Pumukli
National Hazard
Posts: 705
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
Renewing old burette markings
Anyone tried to renew old and hardly visible markings on a burette or similar glassware?
I have difficulty determining the volume that the meniscus of water clear solutions in the burette show because the markings are so badly ruined.
Especially in the region what I seem to use most (first 5 millilitres). 
(Overwriting with black permanent ink is not good. It makes the meniscus almost invisible.)
I'm thinking about some sort of ink which sticks in the grooves of the markings but could be easily removed from the smooth glass surface between
those grooves.
Ideas?
|
|
|
Ubya
International Hazard
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
nail polish, it should work
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
|
wg48temp9
National Hazard
Posts: 784
Registered: 30-12-2018
Location: not so United Kingdom
Member Is Offline
|
|
I had similar problems with cheap thermometers.
Permanent markers tend to be dyes dissolved in a solvent.
Some marks are printed on but If you do have grooves I would think you need a black paint meaning something that contains insoluble black fine
particles that will get trapped in the grooves or trapped in a rough surface but can be wiped from the smooth surface.
I am wg48 but not on my usual pc hence the temp handle.
Thank goodness for Fleming and the fungi.
Old codger' lives matters, wear a mask and help save them.
Be aware of demagoguery, keep your frontal lobes fully engaged.
I don't know who invented mRNA vaccines but they should get a fancy medal and I hope they made a shed load of money from it.
|
|
|
Sulaiman
International Hazard
Posts: 3695
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Black permanent marker pen then a scrub with a dry sponge worked for me.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
