Yttrium2
Perpetual Question Machine
Posts: 1104
Registered: 7-2-2015
Member Is Offline
|
|
What caused these salt crystals to appear
Appear so high on the pot?
|
|
|
SWIM
National Hazard
Posts: 970
Registered: 3-9-2017
Member Is Offline
|
|
Evaporation of the splashing liquid from the boiling water.
The large oval crystals that have formed in the pot are more confusing though.
But they're probably hollow spheres of calcium carbonate which formed around some albumins or other organics.
Appear so high on the pot?
Why yes, you do.
|
|
|
Yttrium2
Perpetual Question Machine
Posts: 1104
Registered: 7-2-2015
Member Is Offline
|
|
Salt was added, mind you.
I just don't see how it got coated all over the sides. It didn't seem to be splashing
|
|
|
DraconicAcid
International Hazard
Posts: 4333
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
When the water boils, each bubble sprays a fine mist of hot solution everywhere. That gives you the crystals.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Yttrium2
Perpetual Question Machine
Posts: 1104
Registered: 7-2-2015
Member Is Offline
|
|
What kind of distillation would seperate the two?
A Clausen adapter?
|
|
|
Abromination
Hazard to Others
Posts: 432
Registered: 10-7-2018
Location: Alaska
Member Is Offline
Mood: 1,4 tar
|
|
Stirring, a normal still head and a flask properly filled should be enough to prevent much salt from coming over.
List of materials made by ScienceMadness.org users:
https://docs.google.com/spreadsheets/d/1nmJ8uq-h4IkXPxD5svnT...
--------------------------------
Elements Collected: H, Li, B, C, N, O, Mg, Al, Si, P, S, Fe, Ni, Cu, Zn, Ag, I, Au, Pb, Bi, Am
Last Acquired: B
Next: Na
-------------- |
|
|
vmelkon
National Hazard
Posts: 669
Registered: 25-11-2011
Location: Canada
Member Is Offline
Mood: autoerotic asphyxiation
|
|
A long glass tube in the style of a fractional distillation column with some glass beads should be able to catch the mist.
Signature ==== Is this my youtube page? https://www.youtube.com/watch?v=tA5PYtul5aU
We must attach the electrodes of knowledge to the nipples of ignorance and give a few good jolts.
Yes my evolutionary friends. We are all homos here. |
|
|
Ubya
International Hazard
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
exact reason why boiling heavy metal salts solution in an uncovered vessel is a bad idea for contamination.
what abromination said is right, with strong stirring big bubbles don't form ( and it doesn't bump), smaller bubbles make a smaller amount of mist,
plus a normal flask already has a small neck, less mist can escape (a beaker has a big exposed surface area and not much containing power of the
mist), add a short column if you are paranoid and just need to remove the solvent, or use a normal distillation setup if you want to recover
everything.
now the real problem, an egg does not fit through a 24/40 joint, this could be a problem for your experiment of distilling salt water and eggs
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
|
unionised
International Hazard
Posts: 5126
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
https://www.scilabware.com/en/quickfit-adapters-splash-head-...
|
|
|
unionised
International Hazard
Posts: 5126
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Ubya  | | the real problem, an egg does not fit through a 24/40 joint, this could be a problem for your experiment of distilling salt water and eggs
|
What problem?
https://www.scilabware.com/en/quickfit-retaining-clip-for-wi...
|
|
|
Ubya
International Hazard
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
hahaha that's cheating!!!
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
|
Felis Corax
Harmless
Posts: 35
Registered: 26-7-2019
Location: These Uninted States of Murica
Member Is Offline
Mood: Pre-project euphoria
|
|
I have to ask... Distilling salt water in the presence of eggs? Is this some sort of bizarre experiment, or are you making hard boiled eggs? Or is it
both?
