latest glassware purchase

Quote: Originally posted by Heptylene

I just got an Anschütz-Thiele receiver, which is the german version of the Perkin triangle. I've been trying to find one for some time now since they cost an arm when new. Thankfully, ebay exists and an opportunity finally presented itself This is actually a really useful piece of equipment: it allows the collection of many fractions during vacuum distillation without having to bring the whole apparatus back to atmospheric pressure. Normally you are limited to 3-4 fractions if you're using a cow receiver, but not with this!

Heptylene congrat. Recently I managed to buy Anschütz-Thiele receiver too



here nicely explained how does it work:
https://www.bcp.fu-berlin.de/chemie/chemie/studium/ocpraktik...
https://en.wikipedia.org/wiki/Perkin_triangle

Some GL45 reagent bottles. I really like these! Although they are not exactly cheap, they are of high quality. There are red cap versions, which have a PTFE liner. The PTFE lined ones are even more expensive. Do you think that the blue cap bottles will suffice for most situations? When would you prefer the red caps over the blue caps?



[Edited on 29-11-2020 by HydrogenSulphate]

Quote: Originally posted by Db33

i posted that i needed some good dry/wet chem storage bottles. So i found a lot on eBay the guy was selling the lot for $85 but he accepted my offer for $50 so im very happy with the deal. You cant see it but theres also a top shelf with a lot of tiny vial sized bottles. I actually got this little cupboard specifically for this so i think its a pretty good start.

i found someone IN TUNISIA willing to sell me a flask for 6$ but the condenser is a bit expensive i guess 28$ but idk where to find adapter so i can use this just for reflux

Quote: Originally posted by HydrogenSulphate

When would you prefer the red caps over the blue caps?

I have been after some cheap SS 1/4" VCR hi vacuum/pressure gas fittings for some time. I finally won an auction on a job lot of used ones for £12.50. They arrived today. I did not win 55mm diameter vacuum valve that i also needed. That sold for more than £100.

So you guys probably saw these kits flood the Chinese shill vendors who may or may not have warehouses right next to you(but it always says they do).

Looks like the 'guild' has raised the price. My order went like this:
posted as ~$60 or best offer. Hmmmm, normally for $60USD i might get two of those items at best. So i went through his history for this item, and almost all the orders said "accepted offer". So brazenly, I offered $7 below asking. I said it was a great deal but i'm very poor. Response was warm and friendly. And discount #1: he countered at $3.00 below asking price. I said hell yes.
So then of course i get a tracking number that for over a week is stuck at "waiting for package to arrive at facility/" I know what this means. I sent him a message saying I thought that was a bit sleazy, since the marketing included a map of my country with regions showing either 1, 2, or 3 days! I was in the 2 day zone.
BAM: Instant Discount #2 - $10 refunded to my PayPal right away.

I kind of have to now confess that this is the best deal ever for glassware. It is branded, however the company's name is in Chinese characters. But the Glassware is up to par with Deschem if not better.
The cut out foam is now the 'case' for safe storage.
The leibig and the vigereux column are so much longer in real life than it looks like in the picture. This really makes a huge difference for distillations.
The addition funnel has some new design for its stopcock that I cannot explain. But somehow it allows both for perfect drip...drip.. control, and yet if a bunch of salt or gunk clog up the bottom, i can turn it and it all plops out. It's the perfect separation stopcock.
Yes I have enough 3-way adapters now to last me several life times.
Lastly: I was SURE i had received the wrong keck clamps at first, they looked like 19/x. Then I thought 'hmmm', with some extra thumb muscle, it snaps on, and it SNAPS on any joint. Like these keck clamps will hold big flasks and condensors while they patiently wait for me to find my support hardware(do not do that ever, so stupid)
(the thermometer went up to 100C and broke the first day. Nothing else has broken at all)

Quote: Originally posted by Fyndium

I don't know who and how these glassware are made, but for the price, someone's gotta do them very fast and easy, or then they get paid pennies. What I've watched glassware making videos, it's not difficult for a professional glassworker to churn out a pressure compensated funnel, but it still takes it's time. I mean, you get dozen of hours of work worth of glass with $60 including shipping.

One of the Dutch companies that's famous for making cannabis bongs a la scientific glassware has a documentary where they reveal their process.
Robots. Robots that can hold glass tubes, robots with 8 arms, each one with an oxy-acetylene torch extending simultaneously, and so on.

