binaryclock
Hazard to Others
Posts: 121
Registered: 9-4-2013
Location: Canada
Member Is Offline
Mood: Organic
|
|
Copper sulfate
Hello I'm trying to get my hands on Copper Sulfate to create zinc sulfate. However the only root killer I can find in the stores around me are made
up of Copper (II) sulfate pentahydrate. Can I use this to create zinc sulfate using this method?
http://www.instructables.com/id/How-to-make-Zinc-sulfate-and...
If not, where can I find a good source of copper or zinc sulfate? Any ideas of off-the-shelf products that I can look for?
Thanks
[Edited on 10-4-2013 by binaryclock]
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
The pentahydrate is what you want. Pentahydrate simply means there are 5 water molecules for each CuSO4 molecule in the crystal. You're dissolving it
in water anyway, so it makes no difference. You do, however, have to take the crystal water into account when doing your stoichiometry.
|
|
|
binaryclock
Hazard to Others
Posts: 121
Registered: 9-4-2013
Location: Canada
Member Is Offline
Mood: Organic
|
|
Thank you sir. There's a lot to learn in this great hobby and even more great people willing to help people out.
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
A neat experiment is to powder some hydrated (blue) copper sulfate, put it in a test tube, and heat it strongly. It loses all its water molecules at
200C and transforms into a white powder. After cooling, adding a little water immediately makes it go blue again. On my Youtube channel I dehydrated a
large single crystal using conc. sulfuric acid, and eventually it crumbled into powder!
|
|
|
elementcollector1
International Hazard
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Quote: Originally posted by MrHomeScientist  | | A neat experiment is to powder some hydrated (blue) copper sulfate, put it in a test tube, and heat it strongly. It loses all its water molecules at
200C and transforms into a white powder. After cooling, adding a little water immediately makes it go blue again. On my Youtube channel I dehydrated a
large single crystal using conc. sulfuric acid, and eventually it crumbled into powder! |
I saw that. 
I would do the same with mine, but I have yet to grow a large crystal. I'm assuming that dissolving the CuSO4 in the minimum amount of water at 100 C
and cooling slowly, such as in Styrofoam insulation, would work?
Still, I might just keep the crystal - copper crystals show up strangely often in the "Pretty Pictures" thread.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
They are gorgeous crystals definitely, I love their deep blue color. It was a bit of a shame to destroy one, but it was a neat experiment  The way I made mine was making a saturated room temperature solution and letting it
slowly evaporate over a few months. A bunch of tiny crystals form first, so I picked out a few good looking ones and swept out the rest. Whenever new
small crystals would form I'd move them out of the way before they ran into my nice big ones. That's something I need to make a video on, it's been
requested a few times. Slow cooling of a heated solution in a well-insulated box would be much faster, but somewhat less controllable!
|
|
|
cyanureeves
National Hazard
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
you can make lead acetate this way also if you use vinegar instead of water and lead in place of zinc.plante showed me this method which is pretty
fast too and both solution turn clear alike also.
|
|
|
annaandherdad
Hazard to Others
Posts: 387
Registered: 17-9-2011
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by MrHomeScientist | | They are gorgeous crystals definitely, I love their deep blue color. It was a bit of a shame to destroy one, but it was a neat experiment The way I made mine was making a saturated room temperature solution and letting it
slowly evaporate over a few months. A bunch of tiny crystals form first, so I picked out a few good looking ones and swept out the rest. Whenever new
small crystals would form I'd move them out of the way before they ran into my nice big ones. That's something I need to make a video on, it's been
requested a few times. Slow cooling of a heated solution in a well-insulated box would be much faster, but somewhat less controllable! |
This is very interesting. How did you remove the small crystals? With tweezers? Won't the metal react with the CuSO4? Thanks...
Any other SF Bay chemists?
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
Nah I just swept them aside with a plastic spoon. There's so many tiny crystals that picking them out one by one would take forever. I kept my bigger
crystals in the center of the dish and just scraped the little ones out of the way before they ran into each other. If there is too much extra buildup
you could always transfer your good crystals into another container and filter the solution over to that one. If your liquid level gets too low, make
another saturated solution with your "waste" crystals and pour that in as well.
