| Search |
| [Next Page] |
Armodafinil
Any info on this new beast from Cephalon? I've not found clear information on how it differs in its ... |
27-3-2006 at 17:53
by: Quince |
Need machine vision camera
That doesn't sound right. It's 12 Mb/s not MB/s, so you're off by a factor of 8. That would make i ... |
22-3-2006 at 17:26
by: Quince |
Need machine vision camera
[quote]I don't understand what you're saying.[/quote]
What I meant was transferring a lower resolut ... |
21-3-2006 at 14:56
by: Quince |
Need machine vision camera
The problem is I can't use the camera's internal downsampling method as it's far from optimal plus I ... |
21-3-2006 at 02:57
by: Quince |
Need machine vision camera
Yes, I can just use hdrshop to get the response curve from multiple exposures. Thanks for your help ... |
10-3-2006 at 22:22
by: Quince |
How do I use a graphite crucible?
Tell me Tim, what's the easiest way to do this induction heating thing? |
10-3-2006 at 01:06
by: Quince |
Need machine vision camera
How would I choose among the Canon cameras? I can't find any listings on the details I'm interested ... |
10-3-2006 at 01:01
by: Quince |
Need magnesia crucible
So I got the crucible today. It says it's good to 2200*C, but creep occurs at above 1200*C, so it s ... |
9-3-2006 at 14:43
by: Quince |
condensers
Use an aquarium pump. You can get a 200 GPH powerhead for under $20. |
9-3-2006 at 14:41
by: Quince |
DIY drycleaning
Sweet. Thanks man! |
9-3-2006 at 03:30
by: Quince |
DIY drycleaning
I want to try DIY drycleaning. Where do I get me some perchloroethylene? |
8-3-2006 at 18:19
by: Quince |
condensers
What the...
Yes, the glass is somewhat thinner, but the larger diameter of the inner tube is the ma ... |
6-3-2006 at 21:37
by: Quince |
Need machine vision camera
I'm asking about the microscope camera as I found a nice one for $200.
I'm wary of consumer camer ... |
6-3-2006 at 20:30
by: Quince |
Need machine vision camera
Is it very hard to convert a microscope camera for such a use? Or is something like aligning a diff ... |
6-3-2006 at 19:32
by: Quince |
How do I use a graphite crucible?
I'm curious how one would go about DIYing a suitable vacuum furnace. Has anyone here done something ... |
5-3-2006 at 22:39
by: Quince |
How do I use a graphite crucible?
So it doesn't burn up? I don't know how to keep oxygen off it and how to heat it best.
The one I ... |
4-3-2006 at 23:11
by: Quince |
Need machine vision camera
Frozen fish? I was going to say the cat, but...
Algebraic methods are more general than Fourier ... |
3-3-2006 at 20:33
by: Quince |
Need machine vision camera
Who's using Fourier slice? I'm using SART reconstruction for cone beams per Mueller's paper. I nee ... |
3-3-2006 at 00:04
by: Quince |
Need machine vision camera
A significant fraction? 1/3 is a small fraction. Squared-falloff with distance is an even bigger a ... |
2-3-2006 at 22:03
by: Quince |
Exotic thermites & analogs
I don't see how you can DIY powder this fine. |
28-2-2006 at 05:50
by: Quince |
Need machine vision camera
You better correct this Wikipedia article then, as it says up to 200 kV penetrates tissue no more th ... |
28-2-2006 at 01:06
by: Quince |
Need machine vision camera
100 keV has less absorption in the body. Much of it will go through. |
23-2-2006 at 23:27
by: Quince |
Need machine vision camera
Well, I've found nothing under $500 this far (only new cameras). In sci.image.processing I got no ... |
21-2-2006 at 05:17
by: Quince |
Nepetalactone extraction
In the attached 2005 paper, under traditional method (procedure B in the experimental section), they ... |
20-2-2006 at 00:03
by: Quince |
Nepetalactone extraction
I'm unable to access the site.
Why do you have to be so difficult and not at least post the citatio ... |
19-2-2006 at 20:16
by: Quince |
| [Next Page] |