I have basic training in glass work, and you're absolutely right, if these were man made. The reason I say it's quality work is because i examined the usual stress spots. Such as inside meets water jacket meets air meets ground glass joint on a condenser. Traditionally this required a human's attention, as the thickness required is not linear relative to amount of glass. The Chinese are smart.

Why pennies to us is a working wage to them, is a matter beyond the scope of this chat of course=D


edit: here's a better pic. I tried my best to show probably my favorite piece in the set, and why it impresses me so much. One would really need to hold it, and use it, to see what I mean. That 2nd neck tangential to the overall sphere is not trivial.
[Edited on 31-1-2021 by earpain]

[Edited on 31-1-2021 by earpain]

This was my biggest glass purchase in my life, it arrived on pallet, usual way in carton / styrofoam box (as from ebay from China) was not sufficient now. I expanded my shopping activities abroad. I can buy all these items in my country too, but here they are 2-3-4 times more expensive.
I definitely suggest chemland.pl
There is a limit that you have to place and order of 150 EUR or above. The final price shown in eshop cart is without VAT. The VAT in PL is 23%.
The shipping cost of the pallet transport for me was 60 EUR (including VAT) for 1 pallet upto 150 kg, I'm living in the neighbouring country so shipping into further country is certainly more expensive, it seems they ship to the whole EU. When ordering less or smaller items which could fit into standard carton / styrofoam box instead to pallet the cost of transport could be very likely lower.
I couldn't make a photo of everything unpacked, so only the most valuable pieces for me - dropping funnels with pressure equalizing and long powerful condensers (the shorter one has 40 cm long active cooling part and the rest 60 cm).
The Glassco brand ground glass joints are higher quality, the Chemland brand ground glass joints have slightly less accuracy but still OK for home lab (grease fills and closes every gap). I selected Glassco everywhere possible (e.g. RBF).



[Edited on 9-2-2021 by Fery]

Been keeping the postman busy lately. Not pallets-of-stuff busy, but still.

Quote: Originally posted by Fery

long powerful condensers (the shorter one has 40 cm long active cooling part and the rest 60 cm)

Another good order from chemland.pl
Beats 2-4 times the prices of the glass sold in my country and still beats the prices of Chinese glass from ebay.
Palette size order again, the price of shipping dissolves in the value of items.
Not only glass but also a few of reagents.
The RBF in the cardboard box in the middle of picture from which only its neck and joint is visible is 6 L RBF.
Also few hundreds of vials and caps on the left side of RBF, I believe enough for the rest of my life. I used to use vials from pills which my grandmother took -but she is not with us already for decades.



[Edited on 8-3-2021 by Fery]

I won in an auction a beautiful historical glass piece made in Sklarny Kavalier CZ under brand name Sial, the manufactured later changed its brand name to Simax. Only 4 CZK which is 20 cents for this water vacuum pump, it arrived today by a postal service.

Quote: Originally posted by Fyndium

I don't know who and how these glassware are made, but for the price, someone's gotta do them very fast and easy, or then they get paid pennies. What I've watched glassware making videos, it's not difficult for a professional glassworker to churn out a pressure compensated funnel, but it still takes it's time. I mean, you get dozen of hours of work worth of glass with $60 including shipping.

Not glassware, but a professional vacuum pump from KFN Neuberger:



Chemical resistant, even for most aggressive gases. 8 mbar.

180 EUR including shipment. Shows that not too many people have money at hand anymore. Usually worth 600 EUR at least. New 1200 EUR.

recent glass order from daschem,e excellently packed per usual.

vacuum trap and the rest you'll recognize.

Going to do some sodium once my magnesium arrives and finally make 1, 4, dioxane via the FeSO3 method.

Deschem has served me great, too. They have improved their shipping recently, and shipments have been coming over pretty much consistently in 2-3 weeks, packed to withstand intercontinental damage.

I just received another order from them, nothing fancy, just a stock of some spare parts and an extra jack. Also I bought a short vigreux head to allow for better separation compared to straight distillation without greatly impeding flowrate.

The 50mL glass syringe is also fancy.