Make sure any solution you add is saturated though! In my experiment, my crystals actually shrunk a few times because the extra
liquid I added wasn't quite saturated enough.
|
|
|
annaandherdad
Hazard to Others
Posts: 387
Registered: 17-9-2011
Member Is Offline
Mood: No Mood
|
|
Thanks, I'll try that. As for always adding a saturated solution, a wild card in the case of copper sulfate is the temperature. Saturated at one
temperature is unsaturated (maybe greatly so) at a higher temperature.
I've enjoyed your videos, btw.
Any other SF Bay chemists?
|
|
|
Bot0nist
International Hazard
Posts: 1559
Registered: 15-2-2011
Location: Right behind you.
Member Is Offline
Mood: Streching my cotyledons.
|
|
My beautiful pentahydrate crystals on a copper pipe. More pics and a brief write up in the "Pretty Pictures" thread.
http://www.sciencemadness.org/talk/viewthread.php?tid=14644&...
I know, I have no shame... 
U.T.F.S.E. and learn the joys of autodidacticism!
Don't judge each day only by the harvest you reap, but also by the seeds you sow.
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by annaandherdad | Thanks, I'll try that. As for always adding a saturated solution, a wild card in the case of copper sulfate is the temperature. Saturated at one
temperature is unsaturated (maybe greatly so) at a higher temperature.
I've enjoyed your videos, btw. |
That's true for any chemical's solubility, but yes particularly so for copper sulfate. It's almost 7x more soluble at 100C than at 0C!
Another thing to keep in mind for CuSO4 crystal growing is that when first dissolving your commercial-grade stuff (assuming you got root killer like I
did), you'll want to filter off any insolubles. I find that usually some copper carbonate is in these OTC samples.
Pretty crystals Bot0nist! I've seen some people use rocks as substrates, too. Also If anyone hasn't seen this yet, someone made an art installation by
filling an apartment with 75,000 liters of CuSO4 solution to coat everything in crystals. Really amazing: http://www.artangel.org.uk/projects/2008/seizure
Not too many pictures of it, unfortunately. Found that in one of the references on the wiki page for CuSO4.
|
|
|
Bot0nist
International Hazard
Posts: 1559
Registered: 15-2-2011
Location: Right behind you.
Member Is Offline
Mood: Streching my cotyledons.
|
|
Thank. Those formed on the pipe after it reacted with the H<sub>2</sub>O<sub>2</sub> /
H<sub>2</sub>SO<sub>4</sub> mix it was formed in.
[Edited on 21-5-2013 by Bot0nist]
U.T.F.S.E. and learn the joys of autodidacticism!
Don't judge each day only by the harvest you reap, but also by the seeds you sow.
|
|
|
Eddygp
National Hazard
Posts: 858
Registered: 31-3-2012
Location: University of York, UK
Member Is Offline
Mood: Organometallic
|
|
To make CuSO4 crystals, I usually cling a seed crystal on a wire and let it hang in a saturated (sometimes super-saturated) solution of CuSO4. I've
got enormous crystals like that, around five or six times larger than Bot0nist's. Not trying to brag about myself...
there may be bugs in gfind
[ˌɛdidʒiˈpiː] IPA pronunciation for my Username |
|
|
LanthanumK
Hazard to Others
Posts: 298
Registered: 20-5-2011
Location: New Jersey
Member Is Offline
Mood: No Mood
|
|
If you want zinc sulfate, there are some moss killers available that contain almost pure zinc sulfate. It may be cheaper and easier than buying copper
sulfate, performing the reaction, and purifying the product.
hibernating...
|
|
|
Godspeed429
Harmless
Posts: 11
Registered: 24-3-2013
Member Is Offline
Mood: +2
|
|
You can try to make yourself some zinc sulfate using zinc from pennies and battery acid.
I am currently doing this and so far it is going quiet well.
|
|
|
annaandherdad
Hazard to Others
Posts: 387
Registered: 17-9-2011
Member Is Offline
Mood: No Mood
|
|
A question about crystalization, for anyone: How do you keep crystals from crawling up the side of your container and down the outside, finally
creeping out onto the table the dish is setting on?
