D4RR3N
Hazard to Others
Posts: 271
Registered: 9-1-2007
Member Is Offline
Mood: No Mood
|
|
Cold steam using ultrasonics
Anybody here experiment with braking down water into cold steam using ultrasonics?
I have seen water humidifiers and fog generators which turn water into cold steam/mist and was wondering what frequency is used?
Is there one specific frequency and how does this work on a molecular level i.e. does the specific frequency relate to molecular resonance (natural
frequency of water)
|
|
|
not_important
International Hazard
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
It is just making very small droplets of water through mechanical means, you can do similar with very fine spray nozzles. The frequency is generally
chosen to be inaudible to most people.
And "cold steam" is a misnomer, it is simply a mist - a suspension of water droplets in air.
|
|
|
D4RR3N
Hazard to Others
Posts: 271
Registered: 9-1-2007
Member Is Offline
Mood: No Mood
|
|
The frequency must be important because the mist will only be generated at specific frequency's
Why would that be?
|
|
|
merrlin
Hazard to Others
Posts: 110
Registered: 3-4-2009
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by D4RR3N  | The frequency must be important because the mist will only be generated at specific frequency's
Why would that be? |
The operating frequency of ultrasonic atomizers is usually at or near the resonant frequency for the structure from which the droplets are emitted.
This provides the most efficient coupling of energy.
|
|
|
Twospoons
International Hazard
Posts: 1324
Registered: 26-7-2004
Location: Middle Earth
Member Is Offline
Mood: A trace of hope...
|
|
look up 'nebulizer'. frequencies from 500kHz to 2MHz. higher frequencies = smaller droplets.
Helicopter: "helico" -> spiral, "pter" -> with wings
|
|
|
Texium
|
Thread Moved
19-11-2023 at 13:06 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