I have to say, deschem really improved their shipping times!
I had to re-order a few thermometers and simply bought twice as much... 7 working days only!
Impressive

Quote: Originally posted by earpain

So you guys probably saw these kits flood the Chinese shill vendors who may or may not have warehouses right next to you(but it always says they do). Looks like the 'guild' has raised the price. My order went like this: posted as ~$60 or best offer. Hmmmm, normally for $60USD i might get two of those items at best. So i went through his history for this item, and almost all the orders said "accepted offer". So brazenly, I offered $7 below asking. I said it was a great deal but i'm very poor. Response was warm and friendly. And discount #1: he countered at $3.00 below asking price. I said hell yes. So then of course i get a tracking number that for over a week is stuck at "waiting for package to arrive at facility/" I know what this means. I sent him a message saying I thought that was a bit sleazy, since the marketing included a map of my country with regions showing either 1, 2, or 3 days! I was in the 2 day zone. BAM: Instant Discount #2 - $10 refunded to my PayPal right away. I kind of have to now confess that this is the best deal ever for glassware. It is branded, however the company's name is in Chinese characters. But the Glassware is up to par with Deschem if not better. The cut out foam is now the 'case' for safe storage. The leibig and the vigereux column are so much longer in real life than it looks like in the picture. This really makes a huge difference for distillations. The addition funnel has some new design for its stopcock that I cannot explain. But somehow it allows both for perfect drip...drip.. control, and yet if a bunch of salt or gunk clog up the bottom, i can turn it and it all plops out. It's the perfect separation stopcock. Yes I have enough 3-way adapters now to last me several life times. Lastly: I was SURE i had received the wrong keck clamps at first, they looked like 19/x. Then I thought 'hmmm', with some extra thumb muscle, it snaps on, and it SNAPS on any joint. Like these keck clamps will hold big flasks and condensors while they patiently wait for me to find my support hardware(do not do that ever, so stupid) (the thermometer went up to 100C and broke the first day. Nothing else has broken at all)

Update: too good to be true is just that. However, this remains to be a great deal. It almost feels as though the worst glassware was mixed in with the best, for obfuscation.

Edited image is self-explanatory.
worth a mention:
* Addition funnel works, though 24/40 joint is gone
Condenser and Vigreux column seem to be indestructible(famous last words)
Crossed out glass stoppers represent proportion of the total. As there were stoppers lined around the entire package.
I treat my glassware a bit rough, but I prefer that to a 'walking on egg shells approach'.


My apologies for unintentionally misleading

I'm excited because I finally bought a sep funnel, 1L Erlenmeyer flask and beaker (with some tiny air bubbles in the glass but whatever) and 500ml reagent bottle with PP lid

Any tips for using these without breaking them?
Should I boil water in a glass to get it hot before boiling sulfuric acid in it?
Is it better to heat the glass as slow as possible to prevent thermal shocks?
And is paraffin wax bath good for boiling sulfuric acid?
Oh and the air bubbles! Should I be worried?

Estate sale!

Quote: Originally posted by Fyndium

160C is the gradient for boro. Although, when I cool down reactions that are hot, like 150C, I first use hot water, 50-70C, to bring it below 100, and then use cold water to finalize it to ntp. I don't know if anyone has yet tested it, but I suggested using air pump and bleeder tube to agitate sulfuric acid to prevent bumping. Also, I would use flask that is worth losing, like cheap 2L rbf, and it also needs a lot of heat, so it likely must be heated directly with propane gas. I've noticed that for effective boiling, thermal gradient must be over 20C with water-CaCl2 bath, and 50C with oil bath.

I feel this counts, or close enough. I ordered a few Geiger–Müller tubes from GSTube.com and they came the other day. Total 2 months in shipping lol, Mar 2 - May 6. But intact they were box was in great shape.

High Efficiency Condenser

Recent acquisition: Davies double jacket(300 mm) condenser

An "Ace Glass #7 Jacketed column" according to Ebay.
Actually a quartz immersion well.

The brown stains in the water jacket make me think the last owner though it was a cold trap and used it for vacuum distillations.



It does have some cheesy hose fitting jammed in the ace thread inlet.
Its jammed in the real hard, but I figure if a wrench won't loosen it I can just burn it out with a propane torch, and then dip the immersion well in a bathtub to cool it off.
Thermal gradients be damned!

[Edited on 13-11-2021 by SWIM]

Quote: Originally posted by arkoma

Estate sale!

I'd sure like to find out what the story is with Vineland, New Jersey.
It's the one city name I see most often associated with jointed glassware.

Ace Glass, Wilmad, and at least three other companies.
Now four counting the stuff you just bought.

If you heave a brick out a window in Vineland you must have a pretty good chance of hitting a glassblower with it.


Edit: LG glass and Bellco are there too.

Edit: @ S,C, Wack, thanks for the info.

