Halcyon
Harmless
Posts: 42
Registered: 5-10-2010
Member Is Offline
Mood: No Mood
|
|
Obtaining Hexane (Down-under)
Can anyone give me a lead on finding Hexane in Australia (or any non-regional info, like what sort of places might use it)?
I've tried paint and fibreglass places, but no-one seems to have even heard of it, and I'm at a loss for other places to look.
[Edited on 13-10-2010 by Halcyon]
|
|
|
woelen
Super Administrator
Posts: 8014
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Do you really need hexane? For many applications one also can use petroleum ether (ligroin), which is available with different boiling trajectories.
The most common ones are 40 ... 60, 60 ... 90, 100 ... 140. I think that the 40 ... 60 boiling range (in degrees C) is closest to hexane. This is a
mix of alkanes and cycloalkanes and usually is very pure with respect to non-volatile residues and non-saturated hydrocarbons.
|
|
|
Halcyon
Harmless
Posts: 42
Registered: 5-10-2010
Member Is Offline
Mood: No Mood
|
|
I don't need hexane, but I do want a non-polar solvent that is liquid at room temp, reasonably safe (so not diethyl ether), but that can be
distilled off at as little above room temp as possible (or at/below room temp with the vacuum pump I have).
Right now, the purpose is to isolate capsaicinoids from chilli oil previously soxhlet-extracted using methanol.
In the future, I might try something that possibly has something to do with why I can't find hexane around the place, but that's not so important.
The reason I'm looking at hexane is because I want to pull off the solvent without burning/damaging the extract or changing the flavours.
Where would I go about sourcing petroleum ether? Is the best way simply to buy some Shellite (naptha) and distill off the most volatile fraction with
a vigereaux column?
*EDIT* I also notice that shellite, when burned, leaves a slight residue - if that's what you suggest, what might I do to purify the resulting solvent
so that I didn't contaminate my extract? (Admittedly I probably won't be adding pure capsaicinoids to my ramen, but it's still relevant)
[Edited on 13-10-2010 by Halcyon]
|
|
|
Panache
International Hazard
Posts: 1290
Registered: 18-10-2007
Member Is Offline
Mood: Instead of being my deliverance, she had a resemblance to a Kat named Frankenstein
|
|
if heptane is fine then it can be purchased very pure and very easily as nail gun cleaner, pascode (theres an 'l' in there somewhere). Bunnings has it
its a large aerosol can, freeze, drill, decant boil off butane, distill.
|
|
|
Halcyon
Harmless
Posts: 42
Registered: 5-10-2010
Member Is Offline
Mood: No Mood
|
|
The bp of Heptane is higher than I would prefer (given that I've gotta get rid of every last bit of solvent), but it should be very workable if I
can't find hexane. Thanks, Panache.
P.S. "Paslode" 
[Edited on 13-10-2010 by Halcyon]
|
|
|
Eclectic
National Hazard
Posts: 899
Registered: 14-11-2004
Member Is Offline
Mood: Obsessive
|
|
Fractionally distill gasoline?
|
|
|
watson.fawkes
International Hazard
Posts: 2793
Registered: 16-8-2008
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Halcyon  | | The bp of Heptane is higher than I would prefer (given that I've gotta get rid of every last bit of solvent), but it should be very workable if I
can't find hexane. |
Heptane is also available as Bestine rubber cement thinner.
|
|
|
arsphenamine
Hazard to Others
Posts: 236
Registered: 12-8-2010
Location: I smell horses, Maryland, USA
Member Is Offline
Mood: No Mood
|
|
Petroleum ether is inexpensive and may be redistilled with minimal fractionation to achieve more useful boiling ranges.
Camping stove fuel is essentially petroleum naptha/ether/whatever and is sold as Shellite in Australia (if the wikipedia entry on Naptha is remotely correct).
Distilling petrol would be more problematic since it is a very complicated mix of alkanes, alkenes, and cyclizations thereof.
It contains polar as well as non-polar compounds, ethanol particularly, and might compete with some processes if you used it unknowingly.
[Edited on 13-10-2010 by arsphenamine]
|
|
|
Contrabasso
Hazard to Others
Posts: 277
Registered: 2-4-2008
Member Is Offline
Mood: No Mood
|
|
The solvent used as "lighter fluid" for both lighters and as cleaner in graphic art places was reputedly hexane or heptane. In the UK Coleman's fluid
as sold by camping and outdoor shops for camp stoves seems to be about a similar petroleum fraction too.
|
|
|
peach
Bon Vivant
Posts: 1428
Registered: 14-11-2008
Member Is Offline
Mood: No Mood
|
|
Chewing gum remover has n-hexane in it, or at least an old bottle of it I have does. You'd probably want to redistill that, as I haven't so I'm not
sure if there's other stuff in there.
Failing hexane and cyclohexane, use xylene or toluene - they're sold as glossy paint thinners or for watering down and cleaning up with epoxies and
things. They're pretty much the same thing. Those two will come pretty much pure, but both boil over 100C from memory.