Any other SF Bay chemists?
|
|
|
binaryclock
Hazard to Others
Posts: 121
Registered: 9-4-2013
Location: Canada
Member Is Offline
Mood: Organic
|
|
I ended up purifying copper(ii) sulfate from root killer by recrystalization. Then making a saturated solution of CuSO4 in H2O and then adding Zn to
create ZuSO4.
Current Project: Playing with my new Laboy advanced distillery kit!
|
|
|
Bot0nist
International Hazard
Posts: 1559
Registered: 15-2-2011
Location: Right behind you.
Member Is Offline
Mood: Streching my cotyledons.
|
|
| Quote: Originally posted by annaandherdad | | A question about crystalization, for anyone: How do you keep crystals from crawling up the side of your container and down the outside, finally
creeping out onto the table the dish is setting on? |
That would make a cool picture... Its known as evaporative creep, and it can be annoying. When I recrystallize my copper sulfate I make a saturated,
boiling solution and then place that beaker in a pre heated thermos and then set it in the fridge. The slow cooling from >100C to <15C overnight
makes nice, large crystals without the need to evaporate down the solution much.
[Edited on 22-5-2013 by Bot0nist]
U.T.F.S.E. and learn the joys of autodidacticism!
Don't judge each day only by the harvest you reap, but also by the seeds you sow.
|
|
|
annaandherdad
Hazard to Others
Posts: 387
Registered: 17-9-2011
Member Is Offline
Mood: No Mood
|
|
Thanks, botonist, having a name for it allowed me to search. I found only three links, all of them on sciencemadness, one of them this one, then
another, then a third that Chrome says is infected with malware from darkobulatovic.com. That leaves the second one, which says that you can stop
the creep with vaseline. It also says dust landing on the surface of the liquid can seed crystals there, which starts the creep. It is indeed
annoying, and I've noticed that sometimes I have it and sometimes I don't.
I have noticed that I seem to have this problem more when I used petri dishes for evaporating, instead of the usual (rounded bottom) evaporating
dishes. So I was wondering if there was something special about evaporating dishes that prevent this.
Any other SF Bay chemists?
|
|
|
Varmint
Hazard to Others
Posts: 264
Registered: 30-5-2013
Location: Near Atlanta, GA
Member Is Offline
Mood: No Mood
|
|
When I was much younger, I had a near-romance attraction to copper sulfate crystals. Untold hours experimenting.
As other mentioned, the room temp saturation with evaporation allows the best control and can lead to some really emormous crystals with suitable
care.
My biggest breakthrough was in controlling the evaporation under my terms.
I took a large glass jar with a nice plastic cover (hard to find back in the 1968-70 timeframe, most covers were still made of metal). I drilled two
holes sized for 3/32" aquarium style airline, and heated one to bend it to a gentle right angle with a curve so the air would swirl in the jar.
The second line was plumbed to a cotton-filled film canister with two holes, one the inlet, the second was the exhaust. This served to silence the
airflow as it was in my bedroom.
The air source was a cheap aquarium air pump, the quietest I could find. It had a factory air filter pad, but this tended to become saturated with
airborne dust and would, presumably with the aid of the ever present vibration, eventually start to dump dust into the airstream.
My solution was another film canister filled with cotton, this one had two holes as well, one the inlet, the other plumbed to a fitting I made from a
bottle cap glued over the airpump intake port.
This would run for months at a time, perdiodically refreshing the solution with as close to the original saturation as possible and worked well
overall except for the inevitable temperature swings.
One day things would be going well, following a temperature drop you could see crystals getting started elsewhere, or worse, growing at some seed
point on the main crystal.
Only solution was to dilute the mother solution until the out of place crystal (and part of the main) was dissolved, setting me back days if not
weeks.
As the crystals got bigger (largest was over 1lb) I'd have to replentish the mother solution every other day, then daily, and eventually twice a day
before I got tired of the level of maintenence.
I wish I had pictures, but those were the days of film cameras, and I hadn't gotten involved in photography until some years after.
DAS
[Edited on 7-6-2013 by Varmint]
|
|
|
Cou
National Hazard
Posts: 958
Registered: 16-5-2013
Member Is Offline
Mood: Mad Scientist
|
|
I've seen big containers of copper sulfate pentahydrate in home depot and lowes for $13, it's called Zep root killer
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
