| Search |
| [Next Page] |
Creating static electricity in a very vigorous chemical reactions.
If you are interested in electrostatic generation look up a Van de Graaff generator and a Wimshurst ... |
12-7-2022 at 12:48
by: Mateo_swe |
Replacing the inner sleeve on a heating mantle
First remove the outer top cover, i see screws on the side but sometimes they have used some glue to ... |
12-7-2022 at 10:27
by: Mateo_swe |
No KClO3 formation in chlorate cell?
Regarding the added dichromates, i maybe have to find a way to precipitate them and filter to clean ... |
20-6-2022 at 01:06
by: Mateo_swe |
Replacement of Pd/C by powdered catalytic converter for hydrogenation reactions.
Interesting.
How was the catalyst powder harvested from the converter?
Just crushing the chunks ... |
19-6-2022 at 09:29
by: Mateo_swe |
No KClO3 formation in chlorate cell?
Im also planning on making some chlorate and later some perchlorate.
I have ordered a MMO and titan ... |
17-6-2022 at 05:53
by: Mateo_swe |
2,5-dimethoxybenzaldehyde question
Is all forms of nitromethane banned?
Even the methanol/nitromethane racing fuel for model cars and ... |
17-6-2022 at 03:06
by: Mateo_swe |
Preparing ethanol from a sugar wash treated with Sodium carbonate
No, i just mix them and keep indoors in the boiler room where its slightly warmer.
I just dump 6kg ... |
16-6-2022 at 06:15
by: Mateo_swe |
Preparing ethanol from a sugar wash treated with Sodium carbonate
Hmm, i have made much vodka in the past and im getting a quality where it tastes almost nothing and ... |
16-6-2022 at 05:00
by: Mateo_swe |
Isopropyl nitrite to sodium nitrite
There must be a source of NaNO3 somewhere, its used for so much things.
But with no NaNO3 i would t ... |
16-6-2022 at 04:09
by: Mateo_swe |
Preparing ethanol from a sugar wash treated with Sodium carbonate
Is the ethanol produced meant for drinking, ie. vodka?
If you make the fermentation with just commo ... |
16-6-2022 at 03:40
by: Mateo_swe |
Readily Available Chemicals Website: Version 2
[rquote=668337&tid=3254&author=ViktorVaughn]Is there some general beginner guide on here som ... |
16-6-2022 at 01:43
by: Mateo_swe |
Preparation of Succinic Acid
I have also bought some dirt cheap Pd/C from China some time ago, i havent even opened the jar yet b ... |
10-6-2022 at 10:37
by: Mateo_swe |
OTC Vanilin
Would that cobalt oxidation in methanol work on other aromatic substrates to make the corresponding ... |
10-6-2022 at 07:59
by: Mateo_swe |
What can i make from this compounds?
Are you absolutely restricted to these compounds or just got them and wanted to use them or somethin ... |
10-6-2022 at 07:24
by: Mateo_swe |
European firework material supplier
I have sent them a mail, hopefully i can place the order.
Making DIY paper hemispheres are probab ... |
10-6-2022 at 04:51
by: Mateo_swe |
European firework material supplier
Seems like Cooperman´s webshop isnt working.
I added a bunch of items to the cart, proceeded to ch ... |
10-6-2022 at 00:06
by: Mateo_swe |
European firework material supplier
Thank you very much.
I see if i can order some hemispheres from Cooperman.
I have thoght about m ... |
9-6-2022 at 22:22
by: Mateo_swe |
European firework material supplier
Im looking for an European firework material supplier that sells 4" paper hemispheres for DIY ball s ... |
9-6-2022 at 03:26
by: Mateo_swe |
Rare and hard to obtain chemicals for sale
Another order from chemship1978 received and everything is included and good packaging.
I really ca ... |
8-6-2022 at 03:22
by: Mateo_swe |
Ball Mill (3D printed parts)
I searched for the info where it said PVC was not suitable for ball-mill drums but i cant find it no ... |
8-6-2022 at 00:47
by: Mateo_swe |
Ball Mill (3D printed parts)
The big brushless motor i have is 120kv, max 150A, several kilowatt in max rating.
Its meant for el ... |
7-6-2022 at 09:11
by: Mateo_swe |
DIY heated oil-bath with temp control
Although i have some 32-bit development boards i would like to buy a plug and play solution.
The he ... |
5-6-2022 at 02:15
by: Mateo_swe |
Ball Mill (3D printed parts)
I was thinking about using my big brushless motor designed for a skateboard and a belt and pully lik ... |
5-6-2022 at 01:50
by: Mateo_swe |
PTFE coating easily done
I once saw PTFE 3D printing filament but i cant find it now.
Not really relevant for coating stuff ... |
4-6-2022 at 23:54
by: Mateo_swe |
Modifying an existing stir plate with a stronger magnet
You used a heating mantle placed on a stirrer unit, right?
If the temperature under the mantle wher ... |
4-6-2022 at 23:34
by: Mateo_swe |
| [Next Page] |
