SplendidAcylation
Hazard to Others
Posts: 203
Registered: 28-10-2018
Location: Starving in some deep mystery
Member Is Offline
Mood: No one I think is in my tree.
|
|
Drying acyl halides with molecular sieves?
Hi,
Having recently prepared benzoyl chloride by the chlorination of benzaldehyde, I was about to add molecular sieves to the bottle, as I usually do, but
then I began to doubt whether or not molecular sieves are compatible with acyl halides, having never dealt with the latter before.
I have Googled it, and I have found nothing to indicate any problems with molecular sieves and acid halides, but not very many examples of their being
used for these compounds...
Can anyone confirm that it will not be a problem?
I usually don't like to post such dumb questions, but I really don't want to take the chance of ruining my benzoyl chloride!
Thanks in advance
|
|
|
PirateDocBrown
National Hazard
Posts: 570
Registered: 27-11-2016
Location: Minnesota
Member Is Offline
Mood: No Mood
|
|
Sieves do not like acids. If you have some hydrolysis, you will have acids. Maybe try calcium chloride?
Phlogiston manufacturer/supplier.
For all your phlogiston needs.
|
|
|
SplendidAcylation
Hazard to Others
Posts: 203
Registered: 28-10-2018
Location: Starving in some deep mystery
Member Is Offline
Mood: No one I think is in my tree.
|
|
Yes, that is one of the reasons I am unsure about it...
Indeed, one might argue that it isn't really necessary to dry acyl halides as they react with water and shouldn't contain any, but of course there
will always be some that doesn't react straight away, besides, a drying agent could perhaps remove the water before it reacts, if there is a slight
leak in the bottle or such like.
|
|
|
UC235
National Hazard
Posts: 565
Registered: 28-12-2014
Member Is Offline
Mood: No Mood
|
|
There is no way there would be free water in acyl halides. Free carboxylic acid and dissolved HCl from reaction with moisture, yes.
|
|
|
Texium
Administrator
Posts: 4580
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
If you want to neutralize any acids that may be present in your benzoyl chloride, perhaps treating it with some calcium carbonate would work. I
haven't tried this myself, but I wouldn't foresee it being a problem. Benzoyl chloride itself shouldn't react with carbonates.
|
|
|
SplendidAcylation
Hazard to Others
Posts: 203
Registered: 28-10-2018
Location: Starving in some deep mystery
Member Is Offline
Mood: No one I think is in my tree.
|
|
Thanks for the responses.
Quote: Originally posted by UC235  | | There is no way there would be free water in acyl halides. Free carboxylic acid and dissolved HCl from reaction with moisture, yes.
|
The reason I was initially worried about water was that there seems to be condensed droplets on the sides of the bottle; I thought this might have
been aqueous, due to the dissolution of HCl vapours in atmospheric water vapour.
Since then, I have come to the conclusion that the droplets are probably just condensed benzoyl chloride.
| Quote: Originally posted by Texium | | If you want to neutralize any acids that may be present in your benzoyl chloride, perhaps treating it with some calcium carbonate would work. I
haven't tried this myself, but I wouldn't foresee it being a problem. Benzoyl chloride itself shouldn't react with carbonates. |
I thought about this too!
If benzoic acid is insoluble in benzoyl chloride, then it would obviously precipitate out and cause no problem, if it does remain dissolved, then I
suppose it might be neutralized by solid CaCO3; Either way, dissolved HCl would definitely react, so that sounds like a good idea.
I was surprised by how slowly benzoyl chloride seems to react with water; It only seems to fume in the air when it is humid, and droplets of benzoyl
chloride seem to happily float atop water, even aqueous sodium hydroxide, for quite a while before dissolving.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