[Edited on 13-11-2021 by SWIM]

[Edited on 13-11-2021 by SWIM]


[Edited on 14-11-2021 by SWIM]

What I always wanted

I finally fulfilled my long harbored dream and got me this:




The reactor. So tired of cleaning big flasks through tiny openings, no proper stirrer can be used for everything has to get through a small hole, I believe all flasks of 1000ml or larger should be outlawed and replaced by something like this.

Also this is much simpler to produce (at least the flasks, maybe not the heads) they are prohibitively expensive. But I was luck and found the probably best second hand lab equipment dealer in Germany ("secondlab" on Ebay Kleinanzeigen, nice guy, is aktiv on Illumina) and so I went for it.

Sadly he had only the 4 liter reactor flask and I got a 500 ml for a decent price elsewhere, but now I am searching for 1 liter and 2 liter and cannot find anything for a reasonable price. I would need the kind with the groove for an O-ring so any possible. And it is DN100.

The secondlab is really gold, the high performance condenser in the picture was about 30 € and I got an Anschütz-Thiele for 25 €, I seriously could not believe it. And it is all in decent shape, the important stuff is mostly Schott, some Jena some Mainz but this is all good IMHO, personally I prefer the thinner Jena glas over the very thick new kind as the heat transfer is so much better with thinner glass.

Anyways if somebody can help me finding those reactor flasks DN100, 1000 ml and 2000 ml that would be great!

thx
ORG

[Edited on 28-11-2021 by Organikum]

Quote: Originally posted by SWIM

Is that little heating bath okay? A lot of manufacturers of similar reaction vessels in the USA specify low watt-density heating (like mantles) to avoid cracking the thicker glass. Maybe I'm over-cautious, but if I don't have a mantle the right size I use a heat bath that covers a lot more of the vessel's body. [Edited on 28-11-2021 by SWIM]

Little vacuum sublimator and some new PTFE sleeves.
I loathe vacuum grease and these new sleeves are a dream.
My older PTFE (made in 2000) sleeves are thinner, unribbed and have a habit of getting stuck permanently on joints.. have to rip them off with pliers (damaging them in the process) when they're stuck.
Surprised there is so little information on PTFE joint sleeves available online.. would be nice to read a usage guide or some hacks.

Dumpster dive finds!

The only thing I paid was a few cuts from some broken glass. Well, that and all of the time invested in checking the dumpster each week for the last few years.

The results:

Boxes and boxes of glassware and equipment. Several 2 and 3 liter RBFs, a 3L sep funnel, 4 Friedrichs condensers, two Edwards RV3 vacuum pumps, one Welch 8907 pump, two Buchi r114 rotavaps with water baths, a thermo 6255 vacuum oven, a Fluke 412B HV PS, a thermo CL2 centrifuge, a Lytron mcs20g cooler, and a thermo electron 2870 shaking water bath, two cases of TLC plates, and a couple of variable reflux distillation heads.

Lots of other condensers, graduated cylinders, addition funnels, flasks, assorted ground glass adapters, gas valves, some quartz stuff, and more.

All of the equipment seems to work and I tossed all of the broken glassware already. Some things have minor damage but they work all the same.

I had to make several trips back to the dumpster to get everything. Like I said in my other post, apparently one of the chem professors retired and they cleaned out his lab. Lucky me!

I'm keeping most of it, but if something catches your fancy lmk and maybe we can work out a deal.

Just got myself a secondhand IKA Combimag-RET hotplate stirrer, to replace my wounded cheapo 79-1 hotplate stirrer.
Can't wait to put it to use, sadly it is staying in its box as we are in the process of moving house.

Quote: Originally posted by flaminglasrswrd

The only thing I paid was a few cuts from some broken glass. Well, that and all of the time invested in checking the dumpster each week for the last few years. The results: Boxes and boxes of glassware and equipment. Several 2 and 3 liter RBFs, a 3L sep funnel, 4 Friedrichs condensers, two Edwards RV3 vacuum pumps, one Welch 8907 pump, two Buchi r114 rotavaps with water baths, a thermo 6255 vacuum oven, a Fluke 412B HV PS, a thermo CL2 centrifuge, a Lytron mcs20g cooler, and a thermo electron 2870 shaking water bath, two cases of TLC plates, and a couple of variable reflux distillation heads. Lots of other condensers, graduated cylinders, addition funnels, flasks, assorted ground glass adapters, gas valves, some quartz stuff, and more. All of the equipment seems to work and I tossed all of the broken glassware already. Some things have minor damage but they work all the same. I had to make several trips back to the dumpster to get everything. Like I said in my other post, apparently one of the chem professors retired and they cleaned out his lab. Lucky me! I'm keeping most of it, but if something catches your fancy lmk and maybe we can work out a deal.

