danieldavies
Harmless
Posts: 19
Registered: 31-5-2019
Member Is Offline
|
|
Recovering palladium from triphenylphosphene palladium
Hello. Does anyone know how i can recover the palladium from triphenylphosphene palladium, safely. Thanks.
|
|
|
Sulaiman
International Hazard
Posts: 3704
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Please excuse my ignorance but,
surely triphenylphosphene palladium is much more valuable than the recoverable palladium.
Its like recovering silver from silver nitrate, but more extreme.
Maybe you could purify it for sale?
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
Rainwater
National Hazard
Posts: 927
Registered: 22-12-2021
Member Is Offline
Mood: Loving every second
|
|
That is one cool looking molecule.
Its got carbon in it so combustion is an option
No telling what toxic little things will come flying off.
"You can't do that" - challenge accepted
|
|
|
danieldavies
Harmless
Posts: 19
Registered: 31-5-2019
Member Is Offline
|
|
Quote: Originally posted by Sulaiman  | Please excuse my ignorance but,
surely triphenylphosphene palladium is much more valuable than the recoverable palladium.
Its like recovering silver from silver nitrate, but more extreme.
Maybe you could purify it for sale? |
|
|
|
danieldavies
Harmless
Posts: 19
Registered: 31-5-2019
Member Is Offline
|
|
A customer wants me to recover the palladium from it.
|
|
|
Texium
Administrator
Posts: 4593
Registered: 11-1-2014
Location: Salt Lake City
Member Is Online
Mood: PhD candidate!
|
|
Is it tetrakis(triphenylphosphine)palladium(0) or bis(triphenylphosphine)palladium(II) chloride? That will make a difference on how you proceed.
|
|
|
Texium
|
Thread Moved
12-12-2023 at 06:47 |
danieldavies
Harmless
Posts: 19
Registered: 31-5-2019
Member Is Offline
|
|
|
|
|
Texium
Administrator
Posts: 4593
Registered: 11-1-2014
Location: Salt Lake City
Member Is Online
Mood: PhD candidate!
|
|
Jeez, that’s a ton! Ok, so it’s the chloride. That means the palladium is in the +2 oxidation state. If you can oxidize all the triphenylphosphine
to triphenylphosphine oxide, you should be able to partition it into an organic and aqueous phase, with the organic containing the triphenylphosphine
oxide and the aqueous containing palladium(II) chloride. Then it’s just a matter of reducing it to the metal.
|
|
|
danieldavies
Harmless
Posts: 19
Registered: 31-5-2019
Member Is Offline
|
|
Seems like a lot of work.. would low heat oxidise the triphenylphosphene?
|
|
|
Texium
Administrator
Posts: 4593
Registered: 11-1-2014
Location: Salt Lake City
Member Is Online
Mood: PhD candidate!
|
|
See my U2U message.
|
|
|
clearly_not_atara
International Hazard
Posts: 2793
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
That's a fucking ton dude... I hope this customer is paying you well.
I suspect that alkali might give a precipitate of PdO. If the ppt is contaminated with TPP this might be effectively removed with oil. Hydroxide is a
pretty strong ligand. This can be reverted to the metal directly by heating.
|
|
|
Rainwater
National Hazard
Posts: 927
Registered: 22-12-2021
Member Is Offline
Mood: Loving every second
|
|
After a little research, you would be better off titrating a sample, comparing that to the theoretical yield, and sending your customer a mented
platnium coin
"You can't do that" - challenge accepted
|
|
|
clearly_not_atara
International Hazard
Posts: 2793
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
| Quote: Originally posted by Rainwater | | After a little research, you would be better off titrating a sample, comparing that to the theoretical yield, and sending your customer a mented
platnium coin |
Palladium. But yes, if you can verify that the material is still what it says on the label, it's far more valuable than the palladium it contains --
assuming that you can unload it at a market price. So it would net a nice profit to just send back an equivalent amount of palladium and keep the
"change", as it were.
|
|
|
Texium
Administrator
Posts: 4593
Registered: 11-1-2014
Location: Salt Lake City
Member Is Online
Mood: PhD candidate!
|
|
That’s a great point. Many organic chemists would happily buy some of this compound for more than the price of the palladium since it is a very
useful catalyst, though you may be hard pressed to find anyone wanting to buy more than a few grams of it, since it is used in catalytic amounts.
|
|
|
numos
Hazard to Others
Posts: 269
Registered: 22-2-2014
Location: Pasadena
Member Is Offline
Mood: No Mood
|
|
The problem is that you have no way of certifying the purity to a point where a chemical plant (the only people buying this much) is going to buy this
from you - not to mention they have dedicated vendors and would likely not buy from an individual. The only people you'll have luck selling this to is
are amateur chemists, and then you'll have to deal with shipping pea size quantities over the course of years if not decades.
The current price for this catalyst from sigma is $17/g - and that's from a trusted vendor with a certificate of purity so you're not gonna get
anything near that much. Still, that's around $42k for the bucket.
Turn this into Pd and you get ~380 g of Pd which you can easily sell close to spot at around $33/g (currently) for a total of $12.5k.
So yes there is a price difference but it seems much less significant that one might assume at first glance... Generally the work in making chemicals
is much more valuable than the feedstocks. In this case, the feedstock itself IS actually a significant portion of the cost. Decisions, decisions....
edit
Oh I almost forgot - I tried converting 25 g of crappy brown Pd(PPh3)4 into Pd metal a while back - boy what a mess!!! I got a slimy phosphine goo
with some Pd powder/oxides/phosphides and ended up dumping it all after a few days of toiling. Good luck with 2.5 kg, that's gonna be a doozy!
[Edited on 12-13-2023 by numos]
|
|
|
Fleaker
International Hazard
Posts: 1252
Registered: 19-6-2005
Member Is Offline
Mood: nucleophilic
|
|
Let me know if you want to sell it.
Neither flask nor beaker.
"Kid, you don't even know just what you don't know. "
--The Dark Lord Sauron
|
|
|
Dr.Bob
International Hazard
Posts: 2739
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Wow, I thought I had a lot of Pdterakis that had gone bad. But the dichloride should be stable as a rock, so it should be quite valuable as that,
moreso than as the metal. But your call. There us a paper that describes the recovery of precious metals in the references section, look here:
http://www.sciencemadness.org/talk/viewthread.php?tid=157863...
or try this link:
http://www.sciencemadness.org/talk/files.php?pid=672948&...
You may need to request access to that part of the forum. Or I can send it.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
