itchyfruit
Hazard to Others
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
cobalt nitrate
According to wiki cobalt nitrate should be orange/red,mine on the other hand is purple,can anyone explain?
My cobalt chloride is blue which seems about right.
|
|
|
JohnWW
International Hazard
Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
It would depend on whether it is a salt of Co(II) or Co(III), as well as on the chemical environment of the Co cation. I have seem a quantity of a
Co(II) salt, I think it was the sulfate although I may be wrong, which was magenta (reddish-purple) in color. CoO incorporated into a siliceous
environment, as in stained glass (smalt) and glazes, is deep blue in color.
|
|
|
itchyfruit
Hazard to Others
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
I made it by heating cobalt oxide and nitric acid, as per wiki info,but theirs is redish allthough i do like the purple colour!!
|
|
|
Polverone
Now celebrating 21 years of madness
Posts: 3186
Registered: 19-5-2002
Location: The Sunny Pacific Northwest
Member Is Offline
Mood: Waiting for spring
|
|
Itchyfruit, I earlier merged your thread into the short questions thread since it was just that, a short question. You should be able to see your earlier post about this same topic on the last
page of that thread.
In the future, if you have a short question, please use the short questions thread.
PGP Key and corresponding e-mail address
|
|
|
Jor
National Hazard
Posts: 950
Registered: 21-11-2007
Member Is Offline
Mood: No Mood
|
|
I have the sulfate, chloride and nitrate.
Cobalt chloride hexahydrate is dark red and the anhydrous salt (i made this by very slow heating and driving off water) is light blue.
Cobalt sulfate heptahydrate is lighter than the chloride, it is pink/light red.
The nitrate, wich I made by dissolving pure cobalt in nitric followed by evaporation is red.
None of these is purple.
Co(III) is the favored species when the correct ligands are present (wich does not include aqua or chloro-ligands for example), while otherwise
Co(III) is an extremely strong oxidiser, rapidly oxidising water to oxygen.
|
|
|
itchyfruit
Hazard to Others
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
Thanks Polverone i didn't realise their was a short question thread, but as of now i shall use it.
What should i do if i think my short question may need a long answer ?
I tried again using cobalt sulphate and nitric acid and it's redish so i'm not sure what the purple stuff is !!
|
|
|
woelen
Super Administrator
Posts: 8014
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I also had cobalt nitrate (made by dissolving very pure cobalt metal in reagent grade nitric acid and then evaporating and slowly crystallizing) and
this is reddish/purple with a brown tinge. It definately is not pure purple, I would call it red, like Jor said, but it is not a bright red color.
|
|
|
Jor
National Hazard
Posts: 950
Registered: 21-11-2007
Member Is Offline
Mood: No Mood
|
|
Had? 
|
|
|
JohnWW
International Hazard
Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by woelen  | | I also had cobalt nitrate (made by dissolving very pure cobalt metal in reagent grade nitric acid and then evaporating and slowly crystallizing) and
this is reddish/purple with a brown tinge. It definately is not pure purple, I would call it red, like Jor said, but it is not a bright red color.
|
Magenta, as I said above; particularly equivalent to magenta dye or process magenta in color, with
approximately 2 parts red to 1 part blue, see http://en.wikipedia.org/wiki/Magenta
Salts of ferrate(VI) are also similar in color, being somewhat more reddish than permanganate(VII).
[Edited on 15-7-09 by JohnWW]
|
|
|
woelen
Super Administrator
Posts: 8014
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Yes, had. I have donated it to
someone, who did not have any cobalt salts. Having the sulfate already and the chloride and potteries grade carbonate and the pure metal I decided I
did not need another cobalt salt. I just made it (only 5 grams or so) to see how well it crystallizes and how pure I can get it (and it can be
obtained fairly easily at good purity).
@JohnWW: Yes, indeed magenta is a good description of the color, but it is not as bright as in the Wiki-page. My cobalt nitrate can be regarded as
magenta, but greyed out/shaded.
[Edited on 14-7-09 by woelen]
|
|
|
itchyfruit
Hazard to Others
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
The nitrate sample i made with cobalt sulphate is redish but turns blue when heated then back to red when it cools down.
|
|
|
woelen
Super Administrator
Posts: 8014
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Are you sure it is a pure nitrate. The material I had did not turn blue on heating. Only the chloride shows this reversible reaction. The hydrated
chloride becomes very deep blue/indigo when heated and on cooling down it becomes reddish/purple again.
|
|
|
itchyfruit
Hazard to Others
Posts: 231
Registered: 15-6-2009
Member Is Offline
Mood: No Mood
|
|
No i'm not really, as i made it myself and as you can tell i'm not much of a chemist  The nitric acid is 70% lr grade from a fairly well known chemical company, the cobalt sulphate i'm not to sure about, it came via ebay and
it don't look to great.
If i get a chance tomorrow i'll pop down the local pottery supply shop and get some cobalt carbonate and give it another try, i'm not sure the
sulphate is any good for this purpose as i can't see how it can neutralise the acid to form a salt!!
|
|
|
snooby
Hazard to Self
Posts: 88
Registered: 24-5-2013
Member Is Offline
Mood: No Mood
|
|
What is an easy way to turn cobaltsulphate into the nitrate?
|
|
|
copperastic
Hazard to Others
Posts: 158
Registered: 15-3-2014
Location: In your basement
Member Is Offline
Mood: Good
|
|
It could be Nitropentaamminecobalt(III) chloride because that is purple.
|
|
|
Fantasma4500
International Hazard
Posts: 1681
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline
Mood: dangerously practical
|
|
snooby: assuming im not performing wrong spoonfeeding.. i suggest turning it into the carbonate and then reacting the carbonate with nitric acid
|
|
|
sasan
Hazard to Self
Posts: 92
Registered: 22-2-2014
Location: TEHRAN / IRAN
Member Is Offline
Mood: Radiative
|
|
Snooby do not use hydroxides to precipitate the cobalt hydroxide because it has some different hydroxides and oxides,and some of these would dissolve
in the acids
I suggest you seriously using sodium hydrogen carbonate because it would make cobalt carbonate,if you use sodium or potassium carbonate then cobalt
hydroxy carbonate forms(like copper hydroxy carbonate)
|
|
|
woelen
Super Administrator
Posts: 8014
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
With cobalt(II) precipitates you should not go through high pH. At high pH, the cobalt(II) species (e.g. hydroxide, basic carbonate) are oxidized by
air exceedingly easily and you end up with an impure mess of cobalt(II) and cobalt(III) species.
E.g. try adding some solution of NaOH to a solution of CoSO4.7H2O and swirl. Soon, you'll have a dark color near the surface of the liquid and on the
solid material sticking to the glass. This is due to oxidation of cobalt(II) to cobalt(III) by oxygen from air.
Follow sasan's advice. Precipitate with bicarbonate and filter, rinse. Then dissolve in as little as possible nitric acid and allow to evaporate
slowly in a warm and very dry spot. The nitrate unfortunately is quite hygroscopic so assure that the material can crystallize in a dry place.
|
|
|
snooby
Hazard to Self
Posts: 88
Registered: 24-5-2013
Member Is Offline
Mood: No Mood
|
|
The carbonate synth is probably the best option. Still i will just save my sulphate and buy some pure cobalt metal. Rather expensive stuff though.
Reason for asking is because I want to try BNCP synthesis with the cobaltnitrate instead of the sulphate. Yields are very poor. Also check the results
in the 5-ATZ deritaves topic plz
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