Solution, use the dark power of a fully operation fridge pump and remove it under vacuum.
|
|
|
azo
Hazard to Others
Posts: 163
Registered: 12-2-2008
Member Is Offline
Mood: No Mood
|
|
n hexane is easy available here in australia i dont no what
your uses are but toluene would be a cheep alternative although i would much rather be smelling n'hexane than toluene
regards azo
|
|
|
FrankMartin
Hazard to Self
Posts: 50
Registered: 30-5-2010
Member Is Offline
Mood: No Mood
|
|
Hexane, heptane, MEK, toluene, xylene from....
http://www.oilchem.com.au/products/solvents
20L containers.
|
|
|
woelen
Super Administrator
Posts: 8014
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Smaller quantities almost certainly can be purchased at drugstores (e.g. 100 ml, 1 liter). At least, where I am we can easily buy 40...60 petroleum
ether and 100 ... 140 petroleum ether. Other boiling ranges I never have seen OTC.
The ligroin we can buy here is a completely clear liquid, which is completely saturated (no double C-bonds in it) and completely aliphatic (no
aromatic compounds in it). It does not leave a residue on evaporation. It is one of the least toxic and least reactive organic solvents and that is
why it is used quite a lot over here. Only problem is its high flammability.
|
|
|
azo
Hazard to Others
Posts: 163
Registered: 12-2-2008
Member Is Offline
Mood: No Mood
|
|
if you are in sydney you can get almost anything from consolidated chemicals or redox
only large amounts available 200l or more
I buy chemicals for my business there good people to deal with.
regards azo
|
|
|
peach
Bon Vivant
Posts: 1428
Registered: 14-11-2008
Member Is Offline
Mood: No Mood
|
|
Do you need to show a company account for VAT code to deal with those guys though? I doubt he'll have those.
I've been onto Customs and Revenue about VAT codes, in depth, and it's basically impossible to get one if you're not turning over what they literally
term a 'significant' amount of money; e.g. no specific value. There's a specific figure of £70k for a business VAT code. Which is somewhat painful
for the smaller businesses who export.
Toluene seems to be disappearing OTC in the UK from the hardware places. I think that may due to the ease with which it can be transformed to TNT over
xylene, and they're now ultra bothered about any potential bomb making components.
So, I'd still recommend xylene. It's cheap, comes clean(ish), can be bought in 500 or 1l packs and boils not much over toluene. Under vacuum from a
fridge pump, it'll be boiling not that far over room temperature.
[Edited on 15-10-2010 by peach]
|
|
|
morrie
Harmless
Posts: 5
Registered: 16-11-2010
Location: Western Australia
Member Is Offline
Mood: mellow
|
|
Beware that commercial hexane has heavy ends in it.
There is a company that uses it for extraction of flower essences not far from me. But they pre-distill it to remove the heavy ends, so as to keep it
smelling sweet.
At a chemical plant I worked at once, the Plant Manager pointed to a drum of hexane and asked me "Is that flammable?" I replied "You could compare it
with petrol"
He was a little take aback. But what would he know; he was just the plant manager. Seriously, it was a joke. The remains of that plant remain the
single biggest toxic site in the country.
If you are not part of the solution, you are part of the precipitate.
|
|
|
Halcyon
Harmless
Posts: 42
Registered: 5-10-2010
Member Is Offline
Mood: No Mood
|
|
Cheers guys (especially frankmartin -might see if they'll sell to me).
Morrie, when you say heavy ends, do you mean higher-bp fractions?
|
|
|
mycopian
Harmless
Posts: 3
Registered: 13-10-2010
Member Is Offline
Mood: No Mood
|
|
Spong mentioned that there might be issues with ordering from oilchem if you do a "walk-in". Best to have a company name to go with that order.
|
|
|
Ephoton
Hazard to Others
Posts: 463
Registered: 21-7-2005
Member Is Offline
Mood: trying to figure out why I need a dark room retreat when I live in a forest of wattle.
|
|
drugs stores and OZ are a little different than the EU 
shell depo has some nice solvents.
thanx for the heptane source Panache ripper I love bunnings.
again you come to my rescue
try a vacuum then most solvents will distill at low temps 
e3500 console login: root
bash-2.05#
|
|
|
Halcyon
Harmless
Posts: 42
Registered: 5-10-2010
Member Is Offline
Mood: No Mood
|
|
Finally found a place to source a whole bunch of solvents PM me if anyone needs a lead.
|
|
|
Neil
National Hazard
Posts: 556
Registered: 19-3-2008
Member Is Offline
Mood: No Mood
|
|
If your source dries up you could try lighter fluid for Zippos.
Also rubber cement thinner, book binding glue not contact cement.
|
|
|
UnintentionalChaos
International Hazard
Posts: 1454
Registered: 9-12-2006
Location: Mars
Member Is Offline
Mood: Nucleophilic
|
|
non-chlorinated electronics part cleaners for car work are often just hexanes and propellant. As this is oz, I sort of expect a complete lack of
halogenated stuff. I cover workup of this sort of material here: http://youtu.be/NDUd4CWU1tA
Department of Redundancy Department - Now with paperwork!
'In organic synthesis, we call decomposition products "crap", however this is not a IUPAC approved nomenclature.' -Nicodem
|
|
|
Halcyon
Harmless
Posts: 42
Registered: 5-10-2010
Member Is Offline
Mood: No Mood
|
|
Thanks for the info guys. Should take me a while to go through twenty litres, though
|
|
|
Mr. Wizard
International Hazard
Posts: 1042
Registered: 30-3-2003
Member Is Offline
Mood: No Mood
|
|
There is a rubber cement solvent used for thinning the cement. It is called Bestine, and it contains n-Heptane. I thought it contained Hexane, but may
I was remembering wrong. It is available in art supply stores here in the US. If you need hexane specifically this won't help.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
