Sciencemadness Discussion Board
Not logged in [Login ]
Search the forums Search   Frequently Asked Questions FAQ   View member list Member List   Today's Posts Today's Posts   Forum Stats Stats Back to: sciencemadness.org
Sciencemadness Discussion Board » Search Go To Bottom

Search
[Next Page]
why not use tin as the substrate
If not willing to mine for the knowledge, then worthiness to posses it is suspect. 		27-4-2015 at 03:08
by: hyfalcon
why not use tin as the substrate
Until you show the effort and read the available material that's available on this site, you will fi ...		 23-4-2015 at 04:33
by: hyfalcon
Lead dioxide anode-possibility of an unusual synthesis method
Sticky at the top of Techno-chemistry.

https://www.sciencemadness.org/whisper/viewthread.php?tid= ...		 20-4-2015 at 18:49
by: hyfalcon
Washing?/drying calcium sulphate
Has anyone seen LG since this post? I'm worried about his health. 		16-4-2015 at 16:23
by: hyfalcon
Copper(II) Acetate precipitation?
Those pennies are mostly zinc. You need pre-1982 pennies for 90/10 copper/zinc alloy pennies. As B ...		 16-4-2015 at 14:13
by: hyfalcon
Simple energetics
Intimate mixing and fineness of ingredients makes for successful BP. 		13-4-2015 at 07:25
by: hyfalcon
Game: Chemistry from natural resources only
Take the knowledge and make your own project if you have an interest. Don't wait for someone else's ...		 12-4-2015 at 03:02
by: hyfalcon
List of chemicals available in Brick-and-mortar hardware/pool/automobile/pharmacy/grocery stores (IN PROGRESS)
This link is in the sticky at the top of this section.

http://www.hyperdeath.co.uk/chemicals/supp ...		 9-4-2015 at 03:54
by: hyfalcon
List of chemicals available in Brick-and-mortar hardware/pool/automobile/pharmacy/grocery stores (IN PROGRESS)
I kind of doubt that.

http://www.texasclay.org/page-714151

http://trinityceramic.com/ceramic-c ...		 7-4-2015 at 15:34
by: hyfalcon
Dioxane
You might want to tell us which reaction you are attempting. 		4-4-2015 at 06:25
by: hyfalcon
Distilling Sulfuric Acid
Try an aquarium air pump. Meant to run continuously. 		4-4-2015 at 06:14
by: hyfalcon
Moonshiners #2 Proofing: Myth or Reality
Damn if that don't kinda look like Tickle on the left. 		26-3-2015 at 07:18
by: hyfalcon
Factice rubber-based propellants from vegetable oils
Try vacuum. 		23-3-2015 at 04:49
by: hyfalcon
Supplier Legitimacy
I used to live in KY. They have a will call desk so I would pick my order up. 		20-3-2015 at 18:42
by: hyfalcon
Boiling down Sulpuric Acid
Small amount of dissolved SO[sub]3[/sub] would throw this off wouldn't it? 		20-3-2015 at 04:36
by: hyfalcon
Supplier Legitimacy
[rquote=397633&tid=61848&author=Loptr]
Antec is a place I plan to order from at some point. ...		 20-3-2015 at 04:28
by: hyfalcon
Ammonium nitrate as propellant
Here's what I use In my ball mills:

http://www.ebay.com/itm/Alumina-GRINDING-MEDIA-BALLS-1-2-diam ...		 12-3-2015 at 04:20
by: hyfalcon
Poll: Which solvent smells the best?
[rquote=396627&tid=61775&author=Bert][rquote=396581&tid=61775&author=diddi]AMOS, I T ...		 12-3-2015 at 04:11
by: hyfalcon
DIY Moonshine Still
You know, as thick as that lid is, I would suspect it being aluminum instead of stainless steel. 		25-2-2015 at 06:49
by: hyfalcon
Moonshiners' 'Thumpers': Myth or Reality?
If you want an improved design WITHOUT a thumper. Check this out.

http://www.hillbillystills.com ...		 20-2-2015 at 09:00
by: hyfalcon
Druken Aga Challenge (DAC) #3 - Closed (but open to discussion)
Hey, my coffee roaster works on the same principle. Hmmm.... 		2-2-2015 at 07:26
by: hyfalcon
Butanole and other potential fuels from fermentation
acidify with citric acid to a pH of 4.5-5.0 and heat to around 80C for 40-45min. Don't boil the mas ...		 29-1-2015 at 06:50
by: hyfalcon
want transparent container for molten NaOH
"Solar Salt", see wiki.

http://en.wikipedia.org/wiki/Eutectic_system

Looks viable if you can c ...		 20-1-2015 at 07:37
by: hyfalcon
Long chain molecule oil?
Try Lucus. It's like honey oil. Sticks like honey too. 		12-1-2015 at 17:17
by: hyfalcon
Live in USA and buy fuse? READ.
Guess it's time to dig out and polish up the plans on the fuse machine. 		12-1-2015 at 07:10
by: hyfalcon
[Next Page]

 Sciencemadness Discussion Board » Search   Go To Top