Chemgineer
Hazard to Others
Posts: 216
Registered: 25-5-2021
Member Is Offline
|
|
Petroleum fractions
So i've been distilling some non-polar solvents (~pentane & ~hexane?) from petrol, what i'm not sure of is what to do with the higher boiling
point fractions at around 100 deg C.
I could buy a diesel heater off ebay I suppose...
|
|
|
Rainwater
National Hazard
Posts: 919
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
To the top of a reflux column, attach a distillation condencer.
The temperature of the reflux column should be keeped slightly above the bp of your target compound so that it can escape.
To your reactor/boiling flask, add the solution and a catalyst like alumina (al2o3).
That should get you some lower boiling point compounds.
Your gonna need a metal reactor, copper is not recommended as it will decompose your products, maybe stainless steel. Big petro uses quartz lined
reactors
Anyway, let the solution reflux, the alumina will crack long chain molecules into all sorts of toxic and interesting stuff.
Sulfer will kill your catalyst, so will transision metals.
The output of the reflux condencer will be a variety of things that will need fractional distillation to seperate. Industrialy this is done in-sute
with a reboiler and reflux tower, but batches can be done in the lab safely.
Would love to compair notes.
Biggest trend i have seen is reactor material and reflux temperature. Lower temperatures crack things in the middle more than higher temps. Gives more
double bonds stuff to, at the cost of time, the wrong reactor material goves carbon and h2 gas
I was able to get few good solvents from diesel using this method.
Takes a lot of work and is cheaper to buy it.
[Edited on 27-2-2024 by Rainwater]
"You can't do that" - challenge accepted
|
|
|
Sulaiman
International Hazard
Posts: 3695
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Quote: Originally posted by Rainwater  | | The output of the reflux condencer will be a variety of things that will need fractional distillation to seperate |
this is the part of amateur chemistry that frustrates me,
analysing my reaction products.
eg In this case I could measure bp ranges easily
determine if a double-bond is present, or an aromatic ring, with some effort.
I doubt that burning, smelling, measuring density etc would be of much use to me,
so I'd have very little idea what reactions actually occurred.
Also,
Why not use a (possibly sacrificial) borosilicate pot/flask?
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
Rainwater
National Hazard
Posts: 919
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
The sacrificial reactor is a personal choice,
I run my reflux 530c.
I use black iron pipe( mild steel ) with an aluminum tube sticking out of the end.
The pipe is long enough to act as a reflux column. The tube feeds a rbf with a fractional column attached. To ugly to photograph and not a good source
of alkanes unless you have no other options.
When i tried a copper tube, i got some flammable gas, but almost nothing that condenced at 0c.
When i get time this is on my list to revisit.
I want to try different catalyst/temp combinations and see what bp the different fractions have.
"You can't do that" - challenge accepted
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
