Sciocrat
Harmless
Posts: 36
Registered: 30-3-2007
Member Is Offline
Mood: Scientifically curious
|
|
A few esterification questions
I am interested in the following esterification reaction:
C2H5OH + ClCH2COOH <->
ClCH2COOC2H5 + H2O
(ethanol + chloroacetic acid <-> ethyl chloroacetate + water)
I have been reading about the synthesis of ethyl bromoacetate in Vogel and in several other sources and I assume the synthesis of ethyl chloroacetate
would be similar. However, most of the preparation methods that I encountered, require some way of water removal from the reaction, in order to shift
the equilibrium in favor of the product. In case one didn't have the necessary equipment to facilitate the removal of water, would simply adding a
surplus of ethanol be enough to achieve a reasonable yield?
Also, after the reaction solution has been refluxed for some time in order to achieve equilibrium, could the ester simply be obtained by dumping the
mixture in cold water? Chloroacetic acid and ethanol are miscible/soluble in water. However, ethyl chloroacetate doesn't dissolve in water, so it
would thereby separate and could be collected and dried?
Sorry if this seems banal, but I just wanted to check if I understand things correctly.
|
|
|
Random
International Hazard
Posts: 1120
Registered: 7-5-2010
Location: In ur closet
Member Is Offline
Mood: Energetic
|
|
ethyl chloroacetate is very toxic like http://en.wikipedia.org/wiki/Ethyl_bromoacetate
check, I wouldn't suggest you making it, though, if there was a safe way to make it I am interested too
It can be used for strawberry aroma synthesis.
|
|
|
Nicodem
Super Moderator
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Sciocrat  | | Also, after the reaction solution has been refluxed for some time in order to achieve equilibrium, could the ester simply be obtained by dumping the
mixture in cold water? Chloroacetic acid and ethanol are miscible/soluble in water. However, ethyl chloroacetate doesn't dissolve in water, so it
would thereby separate and could be collected and dried? |
An excess of ethanol will improve the conversion at the equilibrium point, but it will also reduce the recovery from the extraction. First of all, by
the rule of thumb you add the reaction mixture in water soluble solvents (EtOH, MeOH, THF, DMSO, DMF, etc.) to at least 4-times the volume of water
and depending on the logP of your desired product you apply from one to several extractions with the most appropriate solvent, combine the extract and
then you can continue with washings, rotavaping and fractionation. If you will not dilute with enough water your recovery will suffer.
But in any case it is better to use more sulfuric acid for the esterification if you suspect your ester is a hard to form one - not only you reach the
equilibrium faster, you also move the equilibrium to the right by binding water by protonation. It is not unusual to use 100 mol% H2SO4 or more for
esterifications (instead of "catalytic amounts" only).
…there is a human touch of the cultist “believer” in every theorist that he must struggle against as being
unworthy of the scientist. Some of the greatest men of science have publicly repudiated a theory which earlier they hotly defended. In this lies their
scientific temper, not in the scientific defense of the theory. - Weston La Barre (Ghost Dance, 1972)
Read the The ScienceMadness Guidelines!
|
|
|
chemoleo
Biochemicus Energeticus
Posts: 3005
Registered: 23-7-2003
Location: England Germany
Member Is Offline
Mood: crystalline
|
|
Under what conditions would you get the ether then (by loss of HCl)?
Strong base, i.e. 5M KOH?
i.e.
C2H5OH + ClCH2COOH <-> C2H5O-CH2COOH+ HCl
Never Stop to Begin, and Never Begin to Stop...
Tolerance is good. But not with the intolerant! (Wilhelm Busch)
|
|
|
smuv
National Hazard
Posts: 842
Registered: 2-5-2007
Member Is Offline
Mood: Jingoistic
|
|
I would be more worried about getting diethyl ether by dehydration of ethanol. Also, chloroacetic acid is acidic enough that it needs no additional
acid catalyst (though it might be desirable to mop up some water). I recall the preparation of the chloro-acetate esters (methyl/ethyl) as being
common in older lab manuals; sciocrat, maybe you should look through the forum library to see what you find?
|
|
|
UnintentionalChaos
International Hazard
Posts: 1454
Registered: 9-12-2006
Location: Mars
Member Is Offline
Mood: Nucleophilic
|
|
| Quote: Originally posted by smuv | | I would be more worried about getting diethyl ether by dehydration of ethanol. Also, chloroacetic acid is acidic enough that it needs no additional
acid catalyst (though it might be desirable to mop up some water). I recall the preparation of the chloro-acetate esters (methyl/ethyl) as being
common in older lab manuals; sciocrat, maybe you should look through the forum library to see what you find? |
Apparently however, a strong acid catalyst speeds the reaction and improves yield. See note 8: http://www.orgsyn.org/orgsyn/orgsyn/prepContent.asp?prep=cv3...
I don't know how toxic the stuff is, but it does note that it is very lachrymatory.
Department of Redundancy Department - Now with paperwork!
'In organic synthesis, we call decomposition products "crap", however this is not a IUPAC approved nomenclature.' -Nicodem
|
|
|
smuv
National Hazard
Posts: 842
Registered: 2-5-2007
Member Is Offline
Mood: Jingoistic
|
|
YES, it is extremely lachrymatory, so much so that the toxicity is kinda irrelevant. I wouldn't use this stuff outside of a hood.
Wow, that really isn't much sulfuric acid, definitely not enough to offset the equilibrium due to soaking up some water; I guess chloroacetic acid is
really just borderline acidic enough to catalyze its own esterification.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
