| Search |
| [Next Page] |
cheddite
I hate those kind of websites, books, manuals like you linked there. |
29-12-2013 at 20:27
by: Turner |
How much do explosives cost?
At the ski resort I go to, they light These 2lb pentolite hand charges left and right all day long f ... |
29-12-2013 at 17:40
by: Turner |
Primary Explosive questions
"The more brisant the booster is the shorter the overall time of the explosion is"
What do you me ... |
29-12-2013 at 08:18
by: Turner |
Primary Explosive questions
And you are going to detonate that where? |
28-12-2013 at 13:43
by: Turner |
Toluene
I ended up buying 1 gallon of "Klean-Strip" Toluene at ACE HARDWARE |
28-12-2013 at 12:46
by: Turner |
Nitrating toluene with KNO3
Does "Klean-Strip" Toluene contain thiophene? |
28-12-2013 at 08:59
by: Turner |
Nitrating toluene with KNO3
Bot0nist, you always push your "UTFE" stuff, but could you post a link or a reference to the nitrati ... |
28-12-2013 at 08:49
by: Turner |
ANFO source materials
I doubt that diesel straight from the pump at a gas station wouldn't work, it only ends up making 6% ... |
27-12-2013 at 15:18
by: Turner |
ANFO source materials
I was just going to test this. The prills straight out of a cold pack are dense, and while I know it ... |
26-12-2013 at 20:17
by: Turner |
Primary Explosive questions
B0tonist, TNP is a poor base charge in a blasting cap for it's reactivity (with metal and metal salt ... |
26-12-2013 at 15:08
by: Turner |
cheddite
Cool why such a way to light the fuse? |
26-12-2013 at 14:53
by: Turner |
When to use excess of reagents?
90% won't react, I dilute it to around 45-65% and that works well.
47g of HNO3 is the stoic amoun ... |
26-12-2013 at 08:00
by: Turner |
When to use excess of reagents?
Using 4Ag+6HNO3 --> 4AgNO3 + 3H2O + NO2 + NO
54g of Silver needs 48g of HNO3, or 38ml approx. ... |
25-12-2013 at 15:59
by: Turner |
Nitric Acid and Silver Nitrate
Using 4Ag+6HNO3 --> 4AgNO3 + 3H2O + NO2 + NO
54g of Silver needs 48g of HNO3, or 38ml approx. ... |
24-12-2013 at 10:24
by: Turner |
Sodium Bisulfite in TNT synth.
As for the ETN rocket propellant thing, I thought it wasn't that unreasonable as I have read about o ... |
23-12-2013 at 20:35
by: Turner |
Sodium Bisulfite in TNT synth.
Ok, so sodium bisulfite is used in solution of water and molten TNT to clean out the TNT (other isom ... |
23-12-2013 at 18:50
by: Turner |
Sodium Bisulfite in TNT synth.
*sulfite |
23-12-2013 at 14:54
by: Turner |
Sodium Bisulfite in TNT synth.
Ok I see. So sodium bisulfite can be used to produce Oleum in the reaction mixture, which dehydrates ... |
23-12-2013 at 13:48
by: Turner |
Sodium Bisulfite in TNT synth.
Oh, I think it is implying the sodium bisulfite salt with "SO3." |
23-12-2013 at 13:00
by: Turner |
Sodium Bisulfite in TNT synth.
What is the purpose of sodium bisulfite in the making of TNT? pure sulfuric acid with 15% SO3 is add ... |
23-12-2013 at 11:14
by: Turner |
Re-Homing excess Nitric & Sulphuric Acid (NZ)
Be sure of who you sell that to, that's a good amount of nitrating material there. |
22-12-2013 at 18:07
by: Turner |
ETN/Binder safe enough rocket fuel?
Hi,
I have found that ETN alone is very hard to initiate (burn) by flame. However, ETN and PIB ... |
22-12-2013 at 17:26
by: Turner |
Sharing some information and experience on Ammonium perchlorate, Potassium nitrate-sucrose, and Zinc Sulfur based propellants.
It looks like the thrust on the motor second down is going a bit to the right?
Also, in the pictu ... |
22-12-2013 at 07:48
by: Turner |
Al/KNO3 -- No reaction
And RDX is roughly -21% by weight, so would trying a propellant that is about half RDX and half Ammo ... |
21-12-2013 at 07:44
by: Turner |
Al/KNO3 -- No reaction
How does AP compare to some materials that are usually used for thei detonations (ETN, RDX, HDN, AN ... |
20-12-2013 at 20:29
by: Turner |
| [Next Page] |
