Pixicious
Harmless
Posts: 31
Registered: 28-1-2008
Member Is Offline
Mood: Smiley
|
|
Unknown compound.
Hi, I'll give you a quick background to what I did.
Ran a few experiments and the remaining mixtures I placed in a saucepan all together.
What I discovered happed was I have a crystal (a very NICE clear crystal which formed at the bottom of the pan)
At about 10C it is a solid.
At about 100-150C it is a liquid.
The crystal is formed, like the copper experiments we all did at school at some time or another.
The crystal is clear. I thought it might be salt but the melting temperature is too low.
It is a fragile crystal, so I thought that at about 20C it would melt.
Several chemicals I used that day were Ammonia Chloride, Sulphuric acid, Sodium hydroxide and potassium hydroxide.
I used a couple of others in small amounts.
If anyone knows what this sounds like it could be or has any ideas (unfortunately I left my ph reader at home so I couldn't tell the ph.)
The mixture had been allowed to stand for afew days for the crystals "to grow"
Any help would emence.
Pixicious
|
|
|
Duke
Harmless
Posts: 11
Registered: 26-2-2008
Member Is Offline
Mood: No Mood
|
|
You should cite the others. Listing only some doesn't really help. And it's foolish to randomly mix chemicals.
|
|
|
woelen
Super Administrator
Posts: 8012
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
It could be sodium sulfate 10-hydrate. This is a chemical which crystallizes well, forms big glassy/transparent crystals and "melts" when heated. It
is not true melting, but the solid looses its own water of crystallization and the remaining salt forms a solution in that.
Further, I have to agree with duke that it is not wise to mix chemicals without knowing what you do. If you keep on doing like this, then I would not
like to see you having stuff like KClO3 and other more or less energetic chemicals.
|
|
|
YT2095
International Hazard
Posts: 1091
Registered: 31-5-2003
Location: Just left of Europe and down a bit.
Member Is Offline
Mood: within Nominal Parameters
|
|
was there any Smell of Ammonia present at all?
in My opinion, the Least soluble of all those ions would be Potassium Sulphate, Sodium chloride and then ammonia gas given off.
However!.....
it Really all depends on how much of each was added stoichometricaly, without knowing that it`s Very hard (near impossible) to say.
\"In a world full of wonders mankind has managed to invent boredom\" - Death
Twinkies don\'t have a shelf life. They have a half-life! -Caine (a friend of mine)
|
|
|
Pixicious
Harmless
Posts: 31
Registered: 28-1-2008
Member Is Offline
Mood: Smiley
|
|
I figured a few might have a problem with me mixing random chemicals.
I am careful.
There was a faint ammonia smell.
Woelen is more than likely right these reminded me of coral reef looking crystals.
They were beautiful to look at.
[Edited on 14-3-2008 by Pixicious]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
