panziandi
Hazard to Others
Posts: 490
Registered: 3-10-2006
Location: UK
Member Is Offline
Mood: Bored
|
|
RB5 Vacuum Pump Edwards
I just got an Edwards RB5 vacuum pump off eBay and it seems to work (quickly plugged it in) but the vacuum and compressor inlets are threaded holes...
I need barbs to connect to thick rubber tubing to my glassware. Is anybody familiar with this model? If so does anybody know what I need exactly or
even have the parts spare?
|
|
|
watson.fawkes
International Hazard
Posts: 2793
Registered: 16-8-2008
Member Is Offline
Mood: No Mood
|
|
The manual should specify some size with "FPT" = female pipe threads. Go get a matching MPT = male pipe thread to barb adapter at your local plumbing
supplier or home store.
|
|
|
panziandi
Hazard to Others
Posts: 490
Registered: 3-10-2006
Location: UK
Member Is Offline
Mood: Bored
|
|
No manual  but I will measure the width and go to a plumbers tomorrow and see if
there will be any joy. Cheers!
|
|
|
chemrox
International Hazard
Posts: 2961
Registered: 18-1-2007
Location: UTM
Member Is Offline
Mood: LaGrangian
|
|
A plumber's supply might help. A commercial pressurized fluids and gasses handling supply house could be more helpful if there's one in your area.
We have one called, "Fluid Connectors" that has helped me with modifying vessels to incorporate fluid inlets and drains.
"When you let the dumbasses vote you end up with populism followed by autocracy and getting back is a bitch." Plato (sort of)
|
|
|
stoichiometric_steve
National Hazard
Posts: 827
Registered: 14-12-2005
Member Is Offline
Mood: satyric
|
|
usually, it's 3/8" threading. the outlet on my Edwards E2M1.5 is a 3/8".
|
|
|
panziandi
Hazard to Others
Posts: 490
Registered: 3-10-2006
Location: UK
Member Is Offline
Mood: Bored
|
|
I contacted Edwards UK for help. They will look into it and let me know hopefully on Monday. I'll check that size and make a note of it for when
Edwards ring me back. Lets hope I can have a spare part off them! Cheers all.
|
|
|
stoichiometric_steve
National Hazard
Posts: 827
Registered: 14-12-2005
Member Is Offline
Mood: satyric
|
|
| Quote: | | Originally posted by panziandiLets hope I can have a spare part off them! Cheers all. |
Edwards will most likely charge you much more than you paid for the pump itself just for the spare parts.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
