RU_KLO
Hazard to Others
Posts: 209
Registered: 12-10-2022
Location: Argentina
Member Is Offline
|
|
Breaking Colloids (earth + water)
Hi,
Im trying to extract nitrates form earth, without using "special chemicals/tools". (Im trying to reproduce old practices for gathering chemicals)
Process so far:
0,5kg of dirt (from a flowershop) were mixed in 250ml boiling water.
This was filtered, first by a sieve, then by filterpaper, and lastly by a packed cottonplug in a funnel.
Currently I have a light brown (earth smelling) colloid.
Next step is reducing water by 60-75% by boiling. And filtering again.
(I hope this removes more particles from solution)
Then some Potassium carbonate solution (made from boiling wood ash in water) will be added to remove insoluble carbonates (precipitation + filtration)
.
I think that a colloid will be obtained after these procedures, and cristallization of nitrates will not be possible. (maybe Im wrong, as not tried
yet)
Is there a "non special chemical/tool" procedure for clearing this colloid?
My thoughs after searching:
1) centrifugation (spinning a bottle over my head - no special tools are allowed....)
2) making soap from animal fat / oil + potash water (wood ash + water)
and then adding soap as flocculant?
Will this work?
Will soap react with nitrates (thus lowering the yield?)
Another idea?
Thanks,
Go SAFE, because stupidity and bad Luck exist.
|
|
|
fx-991ex
Hazard to Self
Posts: 99
Registered: 20-5-2023
Member Is Offline
|
|
Use alcohol/ethanol to crystallize out the KNO3 as it has low solubility in those.
|
|
|
Sulaiman
International Hazard
Posts: 3692
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Maybe first test for presence of nitrate ion?
https://en.wikipedia.org/wiki/Nitrate_test
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
fx-991ex
Hazard to Self
Posts: 99
Registered: 20-5-2023
Member Is Offline
|
|
Thats a good idea, i dont think flowershop earth has good nitrate content, probably some slow release ammonium based fertilizer or other cheap crap in
there.
[Edited on 4-8-2023 by fx-991ex]
[Edited on 4-8-2023 by fx-991ex]
|
|
|
Rainwater
National Hazard
Posts: 919
Registered: 22-12-2021
Member Is Offline
Mood: indisposition to activity
|
|
I've done it using sawdust from the barn floor.
Lots of work, bad yields. Not recommended
Easy way to test for nitrates is fish take water test strips.
Gives lots of readings.
I like these.
https://www.amazon.com/gp/aw/d/B097R5CSJS
As for settling the suspension, a cheap and easy to make floculant, but pain to purify is Al(OH)3
Lots of videos about it. In short, aluminum foil + hcl, filter, + baking soda + a lot of water, mix, filter, a lot of water, mix filter.
Filtering this stuff will take longer than shipping from china.
Your left with a gello like material that will cause particals to clump together and fall out of suspension.
Can be purchesed in 50lb bags for use in water filter systems. Non toxic, safe to handle.
"You can't do that" - challenge accepted
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
