TriiodideFrog
Hazard to Others
Posts: 108
Registered: 27-9-2020
Member Is Offline
|
|
Disposal of copper acetate
Is there a proper guideline to dispose of copper acetate? Any ideas help.
|
|
|
outer_limits
Hazard to Others
Posts: 139
Registered: 3-3-2020
Member Is Offline
Mood: hybridized
|
|
How much of it do you have? You could at least try to get copper back by electrolysis or chemically
|
|
|
Fluorite
Hazard to Others
Posts: 138
Registered: 26-12-2018
Location: United Arab Emirates
Member Is Offline
|
|
add sulfuric acid and distill acetic acid like nurdrage did with copper nitrate
|
|
|
itsallgoodjames
Hazard to Others
Posts: 276
Registered: 31-8-2020
Location: America Lite
Member Is Offline
|
|
For copper (and most transition metals), I precipitate them out as their hydroxides, then store that. Plus you can use the copper hydroxide for
making other copper salts.
Nuclear physics is neat. It's a shame it's so regulated...
Now that I think about it, that's probably a good thing. Still annoying though.
|
|
|
TriiodideFrog
Hazard to Others
Posts: 108
Registered: 27-9-2020
Member Is Offline
|
|
Ok thanks!
|
|
|
Sulaiman
International Hazard
Posts: 3695
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
eventually you will need to dispose of copper (and other metal) salts,
heavier metals should not enter any aquifer,
so need to go to landfill,
preferably as (almost) insoluble compounds such as sulphides.
minimise pollution but do not go to extremes as your small bit of polution is totally insignificant compared to other sources.
(e.g. copper is used in swimming pools as an algicide, pools have water changes)
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
macckone
Dispenser of practical lab wisdom
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
copper is valuable enough to plate out or otherwise recover.
If you have metal salts the usual way to dispose of them is to render them insoluble.
For copper that would be converting to hydroxide by addition of sodium hydroxide.
You could also do the basic carbonate with sodium carbonate or bicarbonate.
Both will convert to the oxide on strong heating.
Copper oxide is practically insoluble, but it will dissolve in acids.
|
|
|
Romix
Hazard to Others (Literally)
Posts: 483
Registered: 19-6-2015
Member Is Offline
Mood: No Mood
|
|
When I added baking soda to copper acetate, nothing dropped out of the solution...
Not tried adding KOH to Copper Acetate.
But I did to Tin Acetate and not much happened, I think tin went in complex with the base... not much of a grey and brown precipitate dropped out. But
there were way more Tin than that.
And KOH with unreacted vinegar were exothermically heating up a lot and deformed plastic bottle I did experiment in.
I didn't have that much of heating dropping copper out of nitrates, but I know what I'm doing...
Once nearly melted a hole in my bath, hahaha 
[Edited on 12-9-2022 by Romix]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