Today i get to use my Friedrich's condenser for the first time. i am just using it to reflux, which I know it is not really designed for. But it is still lots of fun.

Quote: Originally posted by Organikum

Anyways if somebody can help me finding those reactor flasks DN100, 1000 ml and 2000 ml that would be great!

My latest purchase. Looking forward to putting it to use.

Some 10 X 150 mm quartz test tubes with shipping came to $3.00 a piece from China.

Not glassware but most recent purchase that I am excited about, it came with more stirrers than listed so extra happy, to compliment it I ordered a Teflon stirrer and bearings (2 of them)

I'll be making a protective splash shield for it as well to ideally extend its life!

It is a 3 phase drive dc motor, very strong and smooth speed control

https://www.ebay.ca/itm/174250439099 < Canada

I'm very happy with it

Quote: Originally posted by HydrogenSulphate

Some GL45 reagent bottles. There are red cap versions, which have a PTFE liner.

you can buy yellow caps, orange, green, white transparent of silicone...

I've yellow caps/liners, silicone ones... the silicone is for high purity menstruums... the others, many are only for color coding and some few are for especial liquids/works.

check the catalogs!!! :-)


[file]95827[/file]

Uh... Why do I have 2 10ml quartz beakers on my desk ?

I got that in the mail today from China but I assume I would remember buying them / find a trace in my recent purchases on eBay!

Weird, but I'll take it

Quote: Originally posted by XeonTheMGPony

It is a 3 phase drive dc motor, very strong and smooth speed control

Quote: Originally posted by Herr Haber

Uh... Why do I have 2 10ml quartz beakers on my desk ? I got that in the mail today from China but I assume I would remember buying them / find a trace in my recent purchases on eBay! Weird, but I'll take it

Galileo thermometer from here: https://shop.es-drei.de/laborbedarf/laborzubehoer/13578/ther...
It was a reagent order, but I added this toy into the basket too.
When cold, everything floats on the top, that was also the case when I got the parcel (winter here). Now burning firewood in my stove so quite warm here, most of balls sank to the bottom and the one floating is telling 26 C.



[Edited on 7-12-2022 by Fery]

Quote: Originally posted by Fyndium

Quote: Originally posted by XeonTheMGPony   It is a 3 phase drive dc motor, very strong and smooth speed control These overheads are beyond superior bang for buck. They are very silent, smooth running, have freely adjustable rpm and have a lot of torque. They merely register when running 10 liter volume reactions and can run days non-stop. Once you get to see one of these, you will loathe over any magnetic stirrer for the rest of your life. It's more like comparing toothbrush or a PC fan to a small drill press in performance. The stand included is also of exceptional quality and rigidity and weights several kg. The C-shaped stand is cast iron, and the two-piece shaft is 16mm steel with what looks like M10 thread. It could likely hold up your body weight no problem, the only major downside is it's very short, so you'd need to mount the motor to a 16mm round bar or a threaded rod mounted to a table or fume hood yourself. The stands excel as sep funnel or other tool holders. You'd best get flexible shaft mount designed for linear controllers for 3D printers to mount a PTFE stirrer to the motor shaft. Set screw installation also ensures the stirrer won't drop into the flask and smash through the bottom during operation, especially vacuum. They seem to work quite well with vacuum operations with PTFE ground joint bushing and fluorine rubber o-ring and paraffin oil lubrication. It will cut the high vacuum most likely because it naturally leaks a little, but it still enables distilling ~250C boiling liquids at 120-140C. High performance stirring improves reactions a lot by consistent and strong mixing and thermal balance, which enables both less or more cooling or heating depending on what is desired, and it creates similar effect to rotavap when distilling - stripping solvents that is - allowing you to input a lot of heat without bumping and it increases evaporation rate. Funny enough I would say they are overkill for smaller than 2L flasks and really get to their working range with 5-10L flasks minimum and could likely stir reactions to 20-50 liters with zero issues over protracted times, hence they also suit for purposes like stirring mash for fermenting alcohol.

My bearings arrived! very nice given the cost of em, love the feel of solid Teflon!

I got it for trying to make Acetic anhydride via our deal late friends post in the reference section

I'll be using Silicon grease for one, but oil is a good idea as all, was wondering what I could use other then the grease, now I know!




[Edited on 7-12-2022 by XeonTheMGPony]

Quote: Originally posted by Organikum

. The original 7 mm O-rings leave bad grooves on the shaft in no time, not good at all.

