|
|
Sigma-Aldrich is quite expensive... I've checked many other common products and well-known reagents at a normal purity and they aren't cheap.
Furthermore, AFAIK they don't sell to individuals.
[Edited on 1-5-2013 by Eddygp]
there may be bugs in gfind
[ˌɛdidʒiˈpiː] IPA pronunciation for my Username |
|
|
Lambda-Eyde
National Hazard
Posts: 860
Registered: 20-11-2008
Location: Norway
Member Is Offline
Mood: Cleaved
|
|
Have you asked Laboy if they still stock cannulas and related equipment?
This just in: 95,5 % of the world population lives outside the USA
Please drop by our IRC channel: #sciencemadness @ irc.efnet.org
|
|
|
Funkerman23
Hazard to Others
Posts: 416
Registered: 4-1-2012
Location: Dixie
Member Is Offline
Mood: No Mood
|
|
As of writing this the stock
Schlenk flasks& tubes, manifolds, Rubber septa, bubblers, and "solvent retrieval " syringe needles and they claim their inlet/thermometer adapters
can be used as a syringe port but they don't stock the rubber disks to use them as such last time I checked. waiting on a reply from them on that
matter.
" the Modern Chemist is inundated with literature"-Unknown
|
|
|
BromicAcid
International Hazard
Posts: 3247
Registered: 13-7-2003
Location: Wisconsin
Member Is Online
Mood: Rock n' Roll
|
|
Quote: Originally posted by Eddygp  | Sigma-Aldrich is quite expensive... I've checked many other common products and well-known reagents at a normal purity and they aren't cheap.
Furthermore, AFAIK they don't sell to individuals.
[Edited on 1-5-2013 by Eddygp] |
Indeed, I only linked though to show an example of what I was talking about. One can simply buy 'flavor injector' needles and fit them together with
a length of tubing to make a makeshift cannula.
|
|
|
Mercedesbenzene
Hazard to Self
Posts: 64
Registered: 4-9-2011
Location: BC
Member Is Offline
Mood: Sub Zero
|
|
I had this problem as well but I found a great solution for it. Go to amazon or ebay and buy some stainless steel tubing, around 15 guage works well.
Depending on how long the piece is cut it to the desired size. Then take those pieces and some kind of cylinder and wrap it around to bend it into a U
shape as the tubing is usually more ridgid than a regular cannula so it needs to be pre bent. Then you can sharpen on side of the piece to a point so
it can pierce septums better, but this is optional. I have made a couple of these, they are very cheap and work like a charm.
http://www.amazon.com/Stainless-Hypodermic-Tubing-0-0055-Len...
I think I used this particular pipe.
[Edited on 2-5-2013 by Mercedesbenzene]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