Nothing is pure, nothing is perfect, nothing is clean.
|
|
|
Ubya
International Hazard
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
| Quote: Originally posted by Felis Corax | | I have to ask... Distilling salt water in the presence of eggs? Is this some sort of bizarre experiment, or are you making hard boiled eggs? Or is it
both? |
he is yttrium2, don't ask, he is kinda special
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
|
Felis Corax
Harmless
Posts: 35
Registered: 26-7-2019
Location: These Uninted States of Murica
Member Is Offline
Mood: Pre-project euphoria
|
|
This only makes me more curious. I must know the secret of the eggsperiment!
Nothing is pure, nothing is perfect, nothing is clean.
|
|
|
teodor
National Hazard
Posts: 876
Registered: 28-6-2019
Location: Heerenveen
Member Is Offline
|
|
My guess that the question was about the solvent and a salt, the eggs just are kind of accidental local contamination. I think any egg-contaminated
solvent can be easily distilled from eggs, so, not a big problem. Except may be H2S leak.
So, I think H2S contamination is a kind of problem. Do it in a fume hood or outside.
[Edited on 20-8-2019 by teodor]
|
|
|
mayko
International Hazard
Posts: 1218
Registered: 17-1-2013
Location: Carrboro, NC
Member Is Offline
Mood: anomalous (Euclid class)
|
|
| Quote: Originally posted by Ubya |
now the real problem, an egg does not fit through a 24/40 joint, this could be a problem for your experiment of distilling salt water and eggs
|
There's a lifehack for this! You have to boil the egg first though:
https://www.youtube.com/watch?v=_JBOX116Pzw
al-khemie is not a terrorist organization
"Chemicals, chemicals... I need chemicals!" - George Hayduke
"Wubbalubba dub-dub!" - Rick Sanchez
|
|
|
Steam
Hazard to Others
Posts: 238
Registered: 25-3-2014
Location: Minnesota
Member Is Offline
Mood: Triple Point
|
|
| Quote: Originally posted by Ubya |
now the real problem, an egg does not fit through a 24/40 joint, this could be a problem for your experiment of distilling salt water and eggs
|
You might be able to use Quail Eggs.
https://www.amazon.com/Turnbull-FarmsTM-Fresh-Gourmet-Quail/...
DISCLAIMER: The information in this post is provided for general informational purposes only and may not reflect the current law in your jurisdiction.
No information contained in this post should be construed as legal advice from the individual author, nor is it intended to be a substitute for legal
counsel on any subject matter. No reader of this post should act or refrain from acting on the basis of any information included in, or accessible
through, this post without seeking the appropriate legal or other professional advice on the particular facts and circumstances at issue from a lawyer
licensed in the recipient’s state, country or other appropriate licensing jurisdiction.
|
|
|
teodor
National Hazard
Posts: 876
Registered: 28-6-2019
Location: Heerenveen
Member Is Offline
|
|
By the way, why some people use salt water to boil eggs. Are the eggs boiled in salt water different from those boiled in plain water?
|
|
|
Yttrium2
Perpetual Question Machine
Posts: 1104
Registered: 7-2-2015
Member Is Offline
|
|
I thought this was a good demonstation of how easily the salt travels. I'm sure a lot of peope would think that the salt would only be where the water
line is.
In no way was the pot frothing up -- so the salt did travel quite a ways. I'm not so sure that a regular distillation apparatus could separate
regular salt water without some sort of a splash head. Maybe with stirring, maybe if boiled slowly (another question: is there such thing as a slow
boil/fast boil? cause water boils at 212f and no matter how hot you get it the water stays the same temperature)
I used salt water to get the water hotter, I didn't notice any difference.
In another experiment, I added salt water to boiling water to see if it would froth up like adding boiling stones to a boiling solvent -- I wondered
if it would stop the boiling first or increase the boiling first by adding nucleation sites. -- As soon as the salt water entered the water, the
boiling immediately stopped.
I'm just fooling around, making little elementary, if that observations with the naked eye. I really do need to get busy with the math, so I can get
on with my major.