Quote: Originally posted by Organikum

I suppose you will be using the PTFE coated stirrers with this. I recommend to buy a few Viton or other Fluoropolymere O-rings with nominally 8 mm ID. Those are always a little bit tighter then nominal and the 7 mm shaft is actually wider the 7 mm. So using a 8 mm O-ring is perfect as it will be squeezed tighter when it gets screwed down. The original 7 mm O-rings leave bad grooves on the shaft in no time, not good at all. It is possible you have to widen the seating of the O-ring a little bit so it sits nicely centered but thats no problem using a 12 mm metal drill or similar item. You use it by hand, not in the drill of course!

Ironically I am working on finding some better vitron o rings for it, and my second teflon stirrer I ordered arrived along with my balls for the mill! The one that came with it wasn't going to clear with a claison adapter in the mix

ignore the heater pad, that's for my genset.

Ordered me a new distillation head a few weeks ago, and she just came in.
Actually, I broke 3 claisen adapters trying to make this before I called a professional

https://www.clearhorizonsglass.com/
Gonna break her in this weekend.

My last toy, a 500 ml custom made big mouth flask

Oh, now I can remove easily the vegetal matter from it!!

Cute isn’t it?

Wowzer!

Usually when I go to my local Renaissance store (Goodwill) near my house, I see the occasional beaker, but rarely any glassware worthy of my attention. Obviously, It's not the place really for high-end laboratory equipment!

But this caught my attention this morning!!! I could not pass these up!!!

From Kimax, two very large graduated cylinders, one is 500 ml, the other is a 1.5 l behemoth !!! What are those doing at Renaissance? Pretty happy finding these!

I bought a few of these quartz tubes for 16 dollars each plus shipping just to tinker with and was wondering what they might be used for. They each came in sealed double plastic bags and have an etched number on them so they don't seem your ordinary UV quartz sleeve. The open end is a thicker quartz not some plastic adapter. There's a similar 27.5 inch tube on eBay for $407.00 --
(Xycarb Ceramics 10320565 Quartz Tube 27.5")
The open end is a 2.12" outer diameter and the rest 1.49" OD.



[Edited on 13-4-2024 by Morgan]

A purchase of 6 quartz tubes to try some thermoacoustic experiments or with
ornamental feathers, indigenous ceremonial peace pipes of some sort. 17 mm OD X 43 cm length to the elbow.

A simple experiment some months ago with mixed results.
https://www.youtube.com/watch?v=ktb_pgJWTc8






[Edited on 1-5-2024 by Morgan]

Not having anything in mind but since they were for a dozen quartz tubes I offered the small amount of $25 and won the bid. They were new old stock, 10 of the taller ones and 2 shorter that were still in sealed decaying plastic bags in an old partitioned cardboard box. They are Leco combustion tubes or as another eBay seller describes them a "172MM*35MM high frequency infrared carbon and sulfur analyzer quartz tube". There're several sellers and it looks like the going price for a same/similar non-brand is around $45.00 a tube.

An "enthralling" video of how they are loaded into this machine.
LECO Corporation - CS844 Carbon and Sulfur Determinator
https://www.youtube.com/watch?v=EdBtWt1IQDs
And another perspective
https://www.youtube.com/watch?v=PbsxQgAQ5zU

And a free gift which I don't know as of yet what I would use it for.




[Edited on 1-5-2024 by Morgan]

I thought I was buying a fused quartz dish 150mm x 140mm diameter, thick 5mm wall petri dish because I couldn't see the photos very well on eBay, occluded by the glare and somewhat opaque bags it came in.

"Was $149.99 (75% off) $37.50 or Best Offer" I won bidding $32 and the $21.00 shipping cost.

DESCRIPTION

"GM 150mm and 140mm Fused Quartz Round Flat Bottom Lab Dish"

"This lab dish is specifically designed to meet the needs of medical and laboratory professionals. With a fused quartz material, it provides a durable and reliable surface for a variety of applications. Measuring 150mm and 140mm in diameter, it offers ample space for mixing and holding samples."

"The dish is manufactured by GM and features the model number 551-031400-1. Its round, flat bottom design ensures stability and prevents spills. Ideal for a range of medical and lab procedures, this dish is a must-have for any professional in the field."

The package arrived with two dishes, one sort of resting partially in the other. The bottoms are a heavy 10mm thick, the larger 150mm diameter dish with a 68mm high wall. Together the two weigh a little over 1 kilogram. Now to find a good use for them.