elementcollector1
International Hazard
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Ground glass stoppers
First, I have a 14/20 'adapter' of sorts which consists of a male joint, a short 2" glass tube, and a lip at the other end. I have no idea what it's
used for (I put them to work in all sorts of random applications), but it so happens that I have an extra. Is there any advice for making a good
stopper from this? I would imagine that by heating the glass up, taking hold of the top molten part with a good pair of pliers and twisting, the end
would seal itself much like how an ampoule is supposed to seal itself.
Second, how do you produce a stopper from scrap glass? Can I make a mold with clay, and melt some glass into that? How would I get a perfect stopper
from the joint?
This could prove useful for recycling instances of broken glass and such.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
|
Siggebo
Harmless
Posts: 23
Registered: 6-5-2012
Location: Sweden
Member Is Offline
Mood: Under reflux
|
|
One of these? In that case it's a tube adapter. I imagine the easiest way to make a stopper out of it would be to attach a short length of tube and
clamp it tight.
http://www.ctechglass.com/images/AD-0104b.jpg
[Edited on 2013-1-1 by Siggebo]
|
|
|
kavu
Hazard to Others
Posts: 207
Registered: 11-9-2011
Location: Scandinavia
Member Is Offline
Mood: To understand is to synthesize
|
|
Ground glass stoppers are rather tricky to make and require a lathe to get the taper correct. It's much easier to just buy stoppers online.
|
|
|
Endimion17
International Hazard
Posts: 1468
Registered: 17-7-2011
Location: shores of a solar sea
Member Is Offline
Mood: speeding through time at the rate of 1 second per second
|
|
Stoppers are made by robots. Rarely any flameworker makes them at workshop using a lathe.
Don't even bother. Just buy the damn things.
Happy New Year. 
|
|
|
smaerd
International Hazard
Posts: 1262
Registered: 23-1-2010
Member Is Offline
Mood: hmm...
|
|
You could buy a length of teflon rod. Use a sanding attachment on a drill-press to get the appropriate taper, hack-saw off a bit above the taper you
made and use that. I've had a similar issue with finding a 10/30 stopper at a reasonable price and that's what I plan to do, then again it's sensible
for me as I already have teflon rod sitting around.
|
|
|
elementcollector1
International Hazard
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
http://www.scilabware.com/Joints/Cones/Quickfit-cones/p-75-7...
More like these with a lip on the end...
[Edited on 1-1-2013 by elementcollector1]
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
|
TheChemINC
Hazard to Self
Posts: 61
Registered: 22-2-2012
Member Is Offline
Mood: fuming
|
|
maybe it is used as some sort of drying tube? or i have seen peices like that that have a little pouring spout on them so it is easier to pour liquids
out of the flask.
http://expediglass.com/ProductDetail.aspx?ProductIndex=71
although, your does have a longer neck.... but you could probably heat up on side of it until the glass is soft, and then using a very hot nail or
metal rod, form a little spout on it. i would think that hiving something like it would be very useful.
i hate when i pour things out of flasks and they run down the sides! 
|
|
|
kavu
Hazard to Others
Posts: 207
Registered: 11-9-2011
Location: Scandinavia
Member Is Offline
Mood: To understand is to synthesize
|
|
That kind of glassware is used by glass blowers when making custom apparatus or fixing broken ones. Long tube can be cut to derised length and melted
to glassware. Simple way of intoducing ground joints without too much hassel.
|
|
|
Texium
Administrator
Posts: 4583
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Does anybody have any extra ground glass stoppers that they'd be willing to sell or trade? I need a 29/42 stopper for this nice Pyrex storage bottle
that I have that has a ground glass opening, but didn't have a stopper with it when I got it. I'd also be interested in smaller stoppers for small
flasks, of sizes like 22, 19, 16, 13, and 9.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
