octaimelda
Harmless
Posts: 3
Registered: 22-4-2012
Member Is Offline
Mood: No Mood
|
|
NaOh or KOH
Which is have the larger solubility in organic solvent, NaOH or KOH?? Thank You, guys. hehe .
|
|
barley81
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 481
Registered: 9-5-2011
Member Is Offline
Mood: No Mood
|
|
KOH. It is more soluble in ethanol than NaOH, and its lower lattice energy should allow for higher solubility in other organic solvents.
|
|
octaimelda
Harmless
Posts: 3
Registered: 22-4-2012
Member Is Offline
Mood: No Mood
|
|
why?? is it have the relationship about its base or the bond with -OH??
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
From the point of view of alkalinity (the base) both NaOH and KOH are very similar. Equal molarity of solutions of these mean equal alkalinity (equal
pH). Both are strong bases.
Coordination of the OH(-) ion to the solvent also is the same for both compounds. So, the difference is not from any of the two things you mentioned.
It is the solid phase (NaOH vs. KOH) which makes the difference. In KOH, the ions K(+) and OH(-) are somewhat more loosely "connected" to each other
than Na(+) and OH(-) in NaOH and hence the solid more easily breaks up in its constituent ions.
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
A possible example of the more loose connected nature of KOH over NaOH (in which the Potassium salt appears to be preferred) is the creation of Cl2O
by treating an aqueous solution of Potassium hypochlorite with Chlorine:
1. Cl2 + KClO --H2O--> KCl + Cl2O
Source: "The Chemical Elements and their Compounds", by N.V. Sidgwich, Vol. 2, Page 1201 (in library).
I would note that:
2. KClO + H2O <----> KOH + HOCl
So, I think it is instructive to view the reaction as:
3. Cl2 + KOH + HOCl --> KCl + H2O + Cl2O
Apparently, under certain conditions, the reaction [1] has been cited to proceed in the opposite direction (implying reversible). To quote:
HOCl + KCl --> ‘’KOH’’ + Cl2
Cl2O + H2O --> 2HOCl
Source: http://enac2.epfl.ch/web/doctorants/2004/612.pdf
Note, in cold dilute solutions with excess NaOH, for example:
4. 2 NaOH + Cl2 = NaCl + NaOCl + H2O
(see, for example: https://docs.google.com/viewer?a=v&q=cache:vKvH-lo0mvkJ:... )
which is basically reaction [1] in which the Cl2O (or HOCl) has been neutralized.
For the record, preparation of Cl2O in the laboratory is most often cited via HgO, and commercially, paths proceed with Chlorine and steam acting on
NaOH or Na2CO3 or NaHCO3.
[Edited on 23-4-2012 by AJKOER]
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I see no relation to the rest of this thread. We are talking about dissolving solid KOH. What you are talking about are aqueous solutions and for such
it does not matter whether we have the sodium salt or the potassium salt. The reactions of the chlorine and the anionic species are the same,
regardless of the counterion being sodium or potassium.
|
|
cazruto
Harmless
Posts: 9
Registered: 24-4-2012
Location: Ulsan, Korea
Member Is Offline
Mood: reaserch
|
|
however KOH is good, i have one question i need dissolved KOH in organic solution but not use -OH group its problem for me please help me
Quote: Originally posted by woelen ![](images/xpblue/lastpost.gif) | From the point of view of alkalinity (the base) both NaOH and KOH are very similar. Equal molarity of solutions of these mean equal alkalinity (equal
pH). Both are strong bases.
Coordination of the OH(-) ion to the solvent also is the same for both compounds. So, the difference is not from any of the two things you mentioned.
It is the solid phase (NaOH vs. KOH) which makes the difference. In KOH, the ions K(+) and OH(-) are somewhat more loosely "connected" to each other
than Na(+) and OH(-) in NaOH and hence the solid more easily breaks up in its constituent ions. |
oololoo
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Please elaborate more on it. Your question is not clear. You want KOH dissolved, but do not want OH(-) ions?
|
|
DJF90
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2266
Registered: 15-12-2007
Location: At the bench
Member Is Offline
Mood: No Mood
|
|
I think he means KOH in a non-hydroxylic organic solvent. My suggestion is to use something like toluene and 18-crown-6 or TBAB. I use this routinely
and the hydroxide species under these unsolvated conditions has a pK of about 30 (rough estimate)
|
|