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
DraconicAcid is correct. The fine mist caused by bubbling carries salt around. A regular distillation apparatus can most definitely separate salt from
water - don't overcomplicate things. I've distilled many solvents from salts without issue. Just don't fill the boiling flask more than halfway, and
mists and splashing are effectively contained to that flask and maybe the tube abovei it. If a trace of salt spray makes it to the receiver (and it's
a problem for your intended use), just distill again.
In your other experiment, the main influence there is temperature. You poured (presumably) room temperature salt water into boiling water, and this
reduced the overall temperature enough to bring it below the boiling point. To investigate your nucleation site hypothesis, you could try heating the
salt water to the same temperature as your boiling water and then add them together. Note that this doesn't necessarily mean that both pots will be
actively boiling.
|
|
|
Yttrium2
Perpetual Question Machine
Posts: 1104
Registered: 7-2-2015
Member Is Offline
|
|
Blah, I meant to say I added salt to the boiling water. It immediately quenched the boiling.
|
|
|
teodor
National Hazard
Posts: 876
Registered: 28-6-2019
Location: Heerenveen
Member Is Offline
|
|
I think this experiment is interesting, with addition of a salt to a boiling water. Possible the frothing up is dependent only on the salt solubility.
So, can you try with other salts?
|
|
|
Vomaturge
Hazard to Others
Posts: 286
Registered: 21-1-2018
Member Is Offline
Mood: thermodynamic
|
|
As far as why the salt is on the walls of the pot, either tiny flying droplets (i know it didn't look like it was spattering, because they are so
small) or else evaporative creep although I think of that phenomenon as happening more slowly.
As far as whether you can get "fast" and "slow" boils, Definitely. The temperature of the water will be largely the same while boiling, regardless of
how much heat is being added, but when heat is added more rapidly, that 212f water turns into steam more rapidly. That change from liquid to gas
absorbs the extra energy and keeps the temperature at the boiling point, but creates steam more rapidly in the process.
Having done a little cooking myself, I will say that adding any cool material to water at its boiling point will usually cool it enough to stop the
boiling for some seconds. I could go on with math about specific heats of various substances, and the temperature change required to stop boiling, but
I can say that in real life 250 ml of dry grain will stop 2 liters of water from boiling for long enough to turn down the heat. If vigorous boiling
does start again, it will foam and overflow.
As far as why you didn't see any boiling triggered by nucleation, that's because a normal pan with scratches and uneven heating at the bottom is
already a good place for nucleation, and the water already wasn't superheated. Maybe try with a clean scratch free glass and heating in the microwave?
Stand back, if you get the temp just right that should spray hot water pretty far.
[Edited on 24-8-2019 by Vomaturge]
|
|
|
Quieraña
Harmless
Posts: 38
Registered: 24-8-2019
Member Is Offline
|
|
| Quote: Originally posted by teodor | | By the way, why some people use salt water to boil eggs. Are the eggs boiled in salt water different from those boiled in plain water?
|
I'm so glad that somebody asked this. The reason that I can come to is that at different altitudes you have different boiling points. 25 years ago
I lived in Colorado and just above Denver and Boulder we had to boil water longer to make boiled eggs and water also froze at a higher temperature
interesting quality for the compound. Salt water freezes below freshwater's freezing point and the same can be said of the boiling it boils higher
than freshwater's boiling point so this would solve the altitude problem hope this helps. 
[Edited on 25-8-2019 by Quieraña]
|
|
|
teodor
National Hazard
Posts: 876
Registered: 28-6-2019
Location: Heerenveen
Member Is Offline
|
|
Well, I was always curious what is the relationship between water and its boiling temperature and protein folding. As far as I understand folding of
eggs proteins makes eggs "boiled", not evaporation of internal water. If you have experience of poor eggs cooking in high altitude I suspect that
forming of steam around eggs is also not very important for preparing them, but some magic of boiling water temperature at sea level.
Alas, I see no advantage of using eggs, even Quail Eggs as boiling chips if they work only starting from 100 degrees C.
One day I will try to prepare eggs by alcohol injection, I red it helps to fold proteins keeping the reaction temperature much lower.
[Edited on 27-8-2019 by teodor]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
