From a pdf called kitchen improvised, there is a composition of a nitric acid/polystyrene explosive. VoD it is said that it is at 7600M/sec.
Here is the manufacture process copy-paste from the pdf file
In a quart jar place 415 grams of 95% nitric acid (see nitric acid section). 85 grams of polystyrene powder is added.
Powdered polystyrene is made by placing the polystyrene foamed beads in a blender a few at a time. Blend at high
setting until powdered sufficiently. After adding all the polystyrene heat to 40 degrees C. in an oil or water bath with
stirring and continue stirring for 30 minutes. The compound will set up and become a tacky gell suitable for plastique
explosive applications
Has anybody try that ? it looks interesting as it looks easy to manufacture and its VoD is highDubaiAmateurRocketry - 5-11-2013 at 05:42
I would like to know the impact sensitivity.
If it is a gel, then it is advantages, you can mix it with other explosives to decrease their sensitivity while not losing any performance, and of
course, if the sensitivity of it is low in first place.VladimirLem - 5-11-2013 at 09:11
Has anybody try that ? it looks interesting as it looks easy to manufacture and its VoD is high
i havent, but it seems interesting...(for people without having "tons" of RDX or other high quality-HEs^^)
as far as i know, pure HNO3 have a VOD of 7600-7700m/s...
with adding this around 15% carbon conataining stuff you will get a strong (high leadblocktest amount) composition (optimal combustion of both
inerts)....if you looking for some fast explosive, then i would add only a few (3-8) percents of the polystyrene or other Carbon-containing stuff with
negative OB*...but then you will have some (acid-)explosive slurry (less good to handle i think^^)
*like Nitromethane, DNT
...and please dont mix ETN or other sensitive explosives into this...it will be damn dangerous
underground - 5-11-2013 at 11:39
Why negative OB ? The optimum is not the zero 0B ?Ral123 - 5-11-2013 at 12:29
Why would one even consider that crap? Do you know what nitric acid does in contact with flesh? What are you going to breathe in a room with this
cr*p? Fuming HNO3 is hygroscopic, that means if you leave it, it absorbs a lot of water. What happens if the styrofoam is not the right composition?
There are robust HNO3/NO2 mixtures that are at lease predictable.Dornier 335A - 5-11-2013 at 13:43
With 95% nitric acid, one could make RDX.
Mixtures with fuels like nitromethane and DNT are powerful, but very sensitive, corrosive and nasty to handle.
Quote:
as far as i know, pure HNO3 have a VOD of 7600-7700m/s...
Pure HNO3 can't detonate. Its decomposition is endothermic.DubaiAmateurRocketry - 6-11-2013 at 05:56
With 95% nitric acid, one could make RDX.
Mixtures with fuels like nitromethane and DNT are powerful, but very sensitive, corrosive and nasty to handle.
Quote:
as far as i know, pure HNO3 have a VOD of 7600-7700m/s...
Pure HNO3 can't detonate. Its decomposition is endothermic.
He probably meant pure HClO4 ? Dany - 6-11-2013 at 06:14
All the discussion in this thread are based on prediction and feeling without references. There is no much to learn!
Dany.VladimirLem - 6-11-2013 at 09:17
Quote:
Why negative OB ? The optimum is not the zero 0B ?
because HNO3 is (of course^^) positive in OB - mixing negative with positive will probably become better nearly zero in OB and will increase the combustion of both compounds...
Quote:
With 95% nitric acid, one could make RDX.
oh wow...and how much? if you dont have acetic anhydride, you 're fucked...
the ratio of needed chems and resulting explosives are MUCH better this way, the thread starter said...
Quote:
Pure HNO3 can't detonate. Its decomposition is endothermic.
maybe, i read US3306789 and a graphic shows the theoretical VoD of pure HNO3...i know that it will be able/much-better/eqasier to
ignite when there are carbon containing stuff in it...no one would try to detonate pure HNO3...would be a damn waste of containing energy
Quote:
All the discussion in this thread are based on prediction and feeling without references. There is no much to learn!
US3306789
Quote:
Why would one even consider that crap?
havent you been the one, praising the HNO3/Nitromethane composition at the "improvised shaped charges"-thread?
and will increase the combustion of both compounds